Home »
Misc »
How to lace a basketball net
How to lace a basketball net
How to Put on Basketball Net (8-Step Guide with Pictures)
Is it time to replace the net on your basketball hoop? If you have a basic nylon net and you’re one of those sharp shooters who get nothing-but-net, you may find that your net wears out quickly. Even if you have a tougher rope type net, like you see in the NBA or NCAA, eventually it is going to wear out, especially if you have an outdoor hoop.
Even if it is not worn out, it may start to get dirty and dingy looking, or you may just want to change your aesthetic by getting a net that is a different color, design or type.
Quick Navigation
Why Do I Need a Basketball Net?
Some may think that a net is a trivial part of a basketball hoop, but it is, in fact, a very important part of the game and your hoop. Have you ever tried playing without one? If you haven’t, give it a try and you will see the difference immediately.
The ball is slowed down as it goes through the net. Photo by Melissa Medina.![]()
See the net slows the ball down after it goes through the hoop. An important effect that allows us to see that a basket has definitely been made. Without it, it can sometimes be very hard to see if the ball actually went through. The speed of the ball can sometimes trick the eye, and if the ball does not contact the rim it can make it really hard to tell.
My Personal Experience
I’ve had to play quite a few times without a net. Whether it was at a public court, where the net was just gone, or at my own court where it wore out during a game and we didn’t want to stop to go to the store to get a new one.
In any case, it’s just not the same, playing without a net. Shooting those long 3 pointers and not hearing the swish sound, can be very disappointing. The net really does give that extra feeling when you make a shot. Without a net, there is just something missing.
Very Important!
Replacing a basketball net will most likely involve you getting up on a ladder.
Please be cautious and make sure your ladder is on stable ground and that you do not stand on the top step or rung of the ladder. If possible, get a helper to hold the ladder steady for you.
Don’t have a ladder at home? You can get one from Amazon.
Resources You’ll Need
- A new basketball net (like this or this).
- A step ladder.
- A helper.
- A pair of scissors (like this).
How to Put on a Basketball Net: A Step-by-Step Guide
The following are general instructions for putting on a basketball net. These instructions are for a standard regulation basketball net and rim.
Step 1: Set up your ladder.
If you have an adjustable hoop, it might be best to lower it as low as you can. Once you lower it, make sure that it is secured. If it goes low enough, you may not need a ladder, but it can still make the job much easier. Set up your ladder up so that it is centered under the front of the rim.
Center the ladder under the hoop.
Step 2: Remove the old net.
If the old net is still on the rim, you will need to remove it first. Carefully climb the ladder and have your helper hand the scissors to you once you are stable and in a comfortable place. Carefully cut each loop near the rim and pull the remaining parts of the net out of the hooks on the rim.
Cut the net.
Step 3: Figure out which side of the net to attach to the rim.
Have your helper hand the net to you, so you can start attaching it to the rim. If you can’t tell which side of the net to attach. Look at the net. The end with the longer loops, will be the end that you attach to the rim.
Long loops on net.
Step 4: Push the net loop through the rim hook.
Grab one of the long net loops and hold it between your index finger and thumb. Squeeze it so that you can push it through the rim hook from the inside of the rim to the outside of the rim.
Push the net loop through the rim hook.
Step 5: Attach the net loop to the rim hook
Open up the net loop enough that you can loop it around the front of the rim hook. Hold it in place with one hand and with your other hand, firmly pull the net loop from the inside of the rim, so that the loop tightens firmly in the rim hook.
Attach the net loop to the rim hook.
Step 6: Hook the remaining net loops to the remaining rim hooks.
Repeat steps 4 and 5 for the remaining net loops and rim hooks. There are 12 hooks on a standard rim, so you should have 11 more to go. Make sure that you don’t skip any loops or hooks. Also, make sure that you keep the net loops straight and do not get them entangled with the other loops. If so, you may need to remove the entangled loops and re-attach them.
Step 7: Pull the net tight.
Grab the bottom of the net and firmly pull it downward to ensure all the loops are attached and to stretch and straighten the net out a little.
Pull the net tight.
Step 8: Play ball.
Start shooting some hoops and have fun playing basketball with your new net.
Final Words
Having a net on your basketball hoop is an important part of being able to enjoy the game. You can replace your net with a good heavy-duty net, or you can go with one that adds some color to your hoop.
Whatever you choose, replacing your net is fairly simple, so don’t hesitate to replace it whenever it starts to feel worn or you just want to give new life to your hoop.
How to Replace the Net on a Basketball Hoop
Written By: Kevin A Walker (and 6 other contributors)
- Favorites: 0
- Completions: 3
Difficulty
Very easy
Steps
5
Time Required
10 minutes
Sections
1
Flags
0
- BackSporting Goods
- Full Screen
- Options
- History
-
- Download PDF
- Edit
- Translate
-
- Embed This Guide
-
Introduction
If you have an old basketball net that needs replacing, check out this guide!
No tools specified.
-
Edit
-
-
Loop the first net loop through the basketball rim.
-
Push the net through each loop on the basketball rim.
-
Pull the net loop down and spread the rope across the rim coil as shown
-
Pull the net tightly to the rim.
Edit
-
-
Edit
-
Edit
-
Edit
Almost done!
Now that you've replaced your net, you're ready play some basketball.
Conclusion
Now that you've replaced your net, you're ready play some basketball.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 6 other contributors
Badges: 8
+5 more badges
Team
10 ways to lace up sneakers beautifully
Laces have a very specific practical function.
They keep our feet inside the shoe while walking and running. For this function to be performed, the simplest, most banal criss-cross lacing is enough. And this suits many.
If you want beauty and uniqueness, you need to explore more complex lacing options. There are a lot of them, but now we will talk about only five. Perhaps you will like one of them and immediately after reading the article you will go to “tuning” your sports shoes.
#1. Reverse chain This lacing option is perfect for bright sneakers with light laces. The color contrast will draw attention to the unusual pattern, and those who are close to you will definitely appreciate your efforts.
#2. Grid Not very comfortable, but beautiful pattern. It is difficult to tighten the laces with it, but many will like the look of your sneakers. If you want to please not only others, but also yourself, lace loose, voluminous sneakers in this way. And do not forget that you need at least 6 pairs of holes.
#3. Ladder United States soldiers have long appreciated this method of lacing. It will also suit you if you have high shoes and a love for military. Pair it with dark shoes and light laces for a masculine, solemn, and stylish look.
#4. Zipper A very secure way to keep your running shoes in place. Beautiful weaving tightens the laces so tightly that the shoes literally become an extension of your body. An exemplary combination of style and practical use.
#5. Hidden knot Lacing method for those who appreciate minimalism and simplicity. Looks equally good on both low and high sneakers. The main thing is that there should be an even number of holes.
#6. Knotted lacing Not the easiest way to thread laces into trainers or sneakers. Looks weird but beautiful. Suitable for you if you have a lot of time and patience - it is unlikely that you will be able to tighten such lacing in a couple of seconds.
#7. Sawtooth lacing With this lacing option, your shoes will be easy to put on and just as easy to take off. What you need if you are always in a hurry and in a hurry. It can also be advised to the military and athletes for whom convenience and speed are of great importance.
#8. Roman lacing It is immediately clear why it is called so. In the pattern, at a glance you will recognize the Roman numerals - ten and one. It is relatively easy to lace up shoes in this way, but it is much more difficult to tighten them.
#9. Double cross This is where the saying “the eyes are afraid, but the hands are doing” will be appropriate. This lacing can scare inexperienced fashionistas, but if you understand at least a little, it becomes clear that there is nothing complicated about it. And a pair of shoes with such lacing will appeal to you and your friends.
#10. European lacing Comfortable, fast and fairly simple lacing option.
It saves a lot of time, and also reliably tightens shoes. With it, your sneakers will fit snugly to the feet and will not leave you at the most crucial moment.
Share
slamdunk.shop
Great basketball player
The purpose and choice of basketball nets
Since 1936, basketball has become an Olympic sport. Invented by the American James Neisman at the end of the 19th century, the game has undergone many changes. This applies not only to the rules, but also to the equipment.
Confirmed historical fact: in the early days of basketball, simple wicker baskets were used instead of baskets to collect fruit. They were suspended from balconies at a level of about three meters above the ground. The people sitting on the balconies prevented the balls from flying into the baskets, so basketball backboards appeared to protect the projectile from the fans. It was inconvenient to get the ball out of the basket every time it hit, so the bottom of the fruit container disappeared.
After some time, the baskets were replaced with metal rings, leaving the historical name of the inventory. Basketball hoops were more durable and comfortable than wicker bowls. After a while, a net was hung on the ring.
Photo 1. Ball in the net
Requirements for nets
Basketball nets are subject to stringent requirements. When equipping a playground for professional games, the following standards are taken into account:
- 12 loops for fastening;
- 40-45 cm long;
- production material - white rigid cord;
- diameter is optimal so that the ball does not get stuck.
Net manufacturers know exactly what is bad if, when throwing the ball, the woven fabric gets tangled, thrown up, torn. To produce high-quality equipment, serious manufacturers of sports equipment strictly follow the regulations.
Why does a basketball hoop need a net?
It seems to ordinary people that the grid is an extra element of the structure.
Especially when you consider the fact that both balls and fingers of especially active players get stuck in it. Surprisingly, even professional basketball players do not always give the right answer to the question why the ring needs a net. These are the assumptions made by athletes and fans:
- for beauty;
- makes a pleasant rustle when the ball hits;
- helps you aim better;
- after hitting the ring, the ball falls exactly down thanks to the net, and there is no need to run after it;
- a relic, a tribute to tradition - the mesh is hooked to make the ring look more like a fruit basket, which was originally used for the game in the 19th century.
Photo 2. Chain net
All the answers are good, but the truth is: the net on the basketball hoop helps to fix the ball hitting the target. Her appearance reduced the number of controversial points. They are not in a hurry to get rid of the net even now, when the flight of the ball is monitored not only by players, referees and fans, but also by modern video surveillance.
