Home »
Misc »
How to make a paper basketball ball
How to make a paper basketball ball
How To Make A Paper Basketball? 13 Easy Steps To Make
Right now, Basketball is one of the most popular sports going around in the world. All you need are two things- a ball and a hoop to start with.
Kids love to play basketball. Because this is fun. This is exciting. There is never a dull moment in this game. Children love doing exercises, especially when it is hidden in a competitive and thrilling sport like basketball. Hence playing with the best portable basketball hoop shall create more enthusiasm.
They show tremendous hand eye co-ordination, fine motor skills, improved flexibility and endurance. As a young kid, whenever there is a scope to have the ball in their hand, they hardly let it go.
Table of Contents
- materials you’ll need to make a paper basketball
- 13 Step By Step Paper Basketball Making Process
- Pro Tips
But what if your mom says you can’t play with the ball inside the house? Because it can get really noisy out there.![]()
In addition to this, there is a greater possibility that you may break things or shatter your windows.
That is exactly the reason why most often parents don’t allow their children to play inside the house. Besides, not all the kids may have the capability to own a basketball.
So, what should they do now? Should they give up playing the game that they adore most?
No, they don’t need to. Instead, they can try to make something out of the local materials. In this situation, paper basketball is the way to go. With paper basketball in your hand, now you can easily play inside your house. But how to make a paper basketball?
To make various shapes, Paper is a sensational medium to have at your disposal. Can you tell me what is most amazing about things made of paper? Paper is really a low-cost material. It is extremely easy to manufacture.
These paper basketballs do begin with a simple circle. In fact, this is so simple to make that you can decorate and craft it all by yourself.
The overall process is easy to understand and absolutely safe for the children as well. Make it colorful according to your liking. Kids will have tons of fun with their friends.
So, why not try making a paper basketball to show the love and passion you have for the sport? Let me give you some instructions on how to make a paper basketball.
materials you’ll need to make a paper basketball
- Newspaper or paper (amount certainly depends on the size of the ball that you want for your kids)
- Any type of scotch tape
- Color paper (orange)
- Scissor
- Compass
- Pencil
- Ruler
- Ruler
- Black permanent marker
13 Step By Step Paper Basketball Making Process
Yeah, there are several ways by which you can make paper basketball.
But we always try to help our readers with the best information possible.
This is why we have enlisted the easiest way for you to make a paper basketball. With that now, you can easily make a paper basketball by purely following these instructions.
Step 1: Collect some old magazine or newspaper. Any type of discarded paper will also do.
Step 2: Now you take a sheet of paper on your hands and fold it to form a round shape as the basketball.
Step 3: Then crumple the paper into a circle and you need to create a basic paper ball shape.
Step 4: You should wrap the other paper onto your crumpled paper.
Step 5: Repeat the same process to another piece of paper. It will now get bigger and bigger.
Step 6: Continue crumpling until you think this size will be OK for you.
Step 7: Hold the grip tightly with your hands.
Step 8: Now, you need to work with your drawing compass. When you’re adjusting your compass keep in mind that the span between the tip and pencil is kept half as wide as you prefer your basketball to be.
After that you need to place the point of the compass at the center of your color paper. Keep holding it in place with the small shaft at the top of compass. Spin the compass carefully and use pencil to draw the perfect circle onto the paper.
Step 9: Utilize a scissor to cut the circle out from the paper.
Step 10: How do you draw a basketball? Now it is time to bring a real basketball image on the circle paper. Draw two lines on the circle paper. One vertical and other is horizontal. The vertical line should be going across the center of the orange circle, and the horizontal line must be across the center of the vertical line.
Make it look like a black plus sign by using a ruler and black permanent marker. You should also draw two semi circles at either side of the horizontal line.
Step 11: Nicely place the orange paper onto the crumbling ball now.
Step 12: Bring the tape and wrap it around your paper shaped ball.
Step 13: This is not any instruction really. Yeah, finally you’re ready to play!
Now you see, how simple it is to make a ball out of paper? Challenge your friends and see who can score more points. Surely your mom won’t be screaming at you now. Cheers!
Pro Tips
Tips 1. When you design the ball, it will be much easier to paint for you if you have a basketball or an image of basketball on your hand. Besides, you can also choose any other design over the ball.
Tips 2. If you want, you’re free to fill the whole paper shaped ball with the tape.
Related articles you may like:
Basketball Cup and Ball Craft ⋆ Exploring Domesticity
This basketball cup and ball craft is easy to make and fun to play! Perfect basketball birthday party activity, team parties, or just a fun craft for the kids while the grownups watch the game!
With very simple supplies, you can keep the kiddos busy making their own basketball cup and ball game. They are so cute and fun for kids!
We participate in affiliate programs, including the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. If you don’t have Prime, you can try it 30 days for free here!
Basketball is a big thing this time of year. Our family is not what you would call a sports family… At times, I feel like that puts our kiddos at a disadvantage. I love camaraderie and team spirit of sports, and the drive to improve and succeed at something.
I played softball as a kid (as well as being in gymnastics and horseback riding) and it was so much fun! Unfortunately, I married someone who is not interested in sports unless it also involves motors. So, our kids haven’t shown much interest. We’ve tried a soccer camper, baseball parent-child classes, gymnastics, dance, karate… You name it. They haven’t really found that thing that clicks.
So, this past weekend, we decided to watch a little basketball.
As this idea did not go over well with the whole family, we also added a fun basketball cup and ball craft. That was much more of a hit!
The game is your typical cup and ball game where you try to get the ball into the cup by swinging it on a string.
This craft is great for kids during the game, as a basketball birthday activity, or just something fun to do with friends. If you’re having friends over to watch the game and you want to keep the kids busy, this is perfect!
Also Read: Spy Party: Secret Agent Birthday Party They’ll Never Forget!
Basketball Cup and Ball Craft
Materials
- White plastic bath cups – We used these from Walmart
- Orange paint
- Silver Sharpie
- Orange ping pong balls
- Black Sharpie
- Something to pierce the holes in the cup – Awl, screwdriver, etc.
- Wood Chopsticks
- String – I think embroidery floss would work best
Instructions
- Paint an orange stripe around the rim of the white plastic cup.
- With the silver Sharpie, draw diagonal lines one direction all the way around the cup. Then draw them the other direction all the way around the cup.
- With the black Sharpie, draw basketball lines on the orange ping pong ball.
- Cut your wooden chopstick in half.
- Carefully, make a hole – slightly smaller than the chopstick – about 1/3 of the way up the side of the cup. Insert the chopstick into the hole.
- Cut a piece of string, roughly 12-18 inches long.
- Thread a needle with the string and push up thought the bottom of the cup. Tie off the end inside the cup.
- Insert the other end of the string completely through the ping pong ball and tie off at the end.
- Play with the basketball cup and ball craft by trying to swing the ball into the cup.
Some hints for the basketball cup and ball craft…
We learned some things while creating this project. So, I’ll share all the tips with you so things go a little smoother!
First, white cups and orange ping pong balls saves a lot of time and mess.
I looked high and low all over our house because I knew I had a mini cup and ping pong ball set from the Dollar Tree. After making a mess of the house, I found those only to have found the white plastic cups and realize they’re better because you don’t have to paint them. I also realized my husband has some old orange ping pong balls, which also doesn’t need painting.
Second, the plastic cups are very flimsy so you have to carefully cut the holes.
We had a tool my husband found that was tapered at the end and had a bit of a blade around it so I could carefully carve out a hole in the plastic. Does anyone know what the heck this is? Comment below if you do, because I’m clueless. I suggest using an awl if you have one or just carefully poke a hole with a screwdriver.
You want it to be a tight fit when you put the chopstick in. You can always give it a little hot glue if needed. We had the hot glue gun ready but found we didn’t need it.
Third, it’s easier than you think to make a basketball.
I was a little intimidated to make the basketball lines on the orange ping pong ball. However, I found that it’s easier than you think as long as you start with the two cross lines all the way around the ping pong ball. Start the first line right across the writing on the ball and go all the way around the equator of the ball. Then, turn the ball a quarter turn and go around the other way so they crossed twice at the center. From the midpoint where they intersect, draw two curves to the right at left and repeat on the other side. Once you have those curved lines, you can draw a slightly curved line the other way to complete them.
Fourth, use a string that is strong enough to be swung around, but thin enough to fit through a needle.
This was our biggest struggle! We couldn’t find our embroidery floss anywhere.
Instead I took some of this string, which was too big for our needle and separated the three colors. At that point it was still too big for our small needle, so I just taped it to the end tightly and it ended up making it through the cup and the ping pong ball. To save yourself a lot of trouble, it helps to use a small but strong string and a larger needle if you have one.
They were a hit!
I’m biased, but I think they turned out very cute! With all of our trial and error out of the way, they are also a very simple project for kids. I could see this basketball ball and cup craft being perfect for a basketball or sports birthday party, something fun for a basketball team get together, or just a fun activity for the kids.
Our kids had a lot of fun trying to get the basketball in the cup. They also randomly pick them up and give them a try days later. So, it s a great little activity and gives them some hand-eye-coordination practice. Win-win!
Also Read: Bunny Birthday Party
Pin It!
For more kids crafts and activities, follow us on Pinterest!
What sports or activities is your family into?
Basketball Cup and Ball Craft Supplies
How to make a paper ball?
Probably, there is not a single person in the world who did not have a ball in childhood.
There are a huge number of games based on the use of this sport attribute: basketball, baseball, volleyball, tennis and, of course, football. What do sports balls and origami have in common? It turns out that there is a special technique for making a sports ball out of paper. Of course, you won’t be able to play it, but an original gift is definitely guaranteed. Let's see how to make a paper ball?
What do you need?
Footballs are made from modules of various shapes. Their size and quantity will depend on what volume you need. The most popular balls are 8, 18 or 32 modules.
Consider the option of making a sports gift from 32 panels. You need to make blanks of 12 pentagonal modules and 20 hexagonal ones. The main thing is that all their sides are the same. In order to maintain the traditional colors of a soccer ball as a result, it is better to make pentagons from black paper, and hexagons from white. You can go the other way: stick colored self-adhesive paper on the pentagons.
How to make a paper ball using modules?
To begin with, all the pentagonal and hexagonal modules must be carefully folded into the stencil. To do this, we make a hexagonal module smaller than our blanks. In each of the 20 hexagons in the center we place our stencil and bend all the edges of the model inward, take out the base and again iron all the folds at an angle of 90 degrees. When creating pentagonal modules, we will use the same hexagonal template. To do this, all the edges of the model will also need to be bent inward, but we will apply the stencil from the outside so that all sides of all 32 modules are the same as a result. All edges are carefully ironed along the folds, turning at an angle of 90 degrees.
How to assemble a soccer ball?
The rules for assembling the ball are very simple. Each pentagon must be connected to five hexagons, with each hexagon bordering three hexagons, and the pentagon must not border any pentagon.
We start the assembly by attaching one pentagon to the hexagon, gluing the remaining hexagonal modules in turn around our base. Gradually, our workpiece begins to bend, taking the shape of a ball. Next add 5 pentagons and 5 hexagons. Thus, it turns out that half of the structure is assembled. To understand how to make a whole paper ball, you need to be very careful. Now we take 5 hexagons, and then 5 pentagons. Then it remains to glue the remaining hexagons, and at the end the last pentagon. Carefully insert the last module into the hole. We leave the ball to dry for a day. A beautiful and unusual gift is ready.
So, knowing how to make a paper ball, you can solve the problem of choosing a gift, for example, for a man on February 23rd. The original soccer ball will be an excellent interior decoration and will remind you of you.
Paper ball | Do it yourself
Despite the large number of modules, this voluminous ball is not difficult to assemble. The main thing is to be patient and do everything strictly according to the scheme.
Paper for crafts must be taken thick, then the ball will keep its shape well. To make this ball, you will need 5 square sheets of white paper and 2 square sheets of colored paper. A square can be made from landscape paper. For crafts, you will need 20 white modules and 12 modules of any other color. First prepare the white modules. Each module is an equilateral hexagon with three mounts. To make the hexagon blanks, take all the white squares and fold them in half. Cut along the fold. You will have 10 rectangles.
Take a rectangle.
Fold it in half lengthwise.
Expand. Bend the right side so that the bottom corner coincides with the central fold (where the mark is).
Bend the left side of the rectangle, making a corner at the bottom, aligning its lower part with the fold.
Turn the workpiece over to the other side.
Bend the left part of the craft to the right along the edge of the triangle (where the pointer is), which turned out on the workpiece.
That's it.
Unfold the leaflet. In the middle of it should be two triangles.
Cut along the folds. You will not need the edges of the sheet, and put the triangles aside. In the same way, cut out triangles from the remaining squares. You will get 20 triangles.
Take one triangle.
Fold it in half along the fold.
Fold the top moving part in half.
Turn the workpiece to the left by 90°. Fold the top corner along the dotted line.
Fold the top in half.
Turn the craft to the left again by 90° and fold down along the dotted line.
Fold the folded part in half.
There is a pocket in the middle of the piece. Hide the lid of the triangle inside.
Bend the corners of the triangle towards the center. These are module mounts.
Turn over the module. You have a hexagon.
Make the rest of the hex modules.
Take a square sheet of colored paper.
Fold in half.
Divide into three equal portions.
Cut. Do the same with the other square sheet. You will have 12 rectangles.
Take one rectangle.
Fold in half.
Turn so that the fold is on top. Fold the top piece in half along the dotted line.
Bend the protruding part of the sheet downwards so that both folds coincide.
Fold down the right side of the dotted line. Then both folds will be equal here.
Lower the upper single triangle (like a page) down.
On the left you will see the protruding lower part of the workpiece.
Fold it down, making sure the edges are even.
Turn the blank over to the other side so that there are two unconnected leaves on top. Bend the top leaf down, aligning the corners.
Turn 180°. Fold the top sheet in half.
Unfold and fold it again on the other side.
Unfold the folded piece of paper again and hide its upper edge in the pocket.
The edges of the folds are marked on the craft.
Connect the right corner of the rhombus to the left label. Iron the fold.
Unfold. Now connect the left corner of the rhombus with the right mark and iron the fold too.
You have such a figure with outlined lines. Now you have to hide the bottom corner inside the pocket. You will get a triangle.
Connect the right corner to the mark. Bend the left corner down to the fold.
Turn over to the other side. You should end up with a pentagon. Make the rest of the modules.
Start assembling like a mosaic by sticking the white module into the colored one. The color module, in this case blue, should be in the center.
Around the blue module should be placed 5 white, fastened together. Only the first and fifth modules will not be connected. They must be fastened with the blue module.
Place it so that the top of the pentagon faces the connector and its wings face the sides. This is a prerequisite, otherwise the assembly process will fail and you will not be able to assemble the ball.
