How tall is a basketball hoop in inches

How Tall is a Basketball Hoop - Has it Ever Changed in Height?

Ever wonder what the height of a basketball hoop is when watching a game? A lot has changed over the years in professional basketball from the concept of dribbling, the three-point line, the basket itself, and even the backboard material, but one thing remains consistent: how tall an NBA basketball hoop is. A professional basketball hoop is always teen feet high from the floor to the top of the rim.

So why is the basketball hoop height ten feet high off the ground? Is the size of the hoop the same across the WNBA, FIBA, NCAA, High School, and more? Here is the complete breakdown of the height of a regulation basketball hoop!

Why is a Basketball Hoop Ten Feet Off the Ground?

James Naismith was the inventor of the game of basketball in 1891 out in Springfield, Massachusetts. During that year, he hung peach baskets off the running track guard railings at the YMCA, ten feet off the ground, for players to shoot at. After every basket made by a player, the game would pause to get a ladder to retrieve the ball, which was a soccer ball, at that time.

Eventually, iron hoops and a net replaced the peach baskets, which removed a ladder to retrieve a ball during a game.

How Do you Measure the Ten Feet for a Hoop?

The ten-foot measurement for a basketball hoop is from the height of the rim to the floor. The teen feet measurements are not from the bottom of the net, which fans might not know. The height takes the top of the rim since that is how high the ball needs to be to go into the hoop.

How Tall is a Basketball Hoop in the NBA?

A professional NBA hoop is ten feet from the top of the rim to the bottom of the floor. However, while the hoop’s 10 feet is the same, the average height of basketball players continues to grow over the years, which is why dunking is more common in today’s game. According to The Hoops Geek, players from the 2021 – 2022 season were 6’6″ tall on average. Back in 1952, the average height of a player was 6’4″ tall.

​

How Tall is a Basketball Hoop in the WNBA?

A WNBA hoop stands at ten feet tall from the top of the rim to the base of the floor. According to TFI Global News, the average height of a female basketball player is 5’11”. Comparing that to the NBA, which is seven inches taller on average, you can understand why dunking is less common in the WNBA.

How Tall is a Basketball Hoop in FIBA?

The basketball hoop for the Olympics and all professional leagues worldwide stands at ten feet tall.

How Tall is a Basketball Hoop in NCAA Basketball Games?

NCAA basketball (men’s and women’s) is ten feet from the top of the rim to the base of the floor.

How Tall is a Basketball Hoop in High School and Middle School?

Basketball hoops in High School and Middle School leagues are ten feet from the base of the floor to the top of the rim.

Does the Rim Height Change in Youth Basketball Leagues?

Youth basketball leagues have different heights for the rim on basketball courts. Kindergarten leagues will have hoops being seven feet tall. Meanwhile, fifth graders will have the hoop at nine feet tall. It is not until you get to sixth grade that the hoop goes to standard ten feet height.

How Big is the Basketball Backboard?

A regulation-size basketball backboard is 6 feet wide by 3.5 feet tall.

How Big is the Basketball Rim?

A regulation-size basketball rim is 46 inches in diameter.

Did the Hoop Size Ever Change in the NBA?

In 1954, the NBA ran a test raising the basketball hoop to 12 feet for one game. The reason to have 12-foot rims was to stop George Mikan from dominating the game since he was close to seven feet tall. The game that had the test was between the Milwaukee Hawks and the Minneapolis Lakers.

However, that test only lasted one game. The trial concluded that while it did stop George Mikan from dominating, it didn’t produce good results for the game. The hoop being taller made the game even more dominating for taller players to gather rebounds against shorter basketball players.

Why Do Basketball Hoops Have a Net?

Basketball first began with peach baskets that players would try to get the ball into when they would shoot. An iron hoop replaced that peach basket as the years went by, which allowed the ball to go through on a successful shot. No longer was a ladder necessary to retrieve balls after a successful shot.

Why Do Basketball Hoops Have an Orange Rim?

During games, the orange rim stands out for fans, coaches, refs, and players to see. The orange paint also helps spot goaltending violations if a player swats the basketball away as it is coming down towards the basket.

Can Players Change the Hoop Regulation Height During a Dunk Competition?

NBA players who partake in the dunk competition always like to put on a show for the fans. In 2009, Dwight Howard did just that by bringing in a basketball hoop that was 12 feet in height. He came out with a superman cape and was able to perform the dunk to the delight of the fans at the All-Star Game event.

Conclusion: How Tall is a Basketball Hoop?

In summary, a basketball hoop across professional leagues is ten from the top of the rim to the bottom of the floor. The ten-foot height dates back to 1891 when the basketball game took place in a YMCA in Springfield, Massachusetts. During that time, peach baskets were on the railings of the track, and players would shoot a ball into the basket to score points. While many elements of basketball have changed over the years, the height of a basketball has not.

Similar Posts:

Field Goal Basketball

What is a Rebound in Basketball?

Top of the Key Basketball

Technical Foul in Basketball

Basketball Swish

ISO Basketball

Tip off in Basketball

Slam Dunk

Free Throw in Basketball

How Long is NBA Halftime?

Backcourt Violation in Basketball

Double Rim Basketball Hoop

Triple Double in Basketball

Paint in Basketball

How Long is a Basketball Game?

Basketball Hoop & Backboard Dimensions & Drawings

Sports

>

Basketball

In basketball, the basket is comprised of a hoop (net) attached to a flat backboard (vertical glass board). Regulation basketball hoops are suspended 10’ | 3.05 m from the playing surface and have a standard rim diameter of 18” | 46 cm. The vertical backboard surface is made of plexiglass or tempered glass to prevent shattering and is sized at 42” x 72” | 110 x 183 cm. Basketball rims are manufactured from high tensile carbon steel to provide the ball with the correct amount of bounce while also having give for players that can dunk.

In basketball, the basket is comprised of a hoop (net) attached to a flat backboard (vertical glass board). Regulation basketball hoops are suspended 10’ | 3.05 m from the playing surface and have a standard rim diameter of 18” | 46 cm. The vertical backboard surface is made of plexiglass or tempered glass to prevent shattering and is sized at 42” x 72” | 110 x 183 cm. Basketball rims are manufactured from high tensile carbon steel to provide the ball with the correct amount of bounce while also having give for players that can dunk.

Upgrade to Pro

*Under Development*

Height:

Width:

Depth:

Length:

Weight:

Rim Height: 10’ | 3. 05 m
Rim Diameter: 18” | 46 cm
Backboard Height: 42” | 110 cm
Backboard Width: 72” | 183 cm
Backboard Area: 21 ft2 | 1.95 m2
Inner Backboard Rectangle: 18”x 24” | 46 x 61 cm
Material (Backboard): Plexiglas, tempered glass
Material (Rim): High tensile carbon steel (5/8” diam.)

Birthday:

Properties

Drawings include:
Basketball Hoop & Backboard side elevation, side (players)

Related Collections

Related Tags

Share

Text by

Bryan Maddock

Updated on

April 8, 2020

2D Downloads

For 2D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

3D Downloads

For 3D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

Upgrade to Dimensions Pro

Ad Blocker

Enjoy free drawings? We do too! 
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!

BasketballSports

Browse the Entire CollectionBrowse

Basketball is a team sport in which two teams of five players score points by shooting (throwing) a ball through an elevated hoop located on either side of the rectangular court. To advance the ball down the court, players must bounce the ball (dribble) or pass it to a teammate.

Sort by

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

6'9" | 2.06 m

—

—

—

—

—

—

December 30, 1984

—

LeBron James

206.000

1984.00

1810000

6'7" | 2.01 m

—

—

—

—

—

—

June 29, 1991

—

Kawhi Leonard

201.000

1991.00

1400000

6’10” | 2.08 m

—

—

—

—

—

—

September 29, 1988

—

Kevin Durant

208. 000

1988.00

1100000

6’6" | 1.98 m

—

—

—

—

—

—

July 6, 2000

—

Zion Williamson

198.000

2000.00

848000

6’10” | 2.08 m

—

—

—

—

—

—

March 11, 1993

—

Anthony Davis

208.000

1993.00

578000

6’6" | 1.98 m

—

—

—

—

—

—

February 17, 1963

—

Michael Jordan

198.000

1963.00

499000

6’3" | 1.91 m

—

—

—

—

—

—

November 12, 1988

—

Russell Westbrook

191.000

1988.00

496000

6’8” | 2.03 m

—

—

—

—

—

—

May 29, 1984

—

Carmelo Anthony

203.000

1984.00

489000

6'7" | 2.01 m

—

—

—

—

—

—

February 28, 1999

—

Luka Dončić

201.000

1999.00

478000

6’11" | 2. 11 m

—

—

—

—

—

—

December 6, 1994

—

Giannis Antetokounmpo

211.000

1994.00

472000

5’9” | 1.75 m

—

—

—

—

—

—

February 7, 1989

—

Isaiah Thomas

175.000

1989.00

471000

6’3" | 1.91 m

—

—

—

—

—

—

March 14, 1988

—

Steph Curry

191.000

1988.00

431000

6’5” | 1.96 m

—

—

—

—

—

—

August 26, 1989

—

James Harden

196.000

1989.00

419000

6’6” | 1.98 m

—

—

—

—

—

—

August 23, 1978

—

Kobe Bryant

198.000

1978.00

393000

7’1” | 2.16 m

—

—

—

—

—

—

March 6, 1972

—

Shaquille O’Neal

216.000

1972.00

327000

6'7" | 2.01 m

—

—

—

—

—

—

September 14, 1989

—

Jimmy Butler

201. 000

1989.00

307000

6’4” | 1.93 m

—

—

—

—

—

—

January 17, 1982

—

Dwyane Wade

193.000

1982.00

294000

6’1" | 1.85 m

—

—

—

—

—

—

May 6, 1985

—

Chris Paul

185.000

1985.00

287000

7’0” | 2.13 m

—

—

—

—

—

—

March 16, 1994

—

Joel Embiid

213.000

1994.00

207000

6’2” | 1.88 m

—

—

—

—

—

—

July 15, 1990

—

Damian Lillard

188.000

1990.00

206000

6'9" | 2.06 m

—

—

—

—

—

—

August 14, 1959

—

Magic Johnson

206.000

1959.00

203000

6’6" | 1.98 m

—

—

—

—

—

—

February 20, 1963

—

Charles Barkley

198.000

1963.00

176000

6’8” | 2.03 m

—

—

—

—

—

—

March 3, 1998

—

Jayson Tatum

203. 000

1998.00

160000

7’1" | 2.16 m

—

—

—

—

—

—

August 21, 1936

—

Wilt Chamberlain

216.000

1936.00

145000

6'9" | 2.06 m

—

—

—

—

—

—

December 7, 1956

—

Larry Bird

206.000

1956.00

144000

7’2” | 2.18 m

—

—

—

—

—

—

April 16, 1947

—

Kareem Abdul-Jabbar

218.000

1947.00

139000

7’0” | 2.13 m

—

—

—

—

—

—

February 19, 1995

—

Nikola Jokić

213.000

1995.00

135000

6’0” | 1.83 m

—

—

—

—

—

—

June 7, 1975

—

Allen Iverson

183.000

1975.00

129000

7’6” | 2.29 m

—

—

—

—

—

—

September 12, 1980

—

Yao Ming

229.000

1980.00

107000

7’0” | 2. 13 m

—

—

—

—

—

—

June 19, 1978

—

Dirk Nowitzki

213.000

1978.00

83000

6'9" | 2.06 m

—

—

—

—

—

—

February 12, 1934

—

Bill Russell

206.000

1934.00

82000

6’11" | 2.11 m

—

—

—

—

—

—

April 25, 1976

—

Tim Duncan

211.000

1976.00

82000

6’3" | 1.91 m

—

—

—

—

—

—

February 7, 1974

—

Steve Nash

191.000

1974.00

76000

7’0” | 2.13 m

—

—

—

—

—

—

August 5, 1962

—

Patrick Ewing

213.000

1962.00

67000

6’11" | 2.11 m

—

—

—

—

—

—

May 19, 1976

—

Kevin Garnett

211.000

1976.00

61000

—

—

—

—

—

—

—

Backboards

9. 43”-9.51” | 24-24.2 cm

—

—

—

—

—

—

—

Basketball

24.200

https://p3d.in/e/cHJyj

—

—

—

—

—

—

—

Rims & Nets

—

—

—

—

—

—

—

Basketball Court

—

—

—

—

—

—

—

Hoop & Backboard

More Sports

Sports

View the CategoryCategory

Sizes of basketball backboards - Article

The official basketball rules set out the dimensions of basketball backboards, according to which the dimensions of this sports equipment are selected. You can find these rules in official documents on the website owned by of the Russian Basketball Federation . At the moment, GOSTs relating to basketball equipment are under development and have not yet entered into force. In the specified documentation, one size option for the basketball backboard is set - 1. 8x1.05 m .

According to the existing classification of domestic manufacturers, boards with such dimensions are considered to be play boards. Designs with smaller dimensions are classified as training. A common option for training shields is the size 1.2x0.8 and 1.2x0.9 m . Such shields were popular back in Soviet times. Often such dimensions appear in the documentation for the construction of sports halls for basketball. They are compact, for which they are widely in demand in private practice, when arranging a training ground on a private territory or in a country house.

Basketball rules require the dimensions of the inner rectangle to be 59x45 cm . In backboards with dimensions of 1.2x0.8 and 1.2x0.9 m, there will be enough space around such an inner rectangle for a comfortable game. Shields of a standard size of 1.8x1.05 m in a small area will look too massive.

One of the outdated versions of the basketball backboard is a design measuring 180x120 cm, in which the size of the playing area under the hoop is increased. Such backboards look very cumbersome and are in demand in a situation where basketball backboards are being replaced in the hall without changing the size of the trusses for fastening. Dimensions such as 180x120 cm are mentioned in GOST. American manufacturers make basketball equipment, indicating the dimensions of the backboard in inches.

An inch system of measurement familiar to American manufacturers, used when marking basketball equipment. Basketball players who are accustomed to the metric system are not always able to navigate and translate the length and height in inches into meters.

The width of the shield is its horizontal dimension, and the height is its vertical dimension. With inch marking for shields, only the width of the structure is indicated. In this case, the height parameter can be any. For example, boards with dimensions of 120x80 cm and 120x90 cm will correspond to inch size 48.

The table shows the conversion of sizes in inches to sizes in centimeters. According to the data indicated in it, when calculating centimeter parameters, 1 inch is 2.54 cm. The table below shows approximate dimensions in cm, since a step of 1 inch does not make it possible to perform an accurate translation. For example, 30 inches is 76.2 cm, but some manufacturers make boards in this size with a width of 75 cm.

It is customary for Russian manufacturers of basketball equipment to adhere to the standards of 120x80 and 120x90 cm for basketball training backboards, which corresponds to a size of 48 inches for American manufacturers. The standard for a Russian-made game board is 180x105 cm or 72 inches.

Articles

Download price list

Reviews

General Director

Our company expresses its gratitude to ZSM GROS LLC for the prompt and high-quality work on the manufacture of two-way bike racks and street benches with backs.

Thank you letter
Read all reviews

Get answers to your sports equipment questions

During business hours, the manager will call you back within an hour

By sending a message, you consent to the processing of personal data

Do-it-yourself basketball backboard with height adjustment (20 photos). Basketball backboard dimensions and markings

Today we will talk about how to make a high-quality basketball backboard and basketball net with your own hands at home from improvised materials. We will also consider the technology of manufacturing a basketball backboard and a net for playing basketball for children or adults.

In order to make a simple DIY basketball hoop for kids, we will need thick wire and rope. Instead of thick wire, you can take an old unused hula hoop, cut it, shorten it and reconnect it. It is important to leave a "sprout" for attaching the ring to the shield.

If you want to make a basketball hoop with your own hands from thick wire, then in order to get the most even circle, we recommend using a cylindrical fixture designed to serve as a template. We wind the wire around it. And do not forget to leave a "sprout" for attaching the resulting ring to the basketball backboard.

The diameter of the metal blank for the hoop should be slightly larger than the diameter of the basketball. Then you should take the prepared rope and cut it into 20-22 identical segments. At the same time, the length of each should be 2.5 - 3 times greater than the planned length of the mesh hanging.

These pieces are attached to the metal ring at regular intervals. You need to tie the ropes exactly in the middle so that 2 ends of equal length remain free. Then we connect in turn 2 ends of nearby ropes around the entire circumference of the ring. This is the first level of our grid. Then, similarly, we tie the ropes to the next level, etc.
If you want to make a basketball hoop for your home, you can tie the bottom of the net so that the ball will stay inside when it hits. This will help reduce the chance of an accidental bounce of the sports equipment after hitting the basket.

DIY basketball backboard for adults. How to make a professional basketball backboard - here you have to try. How to make a basketball backboard at home. The process of making a basketball backboard is no more difficult than making sports predictions, especially if the necessary materials are available.

Here is a typical instruction for making a basketball backboard at home. For the base of the basketball backboard, you can choose a sheet of plywood, which is inexpensive and not hard to get either. A sturdy rectangular piece of plexiglass or thick plastic may also work well.

If the basketball backboard will be installed outdoors, then it is worth choosing the material for its base based on considerations not only of strength, but also of resistance to adverse weather conditions.

The next step is to choose a place where the basketball backboard will be attached. When choosing such a place, the main thing to remember is that the lower edge of the shield should be at a height of 290 centimeters from the ground, and the ring should be located at a height of 305 centimeters.

Now you need to mark and cut out the dimensions of the plywood blank. The ideal size of a standard basketball backboard are the following parameters: width - 1.8 meters, height - 1.05 meters. This size will allow players to make more accurate and varied throws.

Before you start cutting the workpiece, you need to use a pencil to outline the dimensions and draw lines along which the workpiece will be cut. It is better to cut it with a jigsaw, when working with which you must be careful.

After the blank of the future basketball backboard is ready, it will be necessary to draw a white square on it, which plays a very important role.

The white square is a kind of guide for the players when shooting, with the help of such markings it is much easier to get the ball into the basket. If the ball is correctly thrown into the corner of this square, then it will definitely reach the goal.

In order to mark out such a square, not only a brush and paint are needed, but also knowledge of the dimensions of the rectangle. Its external dimensions are 59 centimeters horizontally and 45 centimeters vertically.

When marking out, it should also be taken into account that the upper edge of the base of this rectangle must coincide with the level of the upper plane of the ring. The width of the stripes of the square should be 5 centimeters.

Basketball hoops

Material - solid steel, inner diameter 45 cm and painted orange.
The metal bar of the ring must have a minimum diameter of 16 mm and a maximum diameter of 20 mm. On the bottom of the ring there must be devices for attaching nets, such as to prevent injury to the fingers. The mesh must be attached to the ring at twelve equally spaced points along the entire perimeter of the ring. Net attachment devices must not have sharp edges or crevices that could get caught by the player's fingers.

The ring is attached to the structure supporting the basket so that no force applied to the ring is transmitted directly to the backboard. Therefore, there should be no direct contact between the ring and the device that secures the ring to the shield and the shield. However, the gap must be small enough that fingers cannot get into it.
The top edge of each ring must be placed horizontally at a height of 3.05 m above the ground at an equal distance from the vertical edges of the backboard.
The closest point on the inside of the ring should be 15 cm from the face of the shield. You can use rings with a shock absorber.

Made of white cord and designed to hold the ball momentarily as it passes through the basket. The net length must be at least 40 cm and not more than 45 cm.

Each net must have 12 loops to attach to the ring.
The top sections of the net must be sufficiently rigid to prevent:
The net will wrap around the ring and become tangled.
Ball stuck in the net or thrown out of the net by the net. Basketball net can be woven from braid, twine, rope, thick threads. The braid or thread is first cut into segments.

The length of each segment must be four times the length of the grid. The number of segments is determined as follows: the ring intended for the grid is measured, and the resulting value is divided by four. The do-it-yourself basketball backboard is almost ready. Now it needs to be firmly fixed. To do this, you will need 4 large bolts that can withstand a load of 30 kg, and drill four holes in the wall or any other place where the basketball backboard will be mounted.

Use a spirit level to drill holes evenly. After that, you can start installing the shield. It is very inconvenient to do it yourself, so you should again resort to the help of friends who can insure you on the stairs, as well as file and hold the shield.

Once the bolts are installed and screwed into place, the basket can be hung up so that you can finally play on the court with a new basketball backboard that will last for many years.

In short, you can make a good basketball backboard with your own hands. But it is important to pay attention to one serious point.

The fact is that no matter how it seems to us from the side that the contact of the ball and the basket hoop is quite soft, it should be noted that the impact load on the fastening of the hoop to the backboard is very high. The weight of the ball (if you do not go into the definition of physical values) during contact with the ring increases many times, even when thrown from an average distance.

Well, with an inaccurate hit from a long distance, this blow can reach destructive power. And such a load acts on the mount hundreds and thousands of times. So that your work does not go to waste, that is, the future ring with a shield is a reliable design, you need to pay maximum attention to attaching the ring to the shield and then the same shield to the wall or other structure. Regarding the material of the shield, it can be put together from the same inexpensive pine boards available, and preferably from harder wood. Proposals to make a basketball backboard from plywood, fiberboard, plastic do not stand up to criticism. The first two positions do not pass due to the fact that if your shield hangs in the season in the rain and the sun, nothing will remain of it.

Plastic will naturally withstand all of these weather conditions, but is unlikely to be affordable. Plastic plastic is different, because the one that is used in the gym is very expensive, another different lottery ... will stand it - will not stand it. But a wooden board, it is a material that has stood the test of time and history. It is known that the official dimensions of the basketball backboard are as follows - a width of 1 meter 80 centimeters and a height of 1 meter 5 centimeters.

But in principle, you can try to build a flat square of boards 3 cm thick and 80 cm X 80 cm in size, I think this area will be enough to play normally or work out the throw. Basically, only a square is actively used when throwing (its dimensions are 59centimeters, height 45 centimeters) above the hoop, since this is the small square you need to be able to hit if you want to perform a throw from the shield.

Then (if it hits this square), the ball will most likely fall into the ring. Even in this case, if you perform a throw with a rebound from the shield, the load on the shield itself will be very small, but on the fastening of the shield and the ring, in this case, the pressure will be maximum.

The basketball hoop is made from a metal rod with a diameter of 16 - 20 millimeters. I think everyone understands that in order to protect against atmospheric precipitation, the entire structure should be painted with the appropriate paint, which can be bought at the store, explaining to the seller why the paint is needed.

As a result, I will repeat myself and say that when trying to make a basketball backboard on your own, pay attention to the fastening of the ring to the backboard. This is the most fragile place in this design.

In this article you will learn:

• What are the dimensions of the backboard with hoop
• How to make a basketball hoop with your own hands
• Where to buy a ready-made basketball backboard with a ring

Basketball-like games were found among the ancient Scandinavian peoples and Mexican Indians. Today in northern Mexico, one of these games is popular - "Pok-Ta-Pok". It is believed that it appeared due to religious rites, which eventually turned into sports fun and an attraction for tourists. How the game "basketball" appeared, and what is a basketball backboard with a ring as a necessary element of this popular game, we will learn in this article.

When basketball and the first backboard with a hoop appeared

The forerunner of basketball is the 19th-century children's game "duck on the rock", familiar to the inventor of basketball, Canadian James Naismith. The principle of the game was to hit a small stone on top of a large one.

The concept of basketball was finally formed when D. Naismith moved to the USA and became a physical education teacher at the Youth Christian Organization College (YMCA) in Springfield, Massachusetts. Already teaching physical education and as a college professor, he faced the challenge of creating a winter game between baseball and football. Naismith, given the weather conditions this time of year in Massachusetts, decided that this game should be played indoors.

Naismith's goal was to create an outdoor game for the students of the Christian Workers' School that required more than strength and dexterity. It was supposed to develop coordination of movements in teenagers and at the same time be interesting.

So, in the winter of 1891, under the leadership of Naismith, the first basketball baskets were installed in the college gym. Baskets from under the fruit, fixed on both sides of the hall on the balconies, which encircled the room around the perimeter, acted as basketball hoops. Such baskets were fastened at a height of 3.05 m, it was this indicator that became the international standard, which is observed to this day.

The task of the players was to throw the ball (at that time they used football) into the basket. The first basketball match was held in the same hall on December 21, 1891. According to the conditions of the game proposed by Naismith, each team had 9 people, which exactly coincided with the number of students in the group.

The news of the new game quickly spread throughout America, and Naismith was asked to send the rules. On February 12, 1892, after learning the rules and mastering the basics of technology, the students of Springfield College played the first "official" match in the history of basketball, which ended in a 2-2 draw.

This meeting turned out to be so successful, and the rumor about a new type of competition spread so quickly that soon two Springfield teams began to hold demonstration competitions, which were already attended by hundreds of spectators. The initiative was picked up by students from other educational institutions, and the following year, the Northeast of America was swept by a real basketball fever.

The rules of basketball that Naismith wrote himself as a college teacher at 1891 year, was a list of 13 points, which eventually formed the basis of modern international rules, which hardly fit on 200 pages. In 1893, instead of baskets, they put iron rings with a grid, two years later they added shields, and two years later the team was reduced to 5 people.

What is a basketball backboard with a ring today? The shield is made of a transparent material, usually a single piece of tempered impact-resistant glass with a degree of hardness corresponding to that of a 30 mm thick hardwood shield. It is allowed to produce such shields from other materials, but in this case they must be painted white and comply with other requirements for such sports equipment.

The front side of the shield is made smooth, a marking line is applied along the edges, a rectangle measuring 45 cm vertically and 59 cm horizontally is indicated at the place where the ring is attached. Moreover, the upper edge of the base of the rectangle must coincide with the level of the upper plane of the ring. White outlines are applied to transparent shields, and black is used in other cases. The width of the lines is 5 cm.

The basketball backboard with hoop is installed at right angles on both sides of the playing court, parallel to the front lines. The center of the front surface of each shield lies on perpendicular lines reconstructed from points located on the site at a distance of 120 cm from the middle of the inner edge of each front line.

Shields are upholstered, the following requirements apply to it:

• the sides of the boards and the bottom end are covered with soft material at a height of at least 35 cm from the bottom corners;
• the lower end is upholstered with material at least 5 cm thick;
• the rear and front surfaces of the shield should be decorated with upholstery material, the thickness of which is at least 2 cm, at a height of at least 2 cm from the bottom end.

The following requirements are imposed on the structures on which the shields are attached: their front parts, including the upholstery, are placed at a distance of at least two meters from the outer edge of the front line. They are painted in bright colors that contrast with the walls of the sports hall in order to provide sufficient visibility to the players of both teams.

The structure on which the backboard with the hoop is mounted is fixed to the floor of the court in such a way as to prevent it from moving during the game.

Structures used for fastening shields must be upholstered with soft material behind the shield at a distance of 120 cm from the front surface of the shield. The minimum thickness of the upholstery is 5 cm, and the density is the same as that of the upholstery of the shields.

The base of the structure from the side of the playground is upholstered with dense soft material to a height of at least 215 cm, the thickness of the upholstery is 10 cm.

The minimum value of the so-called "indentation factor" of the upholstery of panels and structures is 50%. This figure means that when an appropriate force is applied to the upholstery, its indentation should be within 50% of its original thickness. The upholstery material provides protection to players from possible injuries during the game.

Basketball backboard and hoop dimensions

It's hard to imagine a basketball court without a basketball backboard and hoop. For them, world standards established by the International Basketball Federation have been adopted.

A basketball backboard is a rectangular or square panel to which a hoop is attached. Mounting is provided on the shield for mounting on a pole or hanging on a wall: rigid mounting is required, the product should not stagger and move.

Shield dimensions - 1.8x1.05 meters, with an installation height of 2.9 meters. By NBA standards, the size of the backboard must be 72x42 inches. Two shields are installed opposite each other from different ends of the field, the material is impact-resistant (as an option, tempered glass, acrylic, wood). Lines are drawn on a smooth surface. Models of basketball backboards with a net that are not intended for stationary installation are equipped with the same mounting elements as in the brackets for hanging punching bags. This method makes basketball backboards able to withstand a lot of weight and securely fixes them.

Ring or basket includes a metal (steel) circle covered with netting without a bottom. It is installed at a height of 3.05 meters from the floor and indented 15 cm from the lower edge of the shield. The inner diameter is selected from the range of 45–45.7 cm. The basketball hoop is painted in a bright color, usually orange. It is impossible to allow the transfer of load from the basket to the shield, therefore, the installation of the product is carried out with special attention.

DIY basketball hoop

Homemade basketball hoops are installed in summer cottages or hung in the yard near the house. In the summer, you can throw the ball with pleasure, feeling like Michael Jordan for a moment. This game is available to everyone: both children and adults. The benefits of such a seemingly simple exercise are incredible!

Have you set out to make your own basketball hoop and don't know where to start? Further, we will talk about this.

To make your own basketball hoop, you need thick wire and rope. Instead of a wire, an old unnecessary sports hoop is suitable, which is cut, shortened and connected again. Do not forget to leave a "sprout" for attaching to the shield.

Making a thick wire basketball hoop requires some trickery. To obtain an even circle, a cylindrical fixture can be used as a template on which the wire is wound. But, before cutting off the wire, do not forget about the "sprout" for attaching to the wall.

The diameter of the metal blank for the hoop is slightly larger than the diameter of a basketball. Next, the pre-prepared rope is cut into 20–22 identical segments. The length of each is 2.5–3 times the planned length of the net hanging.

These segments are attached to the metal ring at regular intervals. The ropes are tied in the middle, and the two ends of equal length are left free. Then the two ends of the nearby ropes are tied in turn, and so on along the entire circumference of the ring. It turns out the first level of the grid. The ropes of the next level are tied in the same way, and so on.

When making a basketball hoop for the home, the bottom of the net can be tied, which will allow the ball that hits the net to stay inside. Thus, the ball does not accidentally bounce to the side.

Now we know how to make our own basketball hoop. But it is necessary to answer the question, which is better - a home-made or a quality product bought in a store?

Making your own parts is fun. To do this, you only need free time, the necessary materials and a third-class welder. If you do not have this, then it is better to purchase a basketball hoop with a backboard from trusted manufacturers.

In order to make a basketball backboard with fastening, you will need six meters of a 2x2 cm profile pipe, 8.5 m of a 2x4 cm profile pipe, a backboard made of laminated moisture-resistant plywood, a basketball hoop, six anchor bolts for attaching to the wall. The design is assembled from three parts for easy wall mounting.

The required part is cut off from the shield.

Metal structures are welded and the prepared ABC is applied to them.

The shield is drawn, pasted over with adhesive tape, and lines 5 cm wide are drawn on it.

Attach the shield to the frame.

Where to buy a basketball hoop with a backboard

In such an active game as basketball every little thing is important! Even at the finish line, troubles happen: the ball is in the ring, but gets tangled in the net and gets stuck. This moment is ruined! How to avoid such troubles?

The following requirements apply to the ring net:

• 12 fastening loops;
• length should be 40–45 cm;
• use rigid white cord as material;
The
• upper is made in such a way that the net is not thrown onto the ring, the ball is tangled or stuck.

How to choose the right basketball net? The main thing to pay attention to is the material, diameter and thickness of the thread, type.

1. Capron and nylon products are used more often. The latter is more wear-resistant, so for professional training, boron falls on this material.
2. The diameter is selected according to the diameter of the ring and the ball.
3. For professional basketball nets, thick threads of increased strength are used, but for amateurs, more fragile ones can be used.
4. Type: knotted and knotless. Products of the first type are widely used, but knotless basketball nets for the hoop look better and absorb the impact of the ball well, and are more reliable.

Looking for quality hoop backboards? We will help you make the right choice. Sportstyle started its activity in 1992 and has been successfully presenting its goods and services in the markets of Russia and neighboring countries for more than 20 years.

One of the main activities of the company is the production of sports equipment. Our products are very popular and in demand, among them:

• boxes, rings, bags and pears;
• wrestling mats;
• equipment for sports aerobics and much more.

The range of our company is not limited to sports equipment. We are happy to produce for you tents for summer cafes and weddings, awning garages, trade tents, awnings for cars and boats, as well as pool bowls.

Our son became interested in basketball in the summer, and although there is a beautiful stadium with a basketball court half a kilometer from home, sometimes you want to knock the ball near the house. Therefore, it was decided to make a do-it-yourself basketball backboard near the fence (so that you could knock on a relatively hard road surface, and the ball would fly away, if it didn’t hit the ring, to our site, and not to someone else’s.
We deviated a little from the standard and the dimensions we got are like this (photo is clickable)

The shield was cut out of OSB (just in case, two layers were twisted, and one more, a small square, was added to strengthen the fastening - this can be seen in the photo below) and carefully painted with oil paint

The support was made of metal profiles 50*50 and 56*56 in size.
The fact is that that part of the fence, at which the shield is attached, is supposed to be removable for us - it is there that we usually dump soil, crushed stone and other minerals. Therefore, it was decided to make the shield removable. Along with support. We implemented this idea like this.

A short post driven into a pre-dug hole and cemented. The long one is fixed in it with screws. If necessary, it can be taken out. Actually, this is also visible in the diagram above.

Just before the shield was built, we had a welding machine, and this product turned out to be a great workout. The pipes were welded with the letter G, a beautiful rectangle was welded to a short crossbar, on which a shield was attached.

Mesh rings are sold for little money in all sports shops and in many hyper stores.
It turned out very nice.

Oh sport, you are the world!

There is nothing to do in the country, only bending metal, fumbling shish kebab, drinking beer.
It is necessary to go in for sports both by ourselves and by children.

True, for this you will first have to "bend the metal" and celebrate this matter with beer and barbecue.

Basketball backboard in the next series of the "Made of Metal" project.
Joint work of me and my father.

Batko studied the standards for the height and dimensions of a basketball backboard, made a wooden backboard, painted it, made wing screws, installed a pole. Well, in addition, he made critical remarks to the metal part.

I - designed the whole metal part and welded the metal.

Let's go!

01. First I sit down at the computer and sketch out the drawing of the shield and the pole itself.

The original plan was to put the ring in another place and pull it with a solid hitch to the nearest tree. But there turned out to be a lot of roots and they decided to put them in free flight and without a screed, which is why the ring in the upper part of the column remained rudimentary only in the drawing. Diagonals that are not in the drawing (green) have also been cancelled. We decided that the rigidity of the wooden shield and metal fasteners would be enough not to "walk".

Also on the move I changed the method of strengthening the outrigger knee. Not with a corner as in the drawing, but with two stripes on the sides, see the photo below.

A 5 cm profile was used for the pole, a 6 cm profile was used for the bracket strung on the pole. A strip is welded inside to prevent play.
Everything that adjoins the wooden shield is a 25 mm corner.

Important: the ring must be universal for both adults and children of different heights. Therefore, a height offset system was made.

02. The main large elements are welded: a pole, a knee, two stepson solid fuel boosters. The upper edge of the pillar and stepchildren is bevelled: for rainfall and for beauty.

03. More different types

04.

05. There is a strip welded inside the elbow pipe. At the top of the hole.

06. Welded shield fixing system. No, this is not a bottle of Zhatetsky Gus beer, this is gasoline.

07. Stepsons welded on. There was an error in the calculations. It was assumed that the stepchildren would strengthen the pillar from swinging, but they were attached lower than necessary. Further in the photo you will see that they protrude quite a bit from the ground. It would be possible to raise 30-40 cm higher. And now, nevertheless, the pillar sways during the game.

08. The heels are welded to the part that goes underground.

09.

10. Everything is painted

11.

12. Yamka

13. It will stand so for a couple of days and you can continue part of the column under painted, because there was no putty for metal, to putty the seams. The putty was bought in addition, puttied and repainted a little later.

14. Up!

15. Shield assembly.

16. Done!

17. The ring is now at its lowest point. Even lower than calculated, because one hole is not used (see the vacant thumb screw). Altitude change occurs with the help of one man-power on a stepladder.

18.

19. The village basketball open championship has begun!

When you passed a basketball court, did you have to restrain yourself from throwing the ball into the basket? Why hold back? Team sports reliably unite people of any age, religion and social status. And in order to look decent at any moment and on any site, it is enough just not to start training.

Small places for playing streetball can be equipped on sports grounds near the house, and rings can be built at summer cottages for children to play from improvised means. So, how to make a basketball hoop yourself?

Dimensions and materials required

1. The inner diameter of the basketball hoop is 45 cm;
2. the height of its upper edge above the playground is 3. 05 m;
3. ring material - metal bar, plastic pipe, improvised materials;
4. diameter of a bar or pipe for a ring - 16-20 mm;
5. distance from the ring to the shield - 15 cm;
6. mesh length - 40-45 cm;
7. mesh material - metal chain, synthetic cord, rope, braid.

Types of basketball hoops

Hoops can be different:

• metal with anti-vandal nets made of metal chain;
• metal with rope mesh;
• plastic with nets of various types of materials;
• creative (from the remains of construction, from old furniture, from large plastic containers).

The construction of a metal bar ring begins with marking. Since the basket must have an internal diameter of 45 cm, a rod or pipe is selected based on this.

Material length is calculated using the formula:

Bar length = Circumference diameter x 3.14 (pi value). We have 45 × 3.14 = 141.3 cm.

Since we need to fasten the ring to the shield, take the length of the rod about 150 cm.

Learn more

• 
  How to avoid fouls in basketball
• 
  How many national championships does michigan have in basketball
• 
  How to get grip back on basketball shoes
• 
  How to draw a basketball court with chalk
• 
  How to watch michigan state basketball
• 
  How much do basketball courts cost
• 
  How many foul shots in basketball
• 
  How to remember basketball plays
• 
  Duke basketball how to watch
• 
  How to break the press in basketball
• 
  How far back is the free throw line in basketball