How to paint basketball court lines on asphalt

How to Paint a Basketball Court

Most hoop lovers are content with a full court to play in, but most will agree that it’s a different feeling when you play in a good-looking court. Not only will it prolong your sneakers’ life span, paint and design on a basketball can inspire spirit and pride. What’s more, it also boosts teams’ morale, and for designs inherent to a community, it does give your place an identity. This article will provide you with tips and tricks on how to paint a basketball court and more.

Both indoor and outdoor basketball courts are subject to a lot of wear and tear. So at some point, you will have to replace or redesign how the floor looks. For wooden floors or wood tiles used in outdoor gyms, you won’t need to replace them as often. The same cannot be said, though, about outdoor courts.

Outdoor basketball courts are subjected to heat, rain, snow, and everything in between. In extreme conditions, paint should be reapplied every couple of months or so. Most experts recommend acrylic paint to finish an outdoor basketball court. What are some of the reasons acrylic is the best type of paint to use for basketball courts?

Perhaps the most important reason is that acrylic is made with specially-graded silica sand that prevents slippage. A slippery basketball court because of poor choices in the type of paint can be perilous and may cause injuries. Applying acrylic paint court surfaces make them aesthetically very pleasing while being easy to construct and maintain. Additionally, acrylic paint is resistant to common chemicals.

For other materials to paint a basketball court, you will need rollers (4 inches and 9 inches), pads, and trays. You may also need assorted art brushes, paint can opener, latex gloves, paint cups, duct tape, painter’s tape, and caution tape. During the project, you may need a water hose, pencil or chalk, and measuring tape.

As pointed out earlier, the most recommended type of paint for outdoor basketball courts is acrylic. Acrylic has some properties that make it best for traction while adding to the basketball floor’s aesthetic value. What’s more, acrylic is essentially fade-resistant, easy to repair, waterproof, and highly durable.

Now, there are other kinds of paint that you may use on a basketball court. Some may suggest rubberized paint for concrete basketball courts or perhaps epoxy paint. Generally, both rubberized and epoxy paint are considerably more expensive than acrylic paint, so the latter is more popular as paint used in a basketball court.

Marking and painting the three-point line is one of the more difficult paint jobs you can do on the basketball court. The three-point line is long and shaped like an arc, so it’s easy to mess up if you don’t know how to go about with it.

The first thing that you need to do is look up the dimensions of the three-point line. It would be up to you to adopt the regulation distance of the three-point line, whether the high-school, college, or pro dimensions.  

After determining the dimensions, the next thing you need to do is to create a makeshift compass. One method of doing it, and perhaps the easiest, is grabbing a string. One end should be at the bottom of the basket and have someone hold the other end with chalk. Drag the chalk with the string across to mark the three-point line. You can paint the line with acrylic paint by merely following the chalk lines.

In the NBA, the three-point line does not have the same distance all around. If you want to simulate an NBA three-point line’s appearance, it will be a little bit more complicated than just tracing an arc from one corner to the other.

If we are talking about outdoor basketball courts, two surfaces are preferred– concrete and asphalt. Other options for the base material for an outdoor basketball court are crushed stone and modular bases. With that being said, most outdoor basketball courts are either concrete and asphalt.

Honestly, it would boil down to personal preference in choosing between the two. In most cases, concrete is the better choice if you consider the cost of maintenance and repair. When done right, a concrete base material for a basketball court is basically maintenance-free. On the other hand, asphalt will deteriorate over time considering the freeze/that cycles, but unlike concrete, it is less likely to sustain cracks.

Now, how do you decide whether to go for concrete or asphalt? It depends on several factors. Relatively, both concrete and asphalt are incredibly strong surfaces, with the former potentially lasting 40 years with proper care and the latter for around 15-20 years. Other factors that contribute to the durability are proper application, thickness, and supporting materials.

As for appearance and functionality, asphalt provides an even surface than concrete. It would also be easier for the joints since it is not as hard as concrete. On the other hand, concrete is essentially non-slip. As we have pointed out, deciding which one is better comes down to personal preference.

As it stands, whether you choose to have a concrete or asphalt base material or surface, both will require upkeep to lengthen its service years. Resurfacing the material at least once a year may help prevent holes and cracks from developing, thereby lessening the risk for injuries. Sealcoating will also help the weather or rough play from ruining the surface, and applying sealant provide moisture resistance, reducing the need for repairs in the long run.

Here is a rundown of the differences between a concrete and an asphalt surface basketball court:

• Asphalt is the cheaper option than concrete.
• Concrete is more challenging to install than asphalt. 
• Asphalt does not last as long as concrete, more so if it’s not correctly built and installed.
• An asphalt surface is more even and softer than concrete, which makes it easier for the joints.
• Post-tension concrete basketball courts are a type of concrete that adjusts to tension to prevent cracks. While that is way more expensive, it may be one of the smartest choices as an outdoor basketball court surface.

Additionally, there is a considerable difference in using premium acrylic paint and its standard counterparts. The standard acrylic paint typically has a 1-year warranty while the premium has up to five years. However, the most significant difference is that the premium acrylic paint has a life expectancy of up to 30 years compared to the standard’s five years.

Like any construction project, the cost of painting a basketball court depends on several factors. Naturally, the bigger the court is, the more expensive the project. How much does it cost to paint a basketball court? A generous estimate, which means at the low end of the spectrum, may cost around $16,000, including the installation of the hoop.

However, not many of us can afford to hire a contractor to do the work. That is why when you consider how much it costs to paint a basketball court, it would be better off to do it yourself than hire someone to do it for you.  

If you or the community already have a basketball court in place, you will save a lot of money doing the project yourselves. At most, you will only need to buy $100 worth of top-notch acrylic paint, or even as low as $50 for acrylic paints with lesser quality. There will be other expenses thrown here or there (like tapes and markers), but that still dwarfs the cost of hiring a contractor to do the job.

1. To ensure that the entire project goes smoothly, pay attention to smaller details such as the materials and how you want the court to look. Sort the materials, piling them by how similar the items are. If you can, make a diagram to follow the pattern that you’d like as to the appearance of the basketball court.

2. Before applying the primer, make sure you wash the whole basketball court clean with a power washer and a broom. If you don’t have access to a power washer, a hose with a powered nozzle will do. Broom the court afterward to make sure it is clean and let the surface dry completely. Drying time may vary depending on the temperature and humidity. This is not the time to be impatient.

3. After the area dries completely, apply a clear primer to the surface. Use rollers to do this.

4. If you want to take it to the next level and paint some center court logo design, we recommend making a stencil out of poster board. Trace the outline over the poster board and cut out certain sections. Another method uses the grid system where you use the grid or squares as a guide for sketching the image. This is not for everyone, but if you have an artist in your midst, it’s worth a try.

5. Paint the lane in a different color than the lines to add that authentic look and feel. And remember, basketball lines are approximately two inches wide, so don’t vary the sideline, baseline, and centerline width.

Basketball courts, whether indoor or outdoor, need retouching and a repaint every once in a while. For outdoor basketball courts, repainting may come more often than the elections since these courts are subject to harsh weather.

The most recommended type of paint for outdoor basketball courts is acrylic. Acrylic paint is made with specially-graded silica that essentially makes it slippage-free. It is also excellent to look at and is available in dozens of colors. Moreover, acrylic paint is resistant to common chemicals.

Acrylic paint is available in standard and premium variants. Standard acrylic paints cost less, but the premium alternative may be the smarter choice in the long run. It has a more extended warranty (five years compared to one) and typically outlasts its standard counterpart in terms of life expectancy (30 yrs to five yrs).

Now, when you’re given a choice between asphalt and concrete as base material or surface in an outdoor basketball court, which should you choose? Most experts would recommend concrete and rightly so. 

Concrete is generally more durable and virtually a non-slip surface. Asphalt has a more bouncy feel and typically costs less to install. However, concrete trumps asphalt when it comes to years of service because some well-built concrete surfaces may last as long as 30 years. Post-tension concrete is an even better, albeit expensive choice. This type of concrete surface “adjusts” to any tension to prevent cracks. It is definitely a smart choice, considering the amount of money you would save in the long haul.

Well, if you had no idea how to paint a basketball court, we hope that this article pointed you in the right direction. Sometimes, these kinds of projects are not to be taken too seriously. If done with friends and the people in your community that care and love basketball, it is definitely an excellent way to build camaraderie while having fun doing manual work.

If you found this post helpful, you’re definitely going to like our other basketball FAQ articles here.

More interesting basketball FAQ posts here:

> How Many Laps Around a Basketball Court is a Mile?

> How Many Yards is a Basketball Court?

> How to Install a Ground Basketball Hoop?

> How Many Square Feet is a Basketball Court?

What to know about Outdoor Basketball Court Painting

A basketball court has to be lined properly in order to ensure the game is played properly. Any issue with the lining of the court could cause problems during play.  Basically, accuracy is everything and the paint needs to be easily seen on the surface.

When dealing with outdoor courts, there are normally two surfaces that are worked with. They are the asphalt basketball court and the concrete basketball court. Both surfaces require specific processes when preparing them and actually resurfacing and painting them so that they are once again safe and usable.

Court Resurfacing

Sometimes basketball court resurfacing is needed before any painting takes place. Older courts most likely have cracks and chips in them. The surface could also be crumbling in some places, which can present a hazard. Sometimes what is needed are repairs and other times the entire surface may need to be replaced with asphalt or concrete. Whatever the need, it can be done. Nonetheless, you can count on basketball court resurfacing taking place before the surface is ever replaced. This is a good way to make the surface pay for itself again and again throughout the years – you get the most life out of it as possible.

Asphalt Basketball Court Painting

Once an existing asphalt paid is repaired and sealed, the necessary wait time has to occur before it is painted. If a new asphalt pad had to be laid, it takes approximately two to four weeks for the asphalt to cure. Basically, you are waiting on the asphalt to completely harden and for the oils to come out of it. If a sports court painting company tried to do asphalt basketball court painting before this period is up, then the paint may not take well due to the oils coming out of the surface.

An acrylic resurfacing paint can then be applied by hand with a rubber squeegee so that the pores in the asphalt are smoothed out. This is what gives the court the smooth finish like a tennis court in many cases. If the court is a traditional asphalt court, then two coats of the resurfacing paint will be needed to give it a smoother feel.

Once the resurfacing coat is down, color can be applied. Two coats tend to do the job. After this coat is dried, then the lines can be applied with a professional taping machine.

Concrete Basketball Court Painting

Just like asphalt, a concrete pad may already exist or a new one needs to be laid. If a new one has to be laid, then it takes two to four weeks for the concrete to cure. When a new one is constructed, it is important for a brush finish to be used. This is very important because the court’s surface has to have texture so the paint has something to hold on to. If it is a smooth finish, then the paint could peel or chip.

Nonetheless, the first step before concrete basketball court painting is to clean the surface so that alkaline can be removed from the surface. An adhesion promoter may also be added so that the first coat of paint is able to adhere properly. One to two coats of an acrylic resurfacing paint is then applied by hand with a rubber squeegee. Not as much paint is needed on a concrete court as an asphalt court because concrete is not nearly as porous. But even with less paint needing to be used, four coats of paint should be applied.

After this, the color can be applied. Once this phase is complete, the lines can be applied using the professional tapping machine.

You Have a Choice

When you engage a sports court painting company to redo your outdoor basketball court, there are many options that are made available to you. Those options include different colors to choose from, as well as certain designs that can be applied. If the court is an outdoor court belonging to an organization, you can have the organization colors applied along with any logos. It is best to consult with the company to see what your options are and combine your ideas with their creativity to have a basketball court that looks fantastic.

If you have an outdoor basketball court needing painted, Brite Line Paint Co. can help you. Call us at 508-678-6775 or fill out our contact form.

Basketball court surface | Markup | All works on a turnkey basis

In order to play basketball in the fresh air in a quality and safe way, it is necessary to have a sports surface. The coating will provide grip to the athlete's shoes to prevent slipping and an optimal level of ball rebound. For playing outdoors, a seamless rubber crumb coating is most often used.

The basketball court, according to the rules of the International Basketball Federation (FIBA) , must be rectangular in shape and have a size of - 28 by 15 meters.
At the basketball court, according to the rules of the National Basketball Association (NBA) , the dimensions of the field for professional competitions are slightly different - 28.7 by 15.24 meters.

The dimensions of the basketball court for amateur basketball can be completely different:
For schools and universities : 21-28 m long, 12-15 m wide ) - 17 by 12 meters

Cost of mounting and laying rubber flooring for basketball and streetball courts in Moscow and Moscow region

Thickness and type of flooring (mm)*	Price ₽/m37
MosEpdm-Sport — Single layer seamless black rubber crumb coating from 10 to 40 mm	from 1 100
MosEpdm-Sport - One-layer colored coating of black rubber crumb with coloring pigment from 10 to 40	from 1 150
MosEpdm-Sport - Two-layer coating (sandwich) of black rubber crumb and full color EPDM with increased color brightness with wear resistance from 20 mm to 40 mm	from 3 200
MosEpdm-Sport - Single layer rubber coating of full color EPDM chips with increased color brightness and wear resistance from 10 mm to 40	from 2 400
*The price is indicated in rubles for the installation of flooring 1m2, including the necessary consumables. The minimum volume for the installation of flooring is from 100 m2 with a thickness of 10 mm.

The basic requirements established for the coverage of the basketball court:

- high wear resistance;

- the coating must be even;

- safety in case of a player's fall;

- resistance to temperature changes;

- the material must be environmentally friendly and not contain toxic substances harmful to human health;

- the coating should be optimally soft and elastic;

- the surface should look aesthetically pleasing and not dazzle the player.

Basketball court basic types:

1. Seamless rubber floor. The flooring is made from crumb rubber. The only disadvantage of such a coating is the rubbing of paint in those places where the game is played most intensively. Therefore, it is better to choose dark tones.
2. Double coat. The coating is created from two layers: the first layer is a substrate of sbr chips, which is laid on the base; the second layer is polyurethane and EPDM chips. The disadvantage of this coating is the high cost and dubious quality of the EPDM chips.
3. In rare cases, crumb rubber TPV, which has a high elasticity index, can be used to create a children's basketball court. Here, the priority is the safety of children, not the level of rebound of the ball.

Advantages of seamless rubber flooring for basketball or streetball courts:

- Low cost compared to other types of flooring;

- absorbs moisture well and there will be no puddles after rain;

- lack of seams and joints, which ensures the safety of the coating;

- high depreciation rate, which allows you to soften a blow or fall;

- the possibility of repairing individual sections at any time, if necessary;

- withstands temperature differences from -40 to +70 degrees;

- long service life;

- easy maintenance of the coating, you just need to wash it with water or a cleaning agent;

- decent quality;

- the coating material is safe for human health and the environment and has all the necessary quality certificates;

- does not sag from significant loads.

Stages of laying a seamless rubber coating for a basketball court:

1. The territory is being marked.
2. Substrate preparation. The base for laying a basketball court cover can be concrete or asphalt, under which a cushion of crushed stone, gravel or sand is created.
3. Priming of the base. Polyurethane is used with or without filler. The soil is the connecting link between the coating and the base, and also levels the surface and makes it more durable.
4. Apply a mixture of crumb rubber and polyurethane adhesive and use a special paving roller.

It is important to observe conditions of low air humidity, as at high humidity marriage may form.

Rubber flooring for a basketball or streetball court has long been used in many European countries and, recently, has begun to gain popularity in Russia. We offer you rubber flooring at a low cost, which you can choose according to the color and technical characteristics, based on your wishes. If you have any questions, our experts are ready to answer any of them.

In addition to laying rubber flooring for basketball or streetball , you can always order the service for applying sports markings for basketball or streetball court in compliance with all norms and standards. Marking is carried out on modern equipment using high-quality materials. As a result, you will get a neat and wear-resistant marking with a long service life! Details of the marking service can be found in the price list or on the link with a detailed description.

LEARN MORE

SPORTS CLUSTER WPK 65x38 - Workout City

1. Zone Basketball court. The size of the court is 532m2.
2. Zone. Zone 2. Table tennis. The size of the site is 114 m2.
3. Panna football area. The area is 116 m2.
4. Workout Zone; OFP and functional crossfit. The size of the site is 210.3 m2.
5. Warm-up and stretching area. The size of the site is 50 m2.
6. VFSK zone. The size of the site is 30.7 m2.

Installation options: soil, concrete, asphalt, safety pavement.

Zone 1. Basketball court.

Site size: 28x19 m (532m2)

Capacity: 12 people

Basketball court complete set:

• Safety rubber coating 10 mm, marking according to the scheme.
• Basketball stand - 2 pcs. Basketball stand completed:

  Anti-vandal game basketball backboard 1800x1050mm is made of laminated plywood 12 mm thick on a metal frame (frame profile 40x40mm). Mounting under the ring 100x110mm. The marking color is red (on request - blue, black). The volume of the backboard is 0.1 m3, the weight is 33 kg. It is recommended to purchase a basketball truss or stand, as well as a basketball hoop and net for the basketball backboard.

• fence, 3D ;4 mm3.6 m height, gate

Zone 2.

Site size: 12x9.5 m (114m2)

Minimum site size: for 1 table - 8x4.5 m

Capacity: from 6 to 12 people

Complete set of table tennis zone

• Safety rubber coating 10 mm, marking according to the diagram.
• Anti-vandal table for playing tennis-3pcs.
• Grid with table racks -3 pcs

Zone 3. Panna football.

Site size: 116m2

Minimum site size: 30 m2

Capacity: 4 people

Site requirements: soil, concrete, asphalt, safety surface

Site equipment:

• Pan football equipment ø 6m; height 1950 mm-1pc.

Zone 4. Workout, GPT and Functional CrossFit.

Site size: 210.3 m2

Number of concurrent students: 35 people

Site requirements: soil, concrete, asphalt, safety coating with crumb rubber 10 mm

Description: Workout zone, where you can perform many different street workout and general physical exercises. All workout equipment in this area is multifunctional and suitable for the development of most muscle groups. The height of the horizontal bars can be adjusted and fixed at the required level. Horizontal bars can be used both for pull-ups and for fastening accessories: loops, rings, ropes, shock absorbers, etc.

Complete set Workout area:

• W-037 Multifunctional workout complex workoutcity multifit Dimensions LxWxH (mm): 5290mm × 4280mm × 3155mm (max) -1pc
W-9009 4520x1800x2700 -1pc
• W-018 press bench 1500x750x500 -2 pcs
• W-015 Oval cross bars 3400x3400x1300-1 pc.
• Amwrestling table 1200x800x1300-1 pc.
• Double boxing stand - 1 pc.

Employment functional crossfit:

• Functional frame for crossfit with a rope and rings-4450x1900x3600-1pcs
• Squat with a weight of 1200x1000x2400-1 pcs
• Jumpbox, size (DHSHHHV): 600x5 pcs

5.

Learn more

• 
  How to bet in basketball
• 
  How old is coach k duke basketball
• 
  How many players are on a basketball team including substitutes
• 
  How to make better decisions in basketball
• 
  How to do good in a basketball game
• 
  How are basketball games divided
• 
  How many periods in basketball games
• 
  How to draw a basketball shoe
• 
  How many feet high is a basketball hoop
• 
  How many calories burned during basketball
• 
  How to improve your basketball game