How many basketball courts make a mile

How Many Laps Around Different Basketball Courts Make a Mile

Are you new to the hoops game? Or a coach looking to improve the conditioning of your players? If so, you may be wondering how many laps around the basketball court make a mile.

When it comes time to run laps, keep in mind that all basketball courts don’t have the same dimensions. Find out how many laps around different sized courts you need to run to make a mile in this post. We’ll be using the dimensions of an indoor basketball court at each level.

Table of Contents

• Dimensions of Different Basketball Courts
• How Many Laps Around Each Court Makes a Mile
• How Many Laps Around Each Court Makes a Half-Mile
• How Many Laps Around Each Court Makes a Quarter Mile
• What Are the Dimensions of Olympic Basketball Courts?
• Why Do Basketball Coaches Make Players Run Laps?

Did you know that not all basketball courts are the same size? The perimeter of each court varies depending on the age and skill level of the basketball players. Here is a closer look at the dimensions for each different court.

Junior high basketball courts are 74 feet long and 42 feet wide. A kid playing youth basketball is normally in the sixth, seventh, or eighth grade, so the smaller sized court makes more sense for them. You wouldn’t want to put young players on a standard high school court.

A high school court is 84 feet in length. The width of the basketball court in high school is 50 feet. Since high school basketball players are older and larger than junior high players, playing on a junior high court would be too easy for them.

Basketball courts in the NBA and college basketball are 94 feet long and 50 feet wide. Note that there is no change in width from the high school level to the college and professional level. The only change is in the length of the court.

This question comes down to simple math. We know that the number of feet per mile is 5,280. Now, we simply have to take the length of the court and multiply it by 2. We will do the same calculation for the width of the court. 

After finding this number, we are ready to do our calculations. So, for a junior high basketball court, we take the length of 74 feet and multiply it by 2 for a total of 148 feet. We also take the length of 42 feet and multiply it by two for a total of 84 feet. 

Now, we’ll add those two numbers together for a total of 232 feet. Next, we take the one-mile total of 5,280 feet and divide it by 232 feet. This means that it will take 22.75 laps on a junior high school basketball court to make a mile.

For a high school basketball court, we take the 84 feet in length and multiply it by 2 for a total of 168. We take the width of 50 feet and multiply it by 2 to get 100. That leaves us with a total of 268 feet for one lap.

Again, we divide 5,280 feet by 268 feet. That tells us that it takes 19.7 laps to make a mile on a high school basketball court.

Now we get to the big boys. Both college basketball courts and NBA courts have the same dimensions of 94 feet long by 50 feet wide. Let’s follow the same mathematical procedure.

We take 94 and multiply by 2 to get 188 feet. We take 50 feet and multiply it by 2 to get to 100 feet. This gives us a total of 288 feet.

After dividing 5,280 feet by 288 feet, we see that it takes 18.33 laps to make a mile on both college and National Basketball Association courts.

Now that we have the formula down, finding out how many laps it takes to make a half-mile is pretty simple. Just take our other answers and divide them by 2.

• So, using that formula we see that it takes 11.375 laps on a junior high school basketball court to make a half-mile.

• A high school basketball player will have to run 9. 85 laps to make a half-mile.

• It takes 9.165 laps on an NCAA basketball court to make it a half-mile. It’s the same on an NBA court

Again, since we know the formula, we can find these answers fairly quickly. All we have to do is take our original answers for one mile and divide them by 4.

We already know that it takes 22.75 laps to make a full mile on a junior high basketball court. So, that means that it will take a player 5.69 laps to make it a quarter-mile on a junior high basketball court. (22.75 / 4 = 5.6875)

Using that same formula, we also see that a player will only need to run 4.93 laps to make a quarter-mile on a high school basketball court. How’d we get to that number? Take the 19.7 laps that it takes to make a full mile on a high school court and divide by 4. (19.7 / 4 = 4.925)

To figure out what makes a quarter-mile on an NCAA basketball court or an NBA court, take the 18. 33 laps that it takes to make one mile and divide by 4. That standard set of measurements tells us that it takes 4.58 laps to run a quarter-mile on a college or NBA basketball court. (18.33 / 4 = 4.5825)

Many folks assume that Olympic basketball courts have the same dimensions as NBA courts. Surprisingly, that is not the case.

An International Basketball Federation (FIBA) court is a tiny bit smaller than an NBA court. An NBA court is 50 feet wide, while an Olympic court is only 49 feet wide. A FIBA court is also two feet shorter in length than an NBA court (92 ft vs 94 ft).

Another stark difference between the two courts is the dimensions of the three-point line. The three-point line in the NBA is 22 feet away from the basket in the corners. The FIBA three-point line is only 21.65 feet away from the basket in the corners.

Directly above the break, the NBA three-point line is 23.75 feet away while the FIBA three-point line is 22. 15 feet away. Those minute differences may not sound like a lot, but professional basketball players are remarkably more accurate the closer they are to the basket.

At all levels of basketball, coaches have players run laps around the gym. They do this for a couple of reasons, which we will discuss below.

Punishment

This reason is probably the most common. Coaches are notorious for making their players run laps as punishment for poor performance on defense during a game. They also may make players run laps when they do certain basketball drills incorrectly during practice.

For example, my junior high basketball coach used to make each player run one lap for every free throw that he missed during the game. Other coaches may make their players run one full-court sprint for each time that they turned the ball over during the game. 

Conditioning

Basketball is a tough game and it requires that each player be in good cardiovascular condition to play full-court ball. For that reason, coaches will order players to run laps before or after practice. If you hate running, you should have reservations about playing organized basketball.

Running laps helps build up a player’s stamina so that he won’t get tired in the latter stages of a game. No basketball coach wants to see any of his players gasping for air during crunch time.

A popular form of conditioning is called running “suicides”. To run a suicide, a player starts at the end line underneath the backboard. He then runs from the end line to the free-throw line and back to the end line.

Next, the player sprints from the end line to the half-court line and back. He then runs from the end line to the other free throw line and back. Finally, he runs from one end line to the other end line and back. The crazy thing is that all of that sprinting only counts as one suicide.

Mike Noblin

Mike has been involved with basketball for over 30 years as a player, coach, and bettor. He has a degree in Sports Psychology and enjoys following both the NBA and College Basketball on a nightly basis.

How Many Laps Around a Basketball Court is a Mile?

Have you have ever played on an organized basketball team as a kid or young adult? If so, then you have probably had the experience of running laps around the basketball court. Whether it is for warm-ups or as punishment, it can be a common part of basketball practice for young players.

Let’s face it, basketball involves a lot of running, especially when playing full-court ball. So the real intent of coaches making us run laps around the court was to get us in shape and help us to have good stamina. Coupling all of that running with defense and shooting drills and it will build in-game stamina even more.

So, with all that running around the court, did you ever wonder how many laps you had to run around it to go a mile? I used to think about it while I was running, but I never really stopped to figure it out. In fact, it is quite easy to calculate but let’s first take a look at the quick answer. After that, we can discuss how it is calculated and whether or not there are differences for different court sizes such as youth, high school, college, and NBA.

Contents

• Quick Answer
• My Personal Experience
• How to Calculate the Number of Laps in a Mile
• Laps per Mile for other courts
• Final Words

Quick Answer

If you were running laps in high school, you were most likely on a regulation size high school court. For this size court, it would have taken you about 19.7 laps to run a mile. This means that those 20 laps your coach made you run for being late to practice was a little over a mile.

My Personal Experience

Sure, I have run plenty of laps around the basketball court as a player but I have a somewhat funny story from the perspective of a coach. As a coach of my daughter’s rec league team, I never had players run laps for being late, but I did have them run laps to warm up. One particular season, there was a young lady that was consistently late to practice.

Oddly enough, this young lady would always show up just as we were completing our warm-up laps around the court. This player also happened to be a friend of my daughter. Since I was a little concerned about her, I asked my daughter to see if she could find out why she was always late. Maybe she needed a ride to practice.

Sure enough, my daughter found out that the player was purposely coming late so that she could avoid running laps. In fact, she would have her mother take her out to eat and stay long enough so that she could be late to practice and miss warm-up laps. There was no doubt in my mind that the mother was in on it also and allowing her daughter to miss warm-up laps.

Once I found out what was going on, I changed up my practices so that at the beginning we played fun games like HORSE, knock out or 21. Once this young lady arrived at practice, we would immediately stop the game and I would announce that she was there and that we can now start running warm-up laps.

Needless to say, she started getting to practice on time and we went back to running warmup laps as normal. We would run 5 laps, probably about ¼ of a mile (and yes, I would run with them).

How to Calculate the Number of Laps in a Mile

So, let’s get back to discussing how many laps around a basketball court equal a mile. Above we saw that it takes 19.7 laps to complete a mile around a high school size basketball court. So you might be wondering, how did we come up with that number? It is rather simple to calculate. Let’s dissect it a little deeper.

We can find out using basic math. If you remember back to your 6th-grade geometry class, the key to this is calculating the perimeter of the basketball court. If you don’t remember what perimeter is, don’t worry, it’s been a long time since the 6th-grade for many of us, so we will bring you up to speed (there won’t be a quiz at the end either).

The perimeter is the length or distance around the outside of a shape. In this case, it is the rectangle shape of the basketball court. If you know the length and width of the basketball court, you can calculate the perimeter using the following equation :

Perimeter = 2 x Length + 2 x Width

Or for short

P = 2L +2W

See the photo below and this might make a little more sense.

Our measurement for perimeter will be in feet, so we will need to convert 1 mile into feet also.

1 Mile = 5280 feet.

Now to find the number of laps around a court we just need to divide the number of feet in a mile by the perimeter so we will have the following equation.

Laps per mile = 5280/P or 5280/(2L+2W)

For our standard highschool court which has a length of 84 feet and a width of 50 feet we can now plug the number in as such :

Laps per mile = 5280/(2×84 + 2×50)

                           = 5280/(168+100)

                           = 5280/268

                           = 19.7 laps

Easy right? It probably just took a quick refresher to remember how to calculate perimeter and complete some simple division. One thing that we must remember is that basketball courts for different levels such as high school, college, NBA, FIBA, and others are all different. Now that we have an easy way to calculate laps per mile, let’s take a look at what is for other courts.

Laps per Mile for other courts

Below are the dimensions of other regulation courts. We can use these length and width measurements to calculate the number of laps around these courts also. Note that US college and NBA courts have the same measurement.

College/NBA
Length = 94 ft.
Width = 50 ft.
Laps per mile = 5280/(2×94 + 2×50) = 18.33

High school
Length = 84 ft.
Width = 50 ft.
Laps per mile = 5280/(2×84 + 2×50) = 19.7

Junior High school
Length = 74 ft.
Width = 42 ft.
Laps per mile = 5280/(2×74 + 2×42) = 23.2

FIBA/Olympic (measured in meters so we need to convert to feet)
Length = 28m = 91.9 ft.
Width = 15m = 49.2 ft.
Laps per mile = 5280/(2×91.9 + 2×49.2) = 18.6

There may be other size courts, such as ones in elementary schools and exercise gyms. It’s hard to say what the length and width of these courts are because they are most likely not standard in size. All you need to do is find the length and width and you can now calculate the number of laps needed for a mile.

Final Words

As you can see, once you know the length and width of the court or any other area that you are planning on running around, you can calculate the number of laps it takes to run a mile. You can even calculate the number of laps needed to run a mile on your own basketball court in your driveway or back yard.

What kind of basketball coach did you have? Did you have to run laps for making mistakes or being late? We’d love to hear your interesting stories.

Basketball court markings: standards and norms

Author of the article

Khvatkov Dmitry

Consultant in the production of rubber coatings

Basketball field marking requirements are approved by the FIBA ​​standard. The site must be flat with a hard surface, free of bends, cracks and other obstacles. The accepted dimensions of the field are 28 m long and 16 m wide. By NBA standards, the field is slightly larger: 28.7 m (94' ft) long and 15.3 m (50' ft) wide.

Areas not intended for international competitions may differ from accepted standards (for public use, in schools or universities, etc.) and usually vary from 20 to 28 m in length and from 12 to 16 m in width.

Basketball Court Marking Standards

Basketball court markings are conventionally divided into 5 components:

• Boundary lines. They are located along the perimeter of the site and set its size. The lines that run along the field are called side lines, and those that are behind the baskets are called front lines.
• Central line. Divides the court in half parallel to the front lines.
• Central zone. It is a circle and is placed in the middle of the center line, and, accordingly, in the center of the entire field.
• Three-point line. It is a semi-ellipse and is located around the shields on both sides of the field. It limits the close range.
• Free throw line. It is located in front of the boards parallel to the front line and is limited on the sides by paint lines.

The standard line width is 5 cm. All outlines and lines must be of the same color (usually white) and be clearly visible from anywhere on the court.

Common lines

Common lines are used to limit the playing area of ​​the court. The side lines (along the field) according to FIBA ​​standards should be 28 m long, and the front lines - 16 m. For public areas, deviations from the accepted standards are allowed. Typically, basketball courts in schools or gyms are made from 20 m long and 12 m wide.

Central lines

The center line is parallel to the front and divides the field exactly in half. According to the standards - it should extend beyond the side lines by 15 cm on both sides.

In the middle of the center line there is a circle with a diameter of 3.6 m, which limits the central zone of the field. In this zone, the ball is played at the beginning of the game.

Three-Point Line

Three-Point Lines are located around the backboards on both sides of the field and consist of two straight lines 2.9 long9 m and a semicircle. Straight lines run perpendicular to the front at a distance of 0.9 m from the side lines. Despite the fact that visually the distance from the ring to the side of the three-point line seems to be less than to its central part, the distance from the backboard to any point is 6.75 m.

Penalty lines

Penalty lines limit the nearest area at the backboard. They consist of a trapezoid and a free throw zone.

Despite the name, the "trapezium" is a rectangle (until 2009year it really was a trapezoid), which is located under the shield. Its dimensions are 5.8 meters long and 4.9 meters wide. The shield is located at a distance of 1.575 m from the end line in the middle of the site. In front of the backboard, at a distance of 1.25 m, there is a semicircle that limits the area for picking up the ball.

At a distance of 4.225 meters from the backboard, the trapeze zone ends and the free throw zone begins. It is a semicircle with a diameter of 3.6 m (like the central circle).

Paint zone lines

These lines are serifs on both sides of the trapezoid (parallel to the sidelines). They limit the areas for players who are fighting for the ball during a free throw.

Zones on the basketball field

The basketball court is divided into zones using markings. Each zone has its own specific rules.

Center circle

The center circle is used as a separate kick-off area at the start of the game. One representative from each team stand in a circle from their side and fight for the ball in a jump, after it is dropped by the referee. All players are exclusively on their side of the field, except for one who rebounds on the opponent's side.

Neutral zone

The peculiarity of this zone is that as soon as the player of the attacking team with the ball crosses the center line and is on the side of the opponent, he cannot pass the ball to the player of his team who is on the other side of the field (i. e. behind center line on your side).

Three-point zone

The three-point line limits the near zone of the shot. Hitting the basket from outside the basket brings the team three points. If the throw was made inside the zone, then it brings two points.

Three-second zone

This is the zone in close proximity to the ring. It is called three-second, since the player of the attacking team cannot be in it for more than three seconds. Most balls are thrown in this zone, so when attacking, it provides maximum protection.

Free throw area

In controversial situations, a free throw is provided from this area. The player of the attacking team must score the ball without stepping over the line of the trapezoid. At the same time, the players of both teams are not in the three-second zone. They take up positions along the paint lines on the sides of the trapezoid and may not step outside the lines until the free throw shooter has shot the ball.

How to mark a basketball field?

Basketball field markings, whether it is an international competition court or an open-air amateur field, are best applied using special equipment. This will ensure the long life of the coating, the lines will not clog and will promote fair play.

You can order the marking of a basketball court in Moscow and the Moscow region from Rezkom. We will measure the premises and develop a design project for the field so that it complies with generally accepted rules and is convenient for operation. For more details, you can contact our manager by phone 8-495-64-24-111.

Sports field markings

Warranty obligations are a distinctive feature of companies that value their reputation. If you want to order a coating for a sports ground, be sure to pay attention to the manufacturer's warranty on the work performed. Ideally, if the warranty for the coating is 3-5 years, most often manufacturers of rubber coatings give a 1-2 year warranty for the work performed.

Our company necessarily provides a guarantee for the work performed, provided that the coating is made from our own materials.

Content:

The only thing that is not covered by the warranty is the markings for the sports ground, made free of charge with alkyd enamel. But at the request of the client, we can also mark the sports ground on the rubber coating with professional rubber paint. In this case, the marking warranty will be the same as the rubber coating warranty.

Badminton court markings.

The badminton court has a size of: 13.4*6.1m (for a single badminton game 13.4*5.18). A grid is stretched in the center of the site, the height from the floor to the upper edge of the grid is 155 cm. The width of the marking line is 40 mm. You can order a turnkey badminton court from us About badMinton

Basketball court markings.

The standard size of a basketball court is 28*15 m. The minimum allowable dimensions are 26*14 m. The width of the marking lines is 50 mm.
You can order turnkey basketball court coverage from us About basketball

Volleyball court marking.

The standard size of a volleyball court is 18*9 m. The playing field includes the playing field itself and free zones. Dimensions of the free zone: distance from the side lines 3-5 m and from the front lines - 5-8 m. The height of the free space above the playing field is 12.5 m. In open areas, a slope of 5 mm per 1 m is allowed for drainage. The width of the marking lines is 50 mm. In the center of the playing field for volleyball, a net is installed vertically above the centerline axis. The top edge of the net is set at a height of 2.43 m for men and 2.24 m for women.
You can order a turnkey volleyball cover from us About volleyball

Tennis court markings

The standard dimensions of a tennis court are 23.77*10.97 m (for a single game 23.77*8.23 m). The width of all lines marking the area is not less than 2.5 cm and not more than 5 cm, except for the back line, which may be 10 cm wide. Races must have the following dimensions: not less than 6.4 m behind each back line and not less than 3.66 m - for each side. Net height in the center of the site 91.4 cm must be held by a white belt no more than 5 cm wide.
You can order a turnkey tennis cover from us

Handball field markings.

The handball court is a rectangle measuring 40 * 20 m. There must be a safety zone around the playing field, the width of which is at least 1 meter along the side lines and 2 meters behind the outer goal lines. Goals are placed in the center of each outer goal line. Gates must be securely fastened to the floor or to the wall behind them. The internal dimensions of the gate: height - 2 meters, width 3 meters. The goal lines between the goal posts must be 8 cm wide, while all other goal lines must be 5 cm wide. You can order turnkey handball coverage from us About handball

Mini football field markings.

Mini football playground markings have a minimum size of 25*15 m and a maximum of 25*42 m. For international matches: length - minimum 38 m, maximum 42 m, width - minimum 18 m, maximum 22 m. All lines are 8 cm wide . You can order turnkey futsal coverage from us About futsal

Football pitch markings

The marking of the football pitch is a rectangle, where the touch line should be longer than the goal line.

Learn more

• 
  How to make basketball court model
• 
  How to watch ncaa basketball final four
• 
  How wide is a standard basketball court
• 
  How to be a good team player in basketball
• 
  How to use misdirection in basketball
• 
  How to become good at basketball in a week
• 
  How much does it cost to get a indoor basketball court
• 
  How to play full court basketball
• 
  How does the 3 second rule work in basketball
• 
  How to place bets on basketball games
• 
  How tall is a regulation basketball rim