Home »
Misc »
How to make basketball court model
How to make basketball court model
How to Build a Model of a Mini-Basketball Court
••• basketball court image by Warren Millar from Fotolia.com
Updated April 25, 2017
By B.T. Alo
Building a mini-basketball court model is a great project for basketball enthusiasts and can be used as a decoration piece, as a mini game board or for a school project. If you plan to make a mini-basketball court for a school project, be sure to take lots of pictures during the construction to show your teacher—teachers love a well-documented project. Making the model is not hard, but children under age 10 may need a parent's help with cutting wire and other steps.
Cut your foam board to measure 28 inches by 15 inches--a scaled-down size of a regular mini-basketball court. Use the utility knife and ruler to cut the foam board in straight lines.
Paint the top of the foam board court black or dark gray; let dry. With the pencil and ruler, mark a line down the center of the court at 14 inches in from either end.![]()
Find the center of the length of the court (at 7 1/2 inches down) and make a small mark on each end of the court as well as on the line down the center of the court.
Set your compass to a radius of 1 3/4 inches and scribe a full circle around the center point of the court—this should be at the point marked on the center court line. Measure 5 inches in from the center mark on one end of the court and scribe another circle the same size. Measure 3 inches to each side of the center mark on the end, then rule a line between each point to the edge of the circle. Draw a line that joins these two lines and cuts the circle in half. Erase the inside part of the circle. Repeat on the other end of the court.
Paint all the pencil marks with white or yellow paint for the lines of the mini-basketball court. Let dry.
Cut two 7-inch pieces of wire and twist one end into a 1-inch diameter circle. Bend the circle so that it is at a right angle to the rest of the wire, which should be straight.
Cut out two 2-inch-by-2-inch rectangles of cardboard and paint it in whatever colors you want for the backboards.
Glue the backboards above the hoop of the wire with hot glue; let dry. Stick the two hoops into either end of the court, 1 inch in from the center point at the end. Secure with hot glue to finish your mini-basketball court model.
Things You'll Need
- Foam board
- Utility knife
- Ruler
- Paint
- Paintbrushes
- Pencil
- Eraser
- Compass
- Wire
- Wire cutters
- Cardboard
- Hot glue
Related Articles
About the Author
B.T. Alo is media director, chief writer and editor for a U.S.-based marketing and consulting firm. He holds a bachelor's degree in business and communications. Alo's interests include business, investments, electronics, personal finance, health, communication, popular trends and travel.
Photo Credits
basketball court image by Warren Millar from Fotolia.
com
How to create 3D basketball models
There are different sports arenas 3D models. The sports arena should have accurate dimensions that are close to the real ones. Let’s highlight the original dimensions that would be used for Basketball 3D Models at https://www.flatpyramid.com/basketball-3d-models/
The basketball court requires a lot of space, as the correct courts can be 94 feet long.
The size of the basketball courts in accordance with the rules of the NBA NCAA is 94 by 50 feet (28.6 by 15.24 m). The size of most school sites is 84 by 50 feet (25.6 by 15.24 m). In the case of a half-board, divide the length and width by 2.
Draw the main lines on the basketball 3D model set.
The side and front lines should have a thickness of 2 to 3 inches (5.08 to 7.62 cm) and surround the entire area. The central line runs horizontally from one side of the site to the other, strictly in its center. The free throw line is located just 15 feet (4.57 m) from the ring and has a length of 12 feet (3.
65 m). The size of the penalty area is 12 by 19 feet (3.65 by 5.79 meters) (the top of the rectangle is the penalty line).
Draw the rest of the lines. This three-point line, the central circle, and the area, now your basketball court 3D model has real dimensions.
On Flatpyramid you will find different basketball 3D models like the 3D model of the basketball court with additional details: benches, net fencing.
For a basketball court 3D model, we need a ball too. The ball should have a spherical shape and should be orange with a traditional pattern of eight inserts and black seams. The circumference of the ball should be – 749-780 mm. Smaller balls are also used. In men’s games, the ball has a “size 7,” in women’s teams – “size 6”, in mini-basketball games – “size 5”. Such balls are divided into two types: indoor use only and universal, that is, suitable for indoor and outdoor use.
A big plus will be if the basketball is close to real analogs and has the brand and coloring of the manufacturer.
The largest manufacturers of balls:
Spalding – the manufacturer of sports equipment from Springfield (Massachusetts). The founder of the company Albert Spalding made the first ball in honor of James Naismith at the turn of the XIX-XX centuries. Since then, Spalding has been producing basketballs and official balls for the National Basketball Association since 1983. Spalding is the first company to produce a basketball for official games. Spalding balls are popular among basketball 3D models.
Molten Corporation is a Japanese manufacturer of sports goods, one of the largest manufacturers of balls for basketball, volleyball and football, one of the five leaders in this field. Molten balls for over 20 years are the official, exclusive basketball balls of the Olympic Games. These balls are popular in the basketball 3D models category too.
Most of these models on Flatpyramid have high-quality, and details. They are made in real sizes, with the correct proportions. Has a correct grid and customized realistic V-ray materials.
The archive has all the necessary high-resolution textures.
Was this helpful or not? Let us know down below.
Editors’ Recommendations:
- Let’s talk about how to create watercraft 3D models
- These new 3D scanners should stop the TSA from ever having to touch your underwear again
- After a drawn out legal battle, you’ll soon be able to legally 3D print guns
Related Topicsbusiness
Chris has been blogging since the early days of the internet. He primarily focuses on topics related to tech, business, marketing, and pretty much anything else that revolves around tech. When he's not writing, you can find him noodling around on a guitar or cooking up a mean storm for friends and family.
Construction of a turnkey basketball court|SportObject
The SportObject company offers its services in the construction of turnkey basketball courts. Trusting the construction of our company, you get a whole range of turnkey services, including design, ground work, laying the base and coating, marking and other construction work.
We strictly adhere to the agreed deadlines and provide our clients with a work schedule that indicates the start and completion dates for construction.
Find out why it is safe to cooperate with us
Details
Calculation of the cost of the object
To find out the estimated cost of your object, select the options below or use the detailed calculator available by clicking the "Make a detailed calculation" button.
1. Coating:
Choose the type of coating for your object.
Not selectedAcrylicRubber crumbModular plasticPolyurethane
2. Destination:
Specify where your object will be used.
Not selectedFor suburban developmentsFor educational institutionsFor competitionsFor sports organizationsFor private business
3. Your object:
Specify whether your object is located: indoors, outdoors or it needs a hangar.
Not selectedOutdoor (outdoor)Indoor (indoor)To be built (prefabricated hangar)
4.
Field sizes:
Select the appropriate field size from the list provided.
Not selectedCustomStandard30x18 - (playing dimensions 28x15) 34x19 - for competitions (playing dimensions 28x15)
Specify the parameters of your object in a detailed calculator and get an approximate cost of the service.
Budget savings
We help reduce your costs by up to 40% and avoid unnecessary overpayments.
3 day project
We will design and calculate the exact cost of your object in just 3 days.
5 year warranty
We give great guarantees for imported goods and materials from our warehouse.
421 590* 421590 RUB
* The price is indicated for the basic package with a coating without a base. You can also use the detailed calculator.
Implementation example
Private sector basketball court
Difficulty:
Rubber slabs for outdoor sports grounds are perhaps the most reliable and rational option of all. The coating is made of high-strength crumb rubber and a binding polymer (polyurethane adhesive).
More
Get a consultation
Order a call back and one of our managers will advise you on all your questions
You can also call
8 (495) 240-82-24
By submitting your personal data through the forms on the site, you give your consent to the processing of personal data in accordance with Federal Law No.
152-FZ "On Personal Data" dated July 27, 2006, as amended on July 1, 2017.
Stages of construction on the example of a football stadium
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed). Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc.
We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base. When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds.
That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed).
Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc. We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base.
When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds. That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
Options
How do we work?0003
We carry out construction and installation works
We hand over the finished object and provide a guarantee
Private
I am a private client
We work in all regions of the Russian Federation
We cooperate with contractors who are ready to travel to any city in Russia.
We take measurements, bring materials or buy them in your city, install coatings and equipment.
We offer standard solutions
We are engaged in the construction of both standard and unique projects. We work individually with each client: we take into account your wishes, fit into the budget and comply with the agreed deadlines.
We take care of your budget
We help clients in the selection of materials, places for construction, provide detailed advice and suggest how to get a fully functional sports facility at a lower cost.
We create 3D visualization
We offer the development of a 3D model that will convey a complete vision of the concept of the future object. Also, this service will help both us and the client to eliminate the possibility of error at the design stage.
We make reconstruction and repair
We carry out all types of reconstruction works: we repair the foundation, lay the foundation, replace the coatings, install fences, roof structures, make glazing and ennoble the areas.
I am a frequent customer
Corporate
I am a corporate client
We offer additional services
We are engaged in maintenance of the facility after commissioning: we take care of the condition of sports surfaces, ennoble areas, do glazing and other general construction works.
We take on complex projects
We have enough experience and capabilities to solve the most non-standard and complex tasks. Many of our specialists took part in the preparation of sports grounds for the Olympic Games in Athens and the 2018 World Cup.
We cooperate with global companies
We maintain strong partnerships with well-known manufacturers from Europe and Asia. At the request of the customer, we supply the goods you like from abroad in the shortest possible time.
We provide detailed advice
We answer in detail all the client's questions about the project and our services. Also, we are ready to provide professional legal advice on construction issues.
We build turnkey facilities
We provide a whole range of services: designing an object, drawing up design estimates, building a foundation and base, selecting and laying coatings, erecting roofed structures, installing appropriate equipment and necessary communications.
Our clients
I am a corporate client
Acknowledgments and certificates of conformity
Company "SportObject" offers its services in the field of sports construction.
We are engaged in the construction of turnkey basketball courts: we design, draw up design estimates, coordinate the construction, mount the foundation and roof structures, lay bases and coverings, perform finishing work, provide communications and deliver sports equipment. Each of the stages of work is implemented strictly according to the schedule agreed with the client, which allows us to deliver a fully finished project on time.
We value the trust of each customer and guarantee comfortable cooperation
- We travel to any place in Russia;
- We provide detailed advice on construction issues;
- We select high-quality solutions for the client's budget;
- We help with the choice of an advantageous place for construction;
- We work with complex and non-standard ideas;
- We offer creative solutions within a reasonable budget;
- We provide additional facility maintenance in other regions of Russia.
We supply basketball surfaces from world manufacturers
The dynamics of basketball matches means high speed, sudden movements and heavy loads on the joints.
It is very important that the flooring of the basketball court is both wear-resistant and injury-proof at the same time. For basketball courts we offer: tennis, hard or soft-hard, modular plastic, polyurethane coating and crumb rubber coating.
Our company only works with proven materials that have passed the strictest quality control, so we offer a wide selection of outdoor basketball surfaces from domestic and foreign manufacturers, such as: ERFOLG , BERGO , Plastfacto , Conica , Novol , Aropa , CRUMB , GUMBIT 90 MASTER FIBER and many more.
In addition to the construction of basketball courts, we take care of the complete set of the object and provide it with all the necessary equipment until it is ready for operation. In accordance with the requirements of the customer, any sports equipment can be installed: backboards, rings, stands of a certain capacity, running tracks, a sector for standing long jumps and, of course, various types of fences.
We offer metal fences or safety nets at the customer's choice
- Metal 2D and 3D railings are sectional structures of increased strength with rod diameters from 4 to 6 mm, protected by a polymer and zinc coating. Unlike other fences, mesh panel fencing is maintenance-free - it does not collect dust, does not fade in the sun and does not deform under wind loads, and also does not need periodic painting
- Protective mesh made of kapron or nylon threads can have different mesh sizes: 100x100, 40x40 or 20x20. Such a fence is ideal for zoning the playing space and protecting spectators from sports equipment. The mesh does not need maintenance and is easily restored
While building new basketball courts, we also work on existing facilities that need major repairs or minor restoration. We are happy to undertake the design of a sports facility, without including construction work, and for the implementation of the facility according to an already finished project.
You can ask us a question, leaving your contact details. We will call you back shortly.
You can also call
8 (495) 240-82-24
How to equip a basketball court in the country or in the yard
Basketball develops the physical data of the child - coordination, endurance, educates strong-willed qualities, concentration, attentiveness and teaches non-standard thinking. Professionals recommend sending a child to the basketball section from the age of 8-9, but outside the city or in the yard, you can “chase the ball” from an early age.
I myself equipped a basketball court in my country house and now I am ready to share the secrets of its arrangement. I'll tell you what you need to do, how to choose the right equipment and how to care for it.
Prepare basketball court surface
To create a basketball court in accordance with all the rules, you need to select a flat horizontal surface for it and fill it with concrete.
After that, I recommend applying a special rubber coating, like on playgrounds in the yard. There is a more expensive coating option - from rubber.
The coating will provide cushioning - the ball will bounce well.
If it is not possible to organize a special platform, you can simply place a rack or hanging basket on a dirt surface. In this case, the ball bounce will not be so strong. An important requirement for safety: the surface must be flat, without holes and bumps.
The dimensions of the site depend on the features of your yard or plot in the country. A full-fledged basketball court has dimensions of 28 × 15 meters. However, not everyone has the opportunity to build such a site in the country.
It is necessary to take into account the technical features of the game. The three-point line in basketball is 6.75 meters from the hoop. Therefore, it is necessary that the size of the site be at least 10 × 13 meters. If you are not going to train three-point shots, a 5 × 5 meter court will do.
Mark
The second step is to mark up. It is important to use paints of contrasting colors. It is better to buy paints with a high content of rubber or polymer.
If you are equipping a basketball court for children, make the markings bright so that they cheer you up and attract attention. For the game of teenagers and adults, it is better to immediately apply technically correct markings.
Place a small fence or protective net on the site. Thanks to them, you do not have to constantly run after the ball to the other end of the site.
Buy stand or backboard
It is difficult to answer the question of what is better - a basketball stand or a backboard. It all depends on taste, tasks and opportunities. Each of these types of equipment has its pros and cons.
There are two types of racks: mobile and static. The static one is mounted in the ground.
The base of the mobile rack is filled with sand or water - for stability.
The main advantage of a mobile rack is that it can be moved from place to place. This is convenient when there is no dedicated basketball court or if you are going to play other games in this area, such as tennis or football.
The main requirement for racks is their stability. It will be much more comfortable and safer to play if you are sure that the stance will withstand a blow of any force.
Pay attention to the materials from which the racks are made. A static rack will be outdoors throughout the year, which means it must be made of reliable materials. It is better to buy racks from well-known manufacturers. So, the American companies Spalding or Royal Fitness guarantee high quality, durability and safety.
Basketball backboards can be made in the country with your own hands from a board, chipboard or plywood remnants. If this option does not suit you, you can purchase semi-professional or professional options in stores.
There are four types of materials from which the shield surface is made: composite, polycarbonate, acrylic and tempered glass.
The first one is the cheapest. It is intended for entry-level players. Now manufacturers offer a large selection of colors. A carbonate backboard will provide a good bounce of the ball. An acrylic shield is bought to hold competitions or intense games.
The mobile stand can be moved, so it is suitable for a playground in the country and for those who want to play other games besides basketball
Shields and racks made of tempered glass look solid. They will be appreciated by experienced basketball players
Pay attention to rings
You can buy cheap rings, but I don't recommend doing that. In a year they will deteriorate and you will have to buy new ones. Basketball hoops from Spalding and Royal Fitness are made from quality metal that won't rust in the rain.
The ring must have a springy structure - no rigid attachment to the shield.
According to NBA rules, the ring must be fixed at a distance of about three meters from the ground.
For a game with the participation of younger students, it can be hung lower so that it is not very easy to hit it, but at the same time it is quite possible.
Choose rings made from high quality metal to last for many years. For a game involving adults and teenagers, metal chain rings are suitable. They are distinguished by durability and strength.
Know what types of basketballs exist
Success in the game depends on the basketball.
They are divided by size. Size 7 is for men, 5 for women. Even smaller balls are bought for children. The size 6 ball is suitable for street ball or street basketball where the game is played on half the field.
You also need to take into account where you will play the ball: on the street or in the hall. The street ball has a stronger bounce, it is harder and more wear-resistant, but the indoor ball is more convenient to hold in your hands.
It is important to pay attention to the composition of the basketball.
Well-known companies use complex polymer compositions for its production. The more expensive the ball, the more complex the polymer composition. The quality of the material determines how comfortable it will be for the players to hold the ball, what kind of rebound it has from the floor and from the bow of the ring.
Another important nuance: do not forget to purchase a pump with any needle.
If you want the ball to have good grip and bounce well, you need to choose polymer models from world famous manufacturers
Proper care
Professional athletes are ready to play in any weather, but amateurs are better off not following their example. If you don't properly store, use and care for your basketball arsenal, its lifespan will be shortened. Humidity will ruin the ball and all equipment, so you can’t leave them outside during rain and snow.
Balls should be stored only in a dry and ventilated room at a temperature of 10 to 20 °C.
Before winter storage, water must be poured out of the base of the mobile rack, and then removed from the street. If you don't feel like doing this every time, fill the rack with sand. Then it will not need to be constantly moved. Basketball stands from Royal Fitness can be left outside in the winter.
Points to remember when setting up a basketball court
- The area needs to be determined. The classic version - 28 × 15 meters - is not suitable for everyone. For a dacha, a 5 × 5 meter area will be enough if you want to train three-point shots.
- Don't forget the markup. It should be in a contrasting color. Bright colors will interest children and cheer them up.
- It is necessary to install a protective net so as not to constantly run after the ball to the other end of the area.
- If the shield is stable, then it is safe. A mobile stand from a well-known manufacturer will also not let you down, and it can be moved around the site.
