Home »
Misc »
How to paint a basketball half court
How to paint a basketball half court
How to Paint a Basketball Court
Most hoop lovers are content with a full court to play in, but most will agree that it’s a different feeling when you play in a good-looking court. Not only will it prolong your sneakers’ life span, paint and design on a basketball can inspire spirit and pride. What’s more, it also boosts teams’ morale, and for designs inherent to a community, it does give your place an identity. This article will provide you with tips and tricks on how to paint a basketball court and more.
What Materials are Used to Paint a Basketball Court?Both indoor and outdoor basketball courts are subject to a lot of wear and tear. So at some point, you will have to replace or redesign how the floor looks. For wooden floors or wood tiles used in outdoor gyms, you won’t need to replace them as often. The same cannot be said, though, about outdoor courts.
Outdoor basketball courts are subjected to heat, rain, snow, and everything in between. In extreme conditions, paint should be reapplied every couple of months or so.![]()
Most experts recommend acrylic paint to finish an outdoor basketball court. What are some of the reasons acrylic is the best type of paint to use for basketball courts?
Perhaps the most important reason is that acrylic is made with specially-graded silica sand that prevents slippage. A slippery basketball court because of poor choices in the type of paint can be perilous and may cause injuries. Applying acrylic paint court surfaces make them aesthetically very pleasing while being easy to construct and maintain. Additionally, acrylic paint is resistant to common chemicals.
For other materials to paint a basketball court, you will need rollers (4 inches and 9 inches), pads, and trays. You may also need assorted art brushes, paint can opener, latex gloves, paint cups, duct tape, painter’s tape, and caution tape. During the project, you may need a water hose, pencil or chalk, and measuring tape.
What Kind of Paint Do You Use on a Basketball Court?As pointed out earlier, the most recommended type of paint for outdoor basketball courts is acrylic.
Acrylic has some properties that make it best for traction while adding to the basketball floor’s aesthetic value. What’s more, acrylic is essentially fade-resistant, easy to repair, waterproof, and highly durable.
Now, there are other kinds of paint that you may use on a basketball court. Some may suggest rubberized paint for concrete basketball courts or perhaps epoxy paint. Generally, both rubberized and epoxy paint are considerably more expensive than acrylic paint, so the latter is more popular as paint used in a basketball court.
How Do You Paint a Three-point Line on a Basketball Court?Marking and painting the three-point line is one of the more difficult paint jobs you can do on the basketball court. The three-point line is long and shaped like an arc, so it’s easy to mess up if you don’t know how to go about with it.
The first thing that you need to do is look up the dimensions of the three-point line. It would be up to you to adopt the regulation distance of the three-point line, whether the high-school, college, or pro dimensions.
After determining the dimensions, the next thing you need to do is to create a makeshift compass. One method of doing it, and perhaps the easiest, is grabbing a string. One end should be at the bottom of the basket and have someone hold the other end with chalk. Drag the chalk with the string across to mark the three-point line. You can paint the line with acrylic paint by merely following the chalk lines.
In the NBA, the three-point line does not have the same distance all around. If you want to simulate an NBA three-point line’s appearance, it will be a little bit more complicated than just tracing an arc from one corner to the other.
What is the Best Surface for Outdoor Basketball Court?If we are talking about outdoor basketball courts, two surfaces are preferred– concrete and asphalt. Other options for the base material for an outdoor basketball court are crushed stone and modular bases. With that being said, most outdoor basketball courts are either concrete and asphalt.
Honestly, it would boil down to personal preference in choosing between the two. In most cases, concrete is the better choice if you consider the cost of maintenance and repair. When done right, a concrete base material for a basketball court is basically maintenance-free. On the other hand, asphalt will deteriorate over time considering the freeze/that cycles, but unlike concrete, it is less likely to sustain cracks.
Now, how do you decide whether to go for concrete or asphalt? It depends on several factors. Relatively, both concrete and asphalt are incredibly strong surfaces, with the former potentially lasting 40 years with proper care and the latter for around 15-20 years. Other factors that contribute to the durability are proper application, thickness, and supporting materials.
As for appearance and functionality, asphalt provides an even surface than concrete. It would also be easier for the joints since it is not as hard as concrete. On the other hand, concrete is essentially non-slip.
As we have pointed out, deciding which one is better comes down to personal preference.
As it stands, whether you choose to have a concrete or asphalt base material or surface, both will require upkeep to lengthen its service years. Resurfacing the material at least once a year may help prevent holes and cracks from developing, thereby lessening the risk for injuries. Sealcoating will also help the weather or rough play from ruining the surface, and applying sealant provide moisture resistance, reducing the need for repairs in the long run.
Here is a rundown of the differences between a concrete and an asphalt surface basketball court:
- Asphalt is the cheaper option than concrete.
- Concrete is more challenging to install than asphalt.
- Asphalt does not last as long as concrete, more so if it’s not correctly built and installed.
- An asphalt surface is more even and softer than concrete, which makes it easier for the joints.
- Post-tension concrete basketball courts are a type of concrete that adjusts to tension to prevent cracks.
While that is way more expensive, it may be one of the smartest choices as an outdoor basketball court surface.
Additionally, there is a considerable difference in using premium acrylic paint and its standard counterparts. The standard acrylic paint typically has a 1-year warranty while the premium has up to five years. However, the most significant difference is that the premium acrylic paint has a life expectancy of up to 30 years compared to the standard’s five years.
What’s the Average Cost to Paint a Basketball Court?Like any construction project, the cost of painting a basketball court depends on several factors. Naturally, the bigger the court is, the more expensive the project. How much does it cost to paint a basketball court? A generous estimate, which means at the low end of the spectrum, may cost around $16,000, including the installation of the hoop.
However, not many of us can afford to hire a contractor to do the work. That is why when you consider how much it costs to paint a basketball court, it would be better off to do it yourself than hire someone to do it for you.
If you or the community already have a basketball court in place, you will save a lot of money doing the project yourselves. At most, you will only need to buy $100 worth of top-notch acrylic paint, or even as low as $50 for acrylic paints with lesser quality. There will be other expenses thrown here or there (like tapes and markers), but that still dwarfs the cost of hiring a contractor to do the job.
5 Tips on How to Paint a Basketball Court1. To ensure that the entire project goes smoothly, pay attention to smaller details such as the materials and how you want the court to look. Sort the materials, piling them by how similar the items are. If you can, make a diagram to follow the pattern that you’d like as to the appearance of the basketball court.
2. Before applying the primer, make sure you wash the whole basketball court clean with a power washer and a broom. If you don’t have access to a power washer, a hose with a powered nozzle will do. Broom the court afterward to make sure it is clean and let the surface dry completely.
Drying time may vary depending on the temperature and humidity. This is not the time to be impatient.
3. After the area dries completely, apply a clear primer to the surface. Use rollers to do this.
4. If you want to take it to the next level and paint some center court logo design, we recommend making a stencil out of poster board. Trace the outline over the poster board and cut out certain sections. Another method uses the grid system where you use the grid or squares as a guide for sketching the image. This is not for everyone, but if you have an artist in your midst, it’s worth a try.
5. Paint the lane in a different color than the lines to add that authentic look and feel. And remember, basketball lines are approximately two inches wide, so don’t vary the sideline, baseline, and centerline width.
Wrapping Things Up: How to Paint a Basketball CourtBasketball courts, whether indoor or outdoor, need retouching and a repaint every once in a while.
For outdoor basketball courts, repainting may come more often than the elections since these courts are subject to harsh weather.
The most recommended type of paint for outdoor basketball courts is acrylic. Acrylic paint is made with specially-graded silica that essentially makes it slippage-free. It is also excellent to look at and is available in dozens of colors. Moreover, acrylic paint is resistant to common chemicals.
Acrylic paint is available in standard and premium variants. Standard acrylic paints cost less, but the premium alternative may be the smarter choice in the long run. It has a more extended warranty (five years compared to one) and typically outlasts its standard counterpart in terms of life expectancy (30 yrs to five yrs).
Now, when you’re given a choice between asphalt and concrete as base material or surface in an outdoor basketball court, which should you choose? Most experts would recommend concrete and rightly so.
Concrete is generally more durable and virtually a non-slip surface.
Asphalt has a more bouncy feel and typically costs less to install. However, concrete trumps asphalt when it comes to years of service because some well-built concrete surfaces may last as long as 30 years. Post-tension concrete is an even better, albeit expensive choice. This type of concrete surface “adjusts” to any tension to prevent cracks. It is definitely a smart choice, considering the amount of money you would save in the long haul.
Well, if you had no idea how to paint a basketball court, we hope that this article pointed you in the right direction. Sometimes, these kinds of projects are not to be taken too seriously. If done with friends and the people in your community that care and love basketball, it is definitely an excellent way to build camaraderie while having fun doing manual work.
If you found this post helpful, you’re definitely going to like our other basketball FAQ articles here.
More interesting basketball FAQ posts here:
> How Many Laps Around a Basketball Court is a Mile?
> How Many Yards is a Basketball Court?
> How to Install a Ground Basketball Hoop?
> How Many Square Feet is a Basketball Court?
How To Paint A Basketball Court: Tips And Tools
Have you ever wanted to paint your basketball court? You might be asking yourself, “How hard could it be?” Well, don’t worry because we are here to help! Many steps go into painting a basketball court.
We will talk about paint and tools needed, the time required, and how much the project costs. So if you’re looking for some inspiration on how to paint your basketball court then this article is for you!
[powerkit_toc title=”Table of Contents” depth=”1″ min_count=”4″ min_characters=”1000″]
What Tools and Material Do I Need to Paint a Basketball Court?
Here is a list of paint and tools you will need to paint your basketball court. And how to use them:
- Paint for the Floor. We recommend a paint that is made specifically for floors.
- Brushes to apply paint on wall/floor itself. Can be either Purdy brand paint brushes or Graco paint sprayers. We recommend getting both but if budget is an issue then just get one! If using a paint sprayer make sure it can handle latex-based paints otherwise it won’t work well with water-based paints.
- Paint Trays to put paint in. Usually comes with a paintbrush and paint sprayer kit.
The paint trays can also be used as a place to mix the paint before applying it to your wall/flooring too! - Roller Frame (for a paint tray if painting flooring). If you don’t want to use paint trays then roller frames are your next best option. They can hold more paint than the average paint tray. So they will speed up sometimes when covering large surfaces like basketball courts.
- Tape or Blue masking tape (something that is easily removable because you will need to take it off from certain areas). There are other types of blue tape but make sure whatever type you get.i It’s high quality so peeling them off won’t damage your floor underneath. Also having a roll of this for between coats helps a lot during the painting process! The clear tape will work fine but we recommend getting blue painter’s tape. Because it’s easy to see when applying it on different surfaces which makes it a lot easier. Painters tape also works great for paint stenciling!
- Drop cloths.
We recommend getting drop cloths at least two times bigger than what you think you might need. Just in case paint splatters or you paint in more than one area! - Paint Scraper. This is to remove paint from the floor if it has chips/scratches. If the paint on your court doesn’t have any chips then this step can be skipped!
- Gloves (if painting walls). You don’t want paint all over your hands while trying to paint the wall, trust us!
- Sprayer Bottles for water base paints. These are great because they allow for a very smooth finish when spraying paint onto basketball courts and other surfaces that require fine detail work. We recommend getting these with adjustable nozzles so if you need finer spray control during application you will have it at your disposal! There are three main types of paint sprayers and they are HVLP paint sprayers, airless paint sprayers, and turbine paint sprayers.
- Masks/respirators for the paint fumes. These come in handy if you’re painting indoors or just working with lots of dust during your project.
We do not recommend doing this job without one unless you want to feel super sick after finishing your basketball court! Also, make sure that whatever kind of mask/respirator you get is approved by OSHA (The Occupational Safety and Health Administration). They should also be NIOSH certified as well. - Bucket for water. You will need this when cleaning paint trays and brushes plus it helps keep everything nice and clean during application.
- Paint thinner (used after painting has already dried on wall/flooring). Some paints like epoxy paint don’t come off easily without using something that breaks down their surface tension, which is what paint thinners do! We recommend getting one specifically designed for floor coatings too because they are made from different ingredients than regular paint thinners. Keep in mind that paint thinner is very flammable and should always be kept away from open flames, paint sprayers, paint trays/lids (if the paint in them has dried up), etc.
- Paint Trowel (for mixing paint on the ground). This can also be used to scrape excess paint off of walls if needed!
What Are the Lines & Areas in a Basketball Court?
- Boundary Lines – you should first start with the outline of the basketball court. The dimensions vary from one basketball court to another but you can find the average dimensions of a basketball court.
- Midcourt Line & Circle – the midcourt line is the center of the court and it divides both baskets. This will be important if you paint lines that act as one-and-one free throw areas, which are used in high school basketball games to decide who gets two shots!
- Free-Throw Line – the free-throw line is used when players are shooting foul shots during basketball games. You can paint it in if you would like to do so but keep in mind that these lines have different dimensions depending on the rules of each league or game being played!
- Three-point Line – the three-point line is one of the most famous lines in basketball because it determines how far a player has to be behind the paint or key area before they can shoot and get three points.
We recommend painting this if you plan on using paint stencils, which we will touch upon later! - Paint Area – the paint area is exactly as it sounds, the paint or key area! This paint line will be important for various reasons.
What Kind of Paint do You Use on a Basketball Court?
There are many paint options to choose from when painting a basketball court. The paint you use will depend on the paint’s durability, cost, and how much time it takes for paint to dry.
- Latex Paint (water base) – if you plan on using latex paint then we recommend either getting Behr or Kilz brand paints. These two brands have great reviews online since they do not take long to dry, don’t leave horrible smells while drying like oil-based paints can sometimes do (they’re also both very cheap!).
- Oil-Based Paints (not recommended if your floor is concrete) – these should only be used if there isn’t any other option because once applied they stay wet longer than water-based paints but that’s also a negative because the paint will get on everything!
- Epoxy Paint – great paint for outdoor surfaces, highly recommended if you’re painting over concrete or asphalt.
It’s also very durable and holds up well to foot traffic so it won’t fade away easily. This paint dries fast but the only downside is that it costs more than your average paint from Home Depot/Lowe’s does.
How Long Does it Take to Paint a Basketball Court?
Depending on what paint you use, paint can take anywhere from a few hours to overnight.
Using Latex Paint
Latex paint dries in under an hour but it will be tacky for about 45 minutes afterwards so make sure that all surfaces are covered before painting over them! If the paint is left out too long then it may start to dry up which means your court won’t look good when finished with paint stencils/lines because they’ll peel off or chip away easily if applied after dried-up paint.
Using Epoxy Paint
Epoxy paint takes around 15+ hours of drying time depending on how thick the coat was initially and how many coats were used. This type of paint is much more expensive than regular latex paints though, plus taking into account other factors like paint equipment and paint costs, a basketball court would cost around $1000 to paint with epoxy paint.
Using Oil-based Paints
Oil-based paints should only be used if there isn’t any other option. Because once applied they stay wet longer than water-based paints. But that’s also a negative because the paint will get on everything! Oil-based paint takes at least 24 hours of drying time so we recommend applying it overnight or before you go out for the day. Since one mistake can mess up your entire project! This type of paint is much cheaper compared to epoxy though (around half the price).
Cleaning Up!
The longest part about painting (and it’s not as bad as you might think!) is cleaning up after yourself! Make sure that all brushes are cleaned out well or put in water if they’re disposable! Oh, and make sure there isn’t any leftover paint stuck inside your sprayer because this can cause paint to clog up and ruin paint equipment.
Extra Tips on Painting a Basketball Court
- Start small with paint application when using stencils until you feel comfortable with applying them all around your basketball court (we recommend practicing in an area where they can be removed without disturbing the real paint job).
Once painted we recommend waiting at least 24 hours before removing any paint left behind by stencils. - If the paint has dried before you are finished using stencils. Then use paint thinner to remove the paint until all that is left behind are your stencil marks!
- Always apply an undercoat first. This will help the paint stay on better and prevent it from flaking off too quickly if there’s excess paint or foot traffic after drying time. You can also prime with spray paints but for walls, priming isn’t necessary. Because of how thick they usually are (we recommend doing so only when painting over other kinds of surfaces).
- Do not put any basketball equipment in areas where paint has already dried – keep them away to avoid stains/damage! Also don’t forget about shoes either, especially since paint gets everywhere! Wait at least 24 hours before walking on paint that has dried.
- Put an easy-to-remove paint drop cloth down first (painters’ plastic or garbage bags work great for this!).
And make sure you’re wearing clothes you don’t care about because paint can get everywhere!
Conclusion
We hope that this blog has been helpful and provided you with paint tips for how to paint a basketball court! We recommend using latex paint unless there is no other option because it dries the quickest. Keep in mind all of these paint tools and materials will cost over $1000. So we also suggest practicing before doing your actual project.
Good luck with painting your basketball court!
Here are Some of our Favourite Basketball Sneakers
Here we will be giving more of an opinion, rather than facts. Are the sneakers worth the price that they are being sold at? Should you upgrade from your current sneakers, depending on what boots you own? What features stand out on these sneakers? If any. Does it do the job? Speed, control, stability etc. Depending on your needs/preferences. We can also mention its durability, if we have collected enough data on the specific sneakers.
What did we expect vs. what we got. Is it maybe overrated/underrated?
Elite
Here’s our pick from the very best of the bunch.
Pro
On your way to the pro leagues? Here’s our pick.
Beginner
Want something to start with? Have a look at our pick.
Steve Farrugia
I'm the 24-year-old former footballer, who could have gone pro was it not for my knee injury! Never heard that before, have you? Jokes aside, my life nowadays really revolves around work, fitness, watching A LOT of sports and spending time with the ones I love (add blogging to that!).
Similar Posts
Construction of a turnkey basketball court|SportObject
The SportObject company offers its services in the construction of turnkey basketball courts. Trusting the construction of our company, you get a whole range of turnkey services, including design, ground work, laying the base and coating, marking and other construction work.
We strictly adhere to the agreed deadlines and provide our clients with a work schedule that indicates the start and completion dates for construction.
Find out why it is safe to cooperate with us
Details
Calculation of the cost of the object
To find out the estimated cost of your object, select the options below or use the detailed calculator available by clicking the "Make a detailed calculation" button.
1. Coating:
Choose the type of coating for your object.
Not selectedAcrylicRubber crumbModular plasticPolyurethane
2. Destination:
Specify where your object will be used.
Not selectedFor suburban developmentsFor educational institutionsFor competitionsFor sports organizationsFor private business
3. Your object:
Specify whether your object is located: indoors, outdoors or it needs a hangar.
Not selectedOutdoor (outdoor)Indoor (indoor)To be built (prefabricated hangar)
4.
Field sizes:
Select the appropriate field size from the list provided.
Not selectedCustomStandard30x18 - (playing dimensions 28x15) 34x19 - for competitions (playing dimensions 28x15)
Specify the parameters of your object in a detailed calculator and get an approximate cost of the service.
Budget savings
We help reduce your costs by up to 40% and avoid unnecessary overpayments.
3 day project
We will design and calculate the exact cost of your object in just 3 days.
5 year warranty
We give great guarantees for imported goods and materials from our warehouse.
421 590* 421590 RUB
* The price is indicated for the basic package with a coating without a base. You can also use the detailed calculator.
Implementation example
Private sector basketball court
Difficulty:
Rubber slabs for outdoor sports grounds are perhaps the most reliable and rational option of all. The coating is made of high-strength crumb rubber and a binding polymer (polyurethane adhesive).
More
Get a consultation
Order a call back and one of our managers will advise you on all your questions
You can also call
8 (495) 240-82-24
By submitting your personal data through the forms on the site, you give your consent to the processing of personal data in accordance with Federal Law No.
152-FZ "On Personal Data" dated July 27, 2006, as amended on July 1, 2017.
Stages of construction on the example of a football stadium
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed). Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc.
We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base. When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds.
That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed).
Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc. We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base.
When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds. That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
Options
How do we work?0003
We carry out construction and installation works
We hand over the finished object and provide a guarantee
Private
I am a private client
We work in all regions of the Russian Federation
We cooperate with contractors who are ready to travel to any city in Russia.
We take measurements, bring materials or buy them in your city, install coatings and equipment.
We offer standard solutions
We are engaged in the construction of both standard and unique projects. We work individually with each client: we take into account your wishes, fit into the budget and comply with the agreed deadlines.
We take care of your budget
We help clients in the selection of materials, places for construction, provide detailed advice and suggest how to get a fully functional sports facility at a lower cost.
We create 3D visualization
We offer the development of a 3D model that will convey a complete vision of the concept of the future object. Also, this service will help both us and the client to eliminate the possibility of error at the design stage.
We make reconstruction and repair
We carry out all types of reconstruction works: we repair the foundation, lay the foundation, replace the coatings, install fences, roof structures, make glazing and ennoble the areas.
I am a frequent customer
Corporate
I am a corporate client
We offer additional services
We are engaged in maintenance of the facility after commissioning: we take care of the condition of sports surfaces, ennoble areas, do glazing and other general construction work.
We take on complex projects
We have enough experience and capabilities to solve the most non-standard and complex tasks. Many of our specialists took part in the preparation of sports grounds for the Olympic Games in Athens and the 2018 World Cup.
We cooperate with global companies
We maintain strong partnerships with well-known manufacturers from Europe and Asia. At the request of the customer, we supply the goods you like from abroad in the shortest possible time.
We provide detailed advice
We answer in detail all the client's questions about the project and our services. Also, we are ready to provide professional legal advice on construction issues.
We build turnkey facilities
We provide a whole range of services: designing an object, drawing up design estimates, building a foundation and base, selecting and laying coatings, erecting roofed structures, installing appropriate equipment and necessary communications.
Our clients
I am a corporate client
Acknowledgments and certificates of conformity
Company "SportObject" offers its services in the field of sports construction.
We are engaged in the construction of turnkey basketball courts: we design, draw up design estimates, coordinate the construction, mount the foundation and roof structures, lay bases and coverings, perform finishing work, provide communications and deliver sports equipment. Each of the stages of work is implemented strictly according to the schedule agreed with the client, which allows us to deliver a fully finished project on time.
We value the trust of each customer and guarantee comfortable cooperation
- We travel to any place in Russia;
- We provide detailed advice on construction issues;
- We select high-quality solutions for the client's budget;
- We help with the choice of an advantageous place for construction;
- We work with complex and non-standard ideas;
- We offer creative solutions within a reasonable budget;
- We provide additional facility maintenance in other regions of Russia.
We supply basketball surfaces from world manufacturers
The dynamics of basketball matches means high speed, sudden movements and heavy loads on the joints.
It is very important that the flooring of the basketball court is both wear-resistant and injury-proof at the same time. For basketball courts we offer: tennis, hard or soft-hard, modular plastic, polyurethane coating and crumb rubber coating.
Our company only works with proven materials that have passed the strictest quality control, so we offer a wide selection of outdoor basketball surfaces from domestic and foreign manufacturers, such as: ERFOLG , BERGO , Plastfacto , Conica , Novol , Aropa , CRUMB , GUMBIT 90 MASTER FIBER and many more.
In addition to the construction of basketball courts, we take care of the complete set of the object and provide it with all the necessary equipment until it is ready for operation. In accordance with the requirements of the customer, any sports equipment can be installed: backboards, rings, stands of a certain capacity, running tracks, a sector for standing long jumps and, of course, various types of fences.
We offer metal fences or safety nets at the customer's choice
- Metal 2D and 3D railings are sectional structures of increased strength with rod diameters from 4 to 6 mm, protected by a polymer and zinc coating. Unlike other fences, mesh panel fencing is maintenance-free - it does not collect dust, does not fade in the sun and does not deform under wind loads, and also does not need periodic painting
- Protective mesh made of kapron or nylon threads can have different mesh sizes: 100x100, 40x40 or 20x20. Such a fence is ideal for zoning the playing space and protecting spectators from sports equipment. The mesh does not need maintenance and is easily restored
While building new basketball courts, we also work on existing facilities that need major repairs or minor restoration. We are happy to undertake the design of a sports facility, without including construction work, and for the implementation of the facility according to an already finished project.
You can ask us a question, leaving your contact details. We will call you back shortly.
You can also call
8 (495) 240-82-24
Basketball field 🥝 basketball at home, photos, drawings
- Choose the location of the site
- Create the site surface
- Setting up a basketball corner
- Which ring is better?
- Footage
Very soon the summer season will come, and many parents with their restless children will leave the city. Adults, as usual, will dig in the beds, but what should bored children do at this time? In this article, we have prepared information for you on how to make a basketball hoop with your own hands, and with it a playground.
back to content ↑
Choosing the location of the site
This issue should be approached very responsibly, because many factors must be taken into account. It is desirable that the playground is located at a distance from the house and from the garden.
So, here are the places that are by no means suitable for placing a basketball court:
- On uneven terrain. Any sports ground implies a perfectly flat playing surface.
- Near water bodies. It is contraindicated to play near any bodies of water, especially if you have children. It is possible that the ball will fall into the water and the fidgets, wanting to show their independence to their parents, will go to get it themselves. They will most likely end up in trouble.
- In the lowlands. There, the site will dry for a very long time after various precipitations, which means that it will be used very rarely and will soon be abandoned.
- A court where groundwater is located nearby is also not allowed to play. Every year the landscape will change, as a result of which the fixation of the shield with the ring will warp.
back to contents ↑
Creating the surface of the court
0003
- Remove topsoil from the surface.
To do this, dig in about 50 cm of earth. Such a procedure is necessary in order to continue laying the drainage cushion, which is laid in front of the main coating. - Lay the geotextile on the soil. To do this, it is cut into separate pieces, because it goes in a whole canvas. Such pieces can be stacked in any position. The main thing to consider is that they cover each other by about 20-30 cm, which excludes subsidence of the upper layer.
- After that, the geotextile is sprinkled with sand and leveled, the thickness of such a layer should be approximately 15 cm.
- Lay the geogrid, which will later serve as a reinforcement of the entire structure. The grate is half filled with sand, and the other half with crushed stone. The layer thickness also remains 15 cm.
- Fill with cement to form expansion joints. This is necessary so that the top coating is well fixed for a long time. In addition, after various precipitations, water will quickly seep through all layers, which will contribute to the rapid drying of the playing place.
- After all the steps taken, the topmost layer is laid on the treated surface. It can be any surface: a sports lawn, a special mixture of sand and clay, a roll coating, and others.
back to contents ↑
Equipping the basketball corner
Even when the foundation was just being installed, it was necessary to think about where our hoop would hang. For convenience, racks with rings are installed along the edges of the site, as in a real gym. Here are the dimensions to be met:
- The minimum distance between posts is 3 meters.
- Field area must be approximately 20 x 35 m.
- The ring itself should be approximately 2m from the ground.
Making a backboard
Making a basketball hoop with your own hands, like a backboard for it, is not difficult at all. To make a shield on our own, we just need to adhere to the following algorithm:
- Make a frame from metal corners that need to be welded together according to the given dimensions.
- Select the necessary boards in order to make a wall. When they are fastened together, some gaps may remain, but they will not interfere with the game at all. Just make sure the boards are level.
- Next, the finished shield needs to be painted to your liking. Children can be involved in this procedure, because, as you know, they are the best designers.
We make the main component
Here we look at the classic braided version and learn how to make a basketball hoop with your own hands. In general, it is not so difficult to make, the main thing is to show a little accuracy and desire.
To create braided rings, summer residents will need only two things:
- The base of the ring. Usually it must be made of iron.
- Strong threads. They can be seen: thin rope, cords, thick yarn, any rope.
So, what needs to be done in order for its main component to appear on your site:
- At the very beginning, you need to make an iron blank in the form of a ring and highlight a small protrusion in it.
The diameter of the circle must be such that the ball can pass freely into it. It is better to entrust such work to the stronger sex. - Then comes the women's work. To do this, we take a rope and cut it into 8 equal parts. Then you need to tie them at the previously planned distance so that two ends of one thread hang down.
- After that, it's time to start weaving the mesh. To do this, the adjacent ends of the segments of a thick thread are tied into knots, obtaining different grid cells. All ends of the ropes are required here. Thus, it is necessary to make several layers of cells until the threads run out.
back to contents ↑
Which ring is better?
After making a basketball hoop with your own hands, you involuntarily wonder what is better: a shop hoop or one that we made ourselves?
Of course, a thing made by one's own hands is always the most pleasing to the eye. But it takes much more time to make it than a ring that can be bought in a store in a couple of minutes.
