Home »
Misc »
How much antifreeze in basketball base
How much antifreeze in basketball base
How To Winterize Basketball Hoop
Last night we experienced a blizzard. This morning when we went out to check the condition of our portable basketball hoop, it brought a big smile onto our face.
This is because we winterized our basketball hoop a few days ago & now, it is standing in its place with no damage done.
Sadly a few moments later, one of our neighbors came with a half broken backboard in his hand. His hoop got shattered yesterday.
I asked why he hadn’t winterized the hoop before. In reply, he said he had no clue whatsoever how to do it. Therefore, we decided to write this article on how to winterize a basketball hoop.
Winterizing a basketball hoop is a smart idea if your location sees a lot of snowfall in the winter season. Your hoop base will crack if water freezes, or a strong wind can just blow your hoop away
Either way, you will land in trouble & it can cost you extra bucks to repair the damage. With In-ground hoops, there is no way these bad things can happen.![]()
Still, you’ve to do some work.
Basketball hoop winterizing tasks can involve securing the base & then protect from rust. It can also be like draining the base & disassemble the hoop. Then there are In ground hoops too.
So depending on the basketball hoop type (portable or in the ground) & whether you want to take down the hoop or leave it outdoors, steps can differ. So keep on reading this complete beginner’s guide to winterizing basketball hoops.
Table of Contents
- Ways of Winterizing Portable Hoops
- # In case of leaving basketball hoop in backyard:
- Secure the hoop base with water
- Secure the hoop base with Sand
- Secure the hoop base with BaseGel
- Secure From Windy Storm
- Protect From Rust
- # In case of taking down the hoop:
- Ways of Winterizing In Ground Hoops
- Frequently Asked Questions
- Final Thoughts
Ways of Winterizing Portable Hoops
# In case of leaving basketball hoop in backyard:
This is the case where some people might want to play hoops during cold winter months.
So they are not going to disassemble the hoop.
Rather than that, they will look to winterize the basketball hoop in a way that gives them the option to use hoops anytime they want.
It can be done in a few steps:
- Secure the hoop base with water, sand or basegel
- Secure from windy storm
- Protect from rust
Secure the hoop base with water
If you have a water-filled base system, there is some work to do. Water tends to expand at freezing temperature, and your base can crack then. By adding antifreeze into the water, you can get rid of this problem.
What is antifreeze?
One type of additive that can be used to lower the freezing point of water based is liquid. It increases the boiling point of the liquid. Basketball hoop base antifreeze does the exact thing.
Why mix antifreeze with water?
If you don’t know, water is an efficient conductor of heat, and it has good properties as a coolant.
Adding antifreeze into water creates a coolant mixture. It prevents a rigid enclosure (like a basketball base) from cracking because of expansion when water freezes.
What kind of antifreeze do you use in a basketball hoop?
You should only use non-toxic antifreeze for the basketball base. This is due to the toxicity of anti-freeze
Antifreeze containing ethylene glycol & methanol is the most hazardous. A small amount of antifreeze can cause life threatening complications in your blood, nervous system & kidneys. Propylene glycol is found less dangerous.
Antifreeze tastes so good that children & pets can easily be attracted. So you should keep it out of their sight & reach. When you’re using them, you have to be careful. If it spills somehow, you should clean it up immediately.
While they both are safe & affordable, you should also use chlorine bleach in your water. Because unwanted stuff can start growing inside water and it will smell not good then.
How much antifreeze does it take to keep water from freezing?
The common ratio of using anti-freeze and water is 50/50. That is more than enough for a 35 or 40-gallon base.
With that being said, it all comes down to where you live & how cold it gets there. Based on this, you can add more. We have seen people using only 1 gallon of Antifreeze for the whole base.
Here is a video demonstration of putting antifreeze into portable basketball bases.
Secure the hoop base with Sand
Sand is a lot heavier than water, so it makes your basketball hoop more secure than ever. Just remember one thing. It is difficult to move it around when you are using sand for a basketball base. If you have been using sand to fill the base for quite some time, then you should be very familiar with it
Assuming you are using water till at this point. But now you don’t want to take a risk with antifreeze then we recommend draining the base first and fill with sand
There are a couple of ways to do it:
1.
Draining water from the base is easy. Just lay the hoop on its side, open the base hole, and now you can drain out water with ease
2. You can siphon it out with siphon pump
3. Also, you can use a hose and let gravity do the work for you. We don’t recommend sucking on it.
Secure the hoop base with BaseGel
It is true if you fill the base only with water, there is always a chance for base leaking, freezing, or evaporating. Many prefer sand for this reason, and it brings more stability.
But there are people who don’t like sand because it literally takes out the ease of transportation. They are not too sure about antifreeze either, so they can just add basegel into the water.
It gives the same amount of stability as sand. BaseGel is cheap and lasts for several years. It is for all-weather use. So you don’t have to bother about those messy situations anymore
Secure From Windy Storm
scenario, it may fall over.
Apart from properly securing the base with water & sand, this is what you can do:
1. Check all the nuts & bolts. Tighten them up if there are loosened
2. Use the strapping method to protect from heavy wind. You will need Liberty Ground Anchor & Ratchet Straps to make sure it works perfectly
Ground anchors should be placed on both side of the base, and then the strap should be hooked onto the anchors
3. Lower the pole of your hoop. Doing so will give your hoop stand more strength to withstand the impact of wind
If you want to secure your portable hoop from wind, we recommend checking out this guide: How To Keep Basketball Hoop From Falling Over?
Protect From Rust
In the wet season, the cold temperature, snow, ice can combine altogether & deteriorate your backboard, pole, rim, net material. The hoop unit can get rusted if not taken properly care of. Here are few things you can do:
1.
Routine Cleaning
2. Repaint the surface by removing all the loose paintings
3. Get a heavy-duty, durable barbecue cover. This all weather-resistant, dustproof cover will protect your hoop from impacts of wind, sand storm, sun & rain. They are easy to clean as well. You can use duct tape to secure it
4. If some areas of your hoop are already rusted, then you can apply a rust protective.
5. Remove the net when there is no play. Otherwise, it can deteriorate if dealt with harsh weather conditions.
# In case of taking down the hoop:
If you are not going to shoot hoops during the rainy season, which most people do, then it will be better to disassemble the hoop & store it in a covered place.
This can be done in a few steps:
1. Remove the backboard & rim attached to your hoop. It will come in handy in the next step.
2.
Remove the pole. With no backboard and rim are attached, it is not as heavy as before.
3. Empty the base unit
4. Now, store all the components properly in your garage. There will be nuts & bolts for different parts. So put them separately in a small box and place them right beside that particular unit
Portable hoops are moveable. Whether you choose to dismantle the hoop or not, bringing it under the cover is always the best idea to winterize basketball hoop.
Ways of Winterizing In Ground Hoops
Basketball hoop for the outside has concrete installation. Unlike portable hoops, they don’t have any plastic bases. Instead, they are perfectly secured deep into the ground.
So there is no way you're in ground goal can fall over or blow away by the wind. Besides, there is no risk of base leakage or water freezing.
Still your backboard, rim & pole are left exposed to the weather elements. If they continuously encounter with heavy rainfall, it can also deteriorate the materials
Two things you can do here:
1.
One is removing the backboard & rim. If it seems a herculean task to you, then skip this one & do the second
2. Protect your hoop unit from rust. The task of rust prevention involves regular cleaning, repainting the surface, purchasing waterproof cover & applying rust preventative. It is advisable to remove the net. Also, keep the hoop at its lowest height adjustment.
Frequently Asked Questions1. Water inside my hoop base is already frozen. The base is yet to crack, though. Is there anything I can do to prevent it from cracking?
-If your hoop base is not broken, try to take off the hole plug. Then pour some road salt (salt is generally spread to melt ice on areas where there is a lot of snow & ice in the cold season). It will help in lowering the freezing point
Finally, when the ice is melting into liquid, just drain the base & fill it with sand.
It will eliminate the risk of the base being cracked. You can also use antifreeze with water or just BaseGel.
2. Should I use sand or water to fill my base?
-There are many who face a dilemma whether to put sand or water in the basketball hoop. Water is a good choice if you think about getting advantage in transportation
But it tends to freeze in winter, and also if there is any leakage in the base, you might not notice it
In contrast, sand provides more support to your goal, and you can use them all year around. If your preference is water, you need to add antifreeze in the winter season.
Final ThoughtsNo doubt, storing indoors shall increase the lifespan of your basketball hoop. But disassembling the whole unit might feel troublesome & time consuming, so if you ask us, we would suggest you leave it outdoors
For portable hoops, fill the base with sand, bring the hoop at the lowest height, wrap with a cover.
You can give your base extra security through the strapping method. Apply rust preventative or repaint if needed. You can also do some routine cleaning
For in ground hoops, do as it’s written in this article.
You can also check out our basketball hoop maintenance guide and get more valuable information.
A Quick Guide to Winterizing Portable Basketball Hoops
If you have a basketball hoop, it would be awesome if you’d take care of it. You want to know how to winterize a portable basketball hoop, protect it from wind and freezing, and you want it to last so that you don’t lose money for repairing it or even buying a new one.
If you’re not going to move it under the cover, here are the three steps you need to do to winterize a portable basketball hoop:
- You need to secure it from the wind. You don’t want to risk it falling on someone.
I just took two of these 16-inch anchors and lagged them into the ground on the opposite sides of the base.
Along with anchors I bought this ratchet strap and tied it to anchors to secure it. - You need to protect the base from freezing.
This is what we’re going to talk about today. Read on. - You need to cover it up and protect it from rust, especially if you’re living in a wet area.
Also this way drunk teenagers won’t notice it overnight. The simplest thing you can do is use the largest barbecue cover you can find. This 58” BBQ Grill Cover will do the work.
How to prevent basketball hoop base from freezing
1) Drain the water from the base. This is how to do it…
If you want to be environmental-friendly, and not use antifreeze, you might want to drain the base. It’s an easier and cheaper option if you have time to deal with it.
You can try to empty the base laying the hoop on the side. There will still be some water in it afterward, so you’ll need to tip it around a bit until it’s completely drained out. Remove the pole and plastic plugs in holes on top.
You don’t want to damage it.
If the hoop seems too heavy or you just don’t want to do the hard work of disassembling it, you can siphon it out with a siphon pump.
I’m happy with my Siphon Pro XL which I use for other things, but I’m sure it will work just as fine for this purpose.
You can also put the hose in the base and another end of the tube on the ground so that the gravity do all the work. Suck on it a little bit, but don’t let the water come close to your mouth.
2) Add antifreeze to the water in the base
If you don’t want to put sand in the base because you want to move it occasionally, there’s not much you can do but to add antifreeze.
Portable basketball hoop bases are made out of high-density polyethylene plastic and in most cases, they don’t break. They are flexible enough to expand when the water goes under 15 below 0 F.
When adding antifreeze to water, you should know two things. What antifreeze you should use and in what ratio with water.
What antifreeze to use?
The answer is non-toxic antifreeze for basketball hoop base. Antifreeze increases the boiling point by more than 10 degrees Fahrenheit. Plants and animals are in great danger when antifreeze is uncarefully used so it should be treated and stored with full care.
If it spills, it should be cleaned up immediately. A minimal amount can damage a CNS, and it can even cause death. It’s estimated that over 9,000 pets are accidentally poisoned with antifreeze through ingestion. The effects of antifreeze on the environment are brutal.
So, depending on the brand, the labels usually suggest adding non-toxic antifreeze.
What ratio with water?
Although some people believe that the ratio should be 50:50, which eventually stops them from buying non-toxic antifreeze, that is not true at all. You have two options.
- You can use 2-3 8lbs bags of Calcium Chloride 77% dissolved in a big can of water, and you’re good to go.
But be careful, this mixture can get very hot. Allow it to cool enough before moving into portable basketball hoop base. - Or you can use 2 – 4 bottles (depending on the size of the base) of non-toxic, biodegradable pool antifreeze concentrate, safe for pets and kids. This is also the best option because of the simplicity of the procedure.
Both of these options are better and safer for the environment than automotive ethylene glycol based anti-freeze. Plus, they’re less expensive.
3) Use sand or BaseGel instead of water
If you choose to fill the base with sand instead of water, you do have good reasons for it. A 40-gallon base filled with water weighs around 320 lbs. If you put the sand in the same support base, it’s weight will go over 500 pounds.
It’s clear enough that sand brings more stability and won’t allow for leaking, freezing or evaporating. Sand doesn’t even cost much, as you can purchase it at Home Depot for about $4 per 50 lbs bag.
The BaseGel gives the same effect as around 390 pounds of sand. If you already filled a base with water, you can add a half of BaseGel to make it more firm.
It can last for years, and that makes it also an excellent option because it’s almost as stable as sand and you can get it back to its natural state (gel) in a few minutes; you just add a mixture of water and salt. You can get Basegel on Amazon for affordable price.
What should you do if the water’s already frozen?
First, you need to check if your portable basketball hoop base is broken and will the cap come off. If it’s not, and if the cap comes off, pour some road salt in it.
Salt dissolves into the liquid in the ice and lowers its freezing point. If you live in a city that has lots of snow and ice in the winter, then you have probably seen the salt spread on the road to melt the ice.
Wrapping up
That’s it really. All you need to do to store a portable basketball hoop for winter are these few steps that we covered.
We recently did an article on how to keep portable basketball hoop from falling over, so there you’ll find everything about securing it from wind (and dunking).
Don’t look for complicated solutions, don’t leave it out on the open spot unprotected, and most importantly – don’t let it freeze.
Hope you found what you were looking for. If you’re interested in anything else regarding hoops, you’ve got all the answers at improvehoops.com/hoops/.
How much antifreeze to fill in the cooling system: how much is needed
Antifreeze, or coolant, is used in the car's cooling system and allows it to function properly. The days when water was used instead are long gone, now special silicate, carboxylate or hybrid compounds are used. They do not freeze in the cold, are not consumed for a long time, and have a number of positive properties. The innovative Sintec MULTIFREEZE fluid additionally preserves the integrity of the machine systems and is compatible with most types of antifreeze.
Contents:
How it works
Any brand of fluid does not freeze due to the use of ethylene glycol, or dihydric alcohol, in the composition. In addition to it, antifreeze contains additives and additional substances that slow down corrosion and extend the life of the components of the cooling system. It is designed primarily to remove excess heat, function as a coolant and help the engine run smoothly. There are several types of liquid:
- based on silicates;
- using carboxylates;
- hybrid.
There is also antifreeze, used and invented in the Soviet Union, but it is actively abandoned in favor of more modern options. They are more reliable, less prone to wear and tear, better protect vehicle systems.
How much fluid is used in the car
How much antifreeze is needed in a particular case depends on the make and model of the car. On average, the system includes from 5 to 9liters of antifreeze, but you can see exactly how much is used in the instruction manual for the machine itself.
First of all, the type of engine is important, as well as other design features. A few examples:
- KIA Solaris uses from 5.5 to 5.8 liters, depending on which engine is installed in it: 1400 or 1600 cm 3 ;
- Renault Logan uses 5.5 to 6 liters;
- VAZ needs different volumes depending on the model and generation. Old cars (2101–2107) require more than 8 liters of fluid, newer cars, like Kalina or Grants, require an average of 7.8 liters.
Most often, the question of how much antifreeze is included in the system in general arises from car owners if it is necessary to replace the liquid or add it.
How to know when the fluid needs to be changed
Most mixtures need to be changed periodically. They have a finite service life, after which the antifreeze becomes viscous, darkens, loses its properties and the ability to remove heat from the motor. Impurities may appear in it, especially if the machine has been operated carelessly.
Such symptoms are a direct recommendation to change the refrigerant, and it is desirable to carry it out completely. In addition, the fluid must be changed if:
- there has been a recent failure that could affect the mixture;
- The engine overheats, heat is poorly removed from it.
Recommendations recommend replacing every two years or every 75,000 kilometers. Much also depends on the intensity and frequency of use of the machine.
Why you need a replacement
If you continue to drive with antifreeze that has ceased to maintain the optimum temperature in the engine, sooner or later this can lead to a breakdown. The increased temperature additionally loads the motor, and the excessive viscosity inherent in an expired fluid can increase the wear of parts. As a result, if you do not change the refrigerant in time, you can get a breakdown, which will take a long time to fix. However, there are products that can work as long as possible: high-quality antifreezes have a service life of 5 years or more, and the innovative Sintec MULTIFREEZE fluid is designed for the entire life of the car.
This development is compatible with all quality refrigerants, includes the advantages of silicate and carboxylate agents, is suitable for all car models of different years of manufacture and manufacturers.
You will be interested in: How to properly fill antifreeze into the system
How much antifreeze is needed when topping up
It is not always necessary to change the liquid completely, sometimes its partial replacement is indicated. This is due to gradual natural consumption, as well as after breakdowns that led to leakage of antifreeze. Topping up is a responsible event, the most important part of it is the selection of a suitable brand of liquid, combined with the current one, and the volume of topping up.
- How much antifreeze "fits" into the system depends on the brand. But both in the radiator itself and in the expansion tank there are marks showing the minimum and maximum allowable fluid levels.
- If the design allows coolant to be poured directly into the radiator neck, less coolant will be needed.
In the case of a tank, a little more is poured: from there, the refrigerant is distributed throughout the system. - The optimal value, if you are not sure how much antifreeze to fill in, is the average. It depends on the consumption, the characteristics of the operation of the machine and other parameters.
How much fluid to fill when replacing
A complete fluid change usually requires 5 to 9 applicationsliters of antifreeze. It is impossible to give more accurate values: a lot depends on the brand of the machine and design features. Usually, you should focus on the risks that demonstrate the optimal level of refrigerant. Before and during the replacement, you need to take into account several features:
- if you are replacing the liquid with a non-identical one or have not cleaned the cooling system for a long time, before filling it with a new one, flush it with at least 10 liters of distilled water or a special agent;
- Some car manufacturers recommend diluted rather than pure refrigerant to save money.
In this case, the liquid should be diluted exclusively with distilled water: the usual one contains many impurities that can react poorly with additives in antifreeze; - note the color and consistency of the old agent. If it contains rust or metal impurities, contact a car service as soon as possible.
How to choose. Choosing the right fluid is the main difficulty when replacing. Not all brands of antifreeze are compatible with each other; in some cases, an insoluble precipitate may form. Sintec MULTIFREEZE, an innovative tool designed for the entire life of the car and having excellent performance characteristics, will help solve this problem.
#Tips from the experts
You might also be interested
What is the difference between antifreeze colors? What is the difference between coolants?
Not many people guess, but the color of the coolant is completely unrelated to its chemical composition and performance properties.
Moreover, international standards do not contain strict regulations regarding the color of the technical fluid. Then why is antifreeze painted in different colors? Our experts gave a detailed answer in the article.
The use of antifreeze in the northern regions
In many regions of our country, the period with negative temperatures prevails over the warm season of the year. In such conditions, the operation of cars presents certain difficulties for car owners: it is necessary to carefully choose technical fluids, and in particular, antifreeze. The modern Russian auto chemical goods market is flooded with a variety of products, the motorist only needs to choose a coolant that will work effectively under heavy loads, […]
Sintec Multifreeze - one for all
Modern technology makes our lives easier. Think of mobile phones in the early 2000s: most of them had their own connectors and original chargers. But then manufacturers came to a single universal solution in the form of microUSB, which greatly facilitated the operation of smartphones.
There are similar examples in the automotive industry. Do you know how to choose the right antifreeze for topping up? Some are oriented […]
Replacement of antifreeze in Ford Focus 2
Replacement of antifreeze in Ford Focus 2
The engine of any car, including the Ford Focus 2, heats up during operation, the temperatures rise especially strongly when it is running at full power or at low temperatures. If the internal combustion engine is not cooled, then it will become hot and breakdown is inevitable. Today, special liquids are used for this. Antifreeze for Ford Focus 2 is a composition that is optimally suited for the engine of this brand and model. Anti-foam, anti-corrosion and other additives that protect the cooling system are added to it. Ford Focus 2 coolant washes the engine, taking heat into itself.
When to change antifreeze?
The replacement of the coolant is carried out according to the manufacturer's regulations, according to the results of a technical inspection, during car repairs.
But it is often advisable to fill in a new composition with such signs:
- antifreeze has become cloudy and has a residue in it;
- foam has appeared or its volume has increased;
- the liquid has become thick and jelly-like;
- the composition appeared yellow, that is, the refrigerant neutralized corrosion and lost its properties;
- the level of antifreeze has dropped noticeably;
- if you had to add refrigerant produced according to other standards.
When choosing a composition to replace antifreeze in Ford Focus 2, you need to take into account the type of car, the condition of the internal combustion engine, and driving style. Important! Refrigerants lose their effectiveness during operation. Acidity increases in them, the properties of anti-corrosion protection decrease. On average, the resource of liquids is three years or 60,000 kilometers. But the coolant must maintain a density above 1.
075 kg / cm³. On sale there are carboxylate compounds. Their resource varies from 5 to 10 years. But the expiration date of the refrigerant takes precedence over the manufacturer's recommendations.
If the engine starts to overheat, then the coolant loses its properties. This can be determined in 3 ways:
- test strip, coolant is applied to the side with the reagent, and the replacement period is set by the indicator;
- inspection: appearance of foam, structure transformation, color change, formation of suspensions;
- boiling, antifreeze is collected in a large spoon and brought to a boil, if suspension or smell of ammonia appears, the refrigerant must be replaced.
If signs are detected, it is necessary to change the coolant as quickly as possible. When trying to delay time or save money, you increase the risk of engine breakdown and repair at a cost of up to 40% of the cost of a car.
How much antifreeze should be added?
How much antifreeze is needed to replace depends on various factors.
For example, if the liquid level has decreased, but it has not lost its qualities, you just need to add it. But, if the volumes of the refrigerant have decreased due to a leak, you will have to do a complete drain, eliminate the cause, and then fill in the old and new composition (necessarily of the same standard).
How much refrigerant to fill in the Ford Focus 2 is usually indicated in the car's owner's manual. This is from 5.2 to 8.5 liters. Below is a table for model modifications.
| ICE volume | The volume of antifreeze l. |
| 1.4 petrol | 5.2 to 5.5 |
| 1.6 gasoline | 5.6 to 6 |
| 1.8 petrol | 6.5 |
| 2.0 gasoline | 6.3 |
| 2.5 petrol | 9.5 |
| 1.6 diesel | 7.5 |
1. 8 diesel | 8.1 |
| 2.0 diesel | 8.5 |
Should I flush the cooling system?
The procedure is quite simple. First you need to close the drain hole, then pour water into the expansion tank of the coolant to the level, close the lid on it. Now you need to start the car, warm up the engine completely, turn it off. Wait until it cools down and drain the flushing water. To completely flush out the old refrigerant, the procedure can be repeated. Sometimes flushing up to 5 times is required.
If the system is heavily contaminated, special formulations must be used. The procedure is similar. Instructions are always attached to the flushing agent.
Which refrigerant should I choose for the engine cooling system on the Ford Focus 2?
Note! It is necessary to immediately warn the owners of the Ford Focus 2: the use of an inappropriate composition threatens with such problems: overheating of the motor, cavitation and subsequent boiling of the coolant, the appearance of sediment, the formation of corrosion, as a harbinger of the resolution of the pump impeller, radiator contactor, thermostat and other elements.
What antifreeze to fill in Ford Focus 2? Of course, only the compositions recommended by the manufacturer:
- Concentrate 1.5l (purple) G13 VAG. The formulation is characterized by good miscibility with G12plus and G12plus products. According to user reviews, the refrigerant of this brand allows you to maintain the cooling system in working condition and optimal temperatures in it.
- GM concentrate (red) 1 l. FORD. The composition must be diluted with distilled water. It is a carboxylate liquid made by the method of organic acids.
Advantages: excellent corrosion protection, long service life.
- coolant green 1kg Miles. The composition belongs to the best antifreezes on the market. It is produced by silicate-free technology on the basis of salts of carboxylic acids. This allows it to be used in motors with copper and aluminum radiators.
- coolant 1kg. (green) Patron. PROFESSIONAL. This is a product from the new line of the manufacturer.
It is defined by the G11 and G12+ specifications. The composition is made from monoethylene glycol of the highest grade. The coolant uses a high quality additive package.
- coolant 5 l. (green) Patron. PROFESSIONAL. Similar to the previous one. Larger capacity.
- G12 red 1kg Patron. 3M. Similar to the previous one.
- G12 red 5kg Patron. Similar to the previous one.
- FORD concentrate (red) 1l. Genuine Ford refrigerant, filled in at the factory. Before pouring, dilution with distilled water is necessary.
To flush the cooling system, you can buy distilled water: "Crystallex" 1.5l or 5 liters.
Note! In order for the refrigerant to last for a long time, experts and experienced drivers do not recommend heating the internal combustion engine over 90 degrees Celsius. This is the critical operating temperature of the coolant. Additionally, there are risks of reduced engine performance and increased fuel consumption.
Recap
So, as is clear from the above, to replace the old coolant, you need to use only the original antifreeze. The second important component of a quality result is well-executed work. With your own hands it is difficult to perform the procedure at the proper level. In Yekaterinburg, we invite you to our car service, where experienced craftsmen will perform all the necessary work quickly and efficiently. The cost of replacing antifreeze in a Ford9 car service6.rf - available to a wide audience of motorists. At the request of the client, it is possible to check the machine on the stand: wheels, suspension, camber angle and other aspects.
Back to Articles
Feedback sent successfully. After checking by the moderator, it will be published
Your order has been successfully placed!
Our manager will contact you shortly to confirm the order.
You can immediately fill out an online application for repairs in our car service!
Sign up for a car service
Go to Main page
Your request has been sent successfully!
We will contact you shortly and answer all your questions
Go to Main page
Leave your contact details and we will contact you shortly
Your Name*
Telephone*
Email
Comment
By clicking on the "Submit request" button, you consent to the processing of personal data
Leave your contact details and we will contact you shortly
Your name *
Telephone*
By clicking on the "Request a call" button, you consent to the processing of personal data
Your Name*
Phone*
E-mail
By clicking on the "Request a price" button, you consent to the processing of personal data
Fill out the feedback form and we will contact you as soon as possible to confirm the appointment for repairs
Select address* Select the addressAutoservice on Cherepanova 23Autoservice on March 8 209/2
Your Name*
Telephone*
Email
Comment
By clicking on the "Sign up for a car service" button, you consent to the processing of personal data
Create a new password*
Repeat password*
Change password
Registration completed successfully!
We sent a confirmation email to example@mailto.
