Home »
Misc »
How to build an outdoor basketball court floor
How to build an outdoor basketball court floor
How to DIY Build a Basketball Court (8 Step Guide)
Inspired to build your own backyard basketball court?
If you're interested in DIY'ing a basketball court or having a local contractor install a court for you then you've come to the right place.
Last Updated 2nd of April, 2020.
1. Choose the Size and Location of Your Court
Ideally you’ll choose a location that is reasonably flat, to keep excavation needs to a minimum.
Recommended subsurface base: Concrete (100mm thick, 25MPA, Reinforced, Helictoper/smooth finish, Standard slope to allow water to drain off the slab)
We strongly recommend a concrete base for any new base being built for a MSF PRO sports court. Concrete provides by far the best longevity, performance and value over the long run and requires virtually no ongoing maintenance or repairs for many years. Other suitable bases include Pavers, Asphalt or Decking.
- Option 1: Have an elevated concrete slab & then fit your landscaping requirements around it.
- Option 2: Level the slab with the rest of your backyard. This option involves more excavation work/costs.
The size of a full size NBL court is identical to the FIBA regulation sized basketball court of 28m x 15m (420sqm), which is usually too large to fit into the average backyard. We recommend considering a half court, which can be customised to suit your space. Sizing can range from very small approx 4m x 6m (24sqm), 9m x 5m (45sqm), 10m x 7m (70sqm) to a 3X3 regulation half court of 15m x 11m (165sqm).
Precise measurements and planning are crucial in order to end up with the best result.
2. Purchase the Hoop & Sports Court Surface Tiles
The in-ground Hoop anchor kit should be installed during the concrete pour, so ensure you’ve ordered your Hoop in time to arrive before you schedule the concrete. Take note of the hoop's overhang in centimetres so you can plan accurate placement of the hoop anchor, free throw and three point lines.
Surfacing your court with a specially designed synthetic sports surface such as Australia's #1 selling, top rated MSF Pro™ will not only produce an amazing looking result, but will also provide more accurate ball bounce, sound reduction and minimises joints strain/injuries.
3. Level the Ground
Prior to concreting, the space must be dug up and levelled. If you require the concrete to be flush with the surrounding ground then you must excavate 115mm below surface level to allow for the concrete slab (100mm) and sports surface tile (15mm). If you are opting for the elevated slab then you may not need to excavate but you do need to remove any grass and level the ground.
IMPORTANT SAFETY PRECAUTION: Before you dig, call 1100 (Australia) or your local utilities to rule out the presence of buried cables including power, water, gas and phone lines. Failure to do so could result in serious or fatal injury. Dial Before You Dig is a FREE national referral service designed to assist in preventing damage and disruption to Australia’s vast infrastructure networks which provide essential services we use every day.
4. Pour a 100mm Concrete Slab
Prepare and pour a 100mm thick slab of concrete (25MPA, reinforced, standard slope, helicopter/smooth finish) matching your exact MSF PRO™ Court Design measurements. Ensure you have someone experienced with concrete slabs on hand for this step. Plan the concreting for when the weather is dry and allow for 72 hours to let the concrete set.
It's recommended to install the hoop anchor at the same time as pouring the slab to save on expenses. The recommended hole size for a hoop anchor system is approx 500mm x 500 mm and 1.2m deep. Please note: Always remember to closely follow the installation & safety instructions that come with your in-ground hoop.
Always be sure to follow the official basketball hoop installation instructions. Goalrilla in-ground hoops generally require 3-5 strong labourers with multiple ladders and power tools. Hoop installation can take up to a few hours for those inexperienced with installing. The below videos provide an example of the procedure involved for installing a popular Goalrilla in-ground basketball hoop system yourself...
Indoor and Outdoor Basketball Court Tiles & Flooring
Feeling ready to fully embrace your inner LeBron James and Stephen Curry with a new basketball court? Despite your best efforts to play like them, chances are you're not making their salaries quite yet. Luckily, you don't have to have the money of a pro NBA player to feel like one. Greatmats offers a variety of sport court tiles that look and feel as serious as you play - without installation stress or financial strain.
Creating a basketball court out of Greatmats' sport court tiles is an easy DIY project, which lets you save on steep installation prices. Further, you don't have to fret about putting money into a project you might eventually have to leave behind by moving. You can simply take your basketball court with you wherever you go.
Once you've decided on sport court tiles, you'll have to figure out which one will work best for your budget, environment and location. Here, you'll learn about the top indoor basketball flooring and outdoor basketball court tiles available.
Indoor Basketball Flooring
Whether it's for a community center, church, athletic facility or your own home, Greatmats has the way to create your ideal indoor basketball court. Greatmats offers a few different low-maintenance, high-quality indoor basketball flooring options.
Modular Sport Court Tiles - Do-It-Yourself
The first is modular sport court tiles. One of the best all-around options is Greatmats' Max Tile Raised Floor Tile. The base of the tile is made of polypropylene, while the top surface is 3 mm of commercial grade laminate vinyl available in multiple different woodgrain options. The vinyl is wear-resistant (with a wear layer .03 mm thick) and features UV protective coating, so the tile will never need refinishing. You can also easily paint basketball court lines on vinyl.
The polypropylene base features a unique, computer-designed connector system. All you have to do for installation is place the tiles on a hard surface, align the tiles' nubs with other tiles' loops and step on the top tile with your foot. With a few more steps, you'll have an entire basketball court in no time. The durability of polypropylene ensures the connectors will not degrade, even after repeated removals and installations.
Because the tiles are raised, air can flow underneath it, which prevents moisture build-up, mold and mildew. The vinyl is also non-absorbent. Thus, raised basketball flooring is an excellent option for courts in moist environments or subterranean spaces.
Similar to the Max Tile court flooring is the Basketball Court Tile Gym Floor Pro. These court tiles offer an even thicker wear layer and are designed to last for more than a decade under commercial gym flooring use.
If the vinyl surface is not for you, Greatmats also offers court tiles made of 20 mm-thick pure polypropylene. These snap-together tiles are a fun alternative to the classic wood style with a nice selection of brightly-colored tiles. They are designed to hold 20,000 lbs./square foot, which demonstrates their durability.
Modular sport court tiles come in a variety of colors and wood-grain designs. You can choose from options including red, blue, white, black, walnut, cherry, oak, and maple. We recommend underlying the sport court tiles with 3 to 6 mm of low-density rubber underlayment for added cushion, quiet and comfort.
Athletic Vinyl Padded Indoor Basketball Flooring
Another excellent indoor basketball flooring option is Greatmats' athletic vinyl padded flooring roll. The wood-grain design roll features a 2mm vinyl top layer fusion bonded to a 5 mm rubber base. There is also a high-performance urethane wear layer. The result is an attractive, high-quality wood-alternative flooring. Vinyl padded basketball flooring yields the classic wood style, but is a more economical option.
Don't mistake the practical cost for lesser quality. Rubber basketball flooring is still an extremely durable and long-lasting option. Greatmats' vinyl basketball court provides sound and shock absorption, which lessens the risks of floor impact and sound escape. Other benefits include fade resistance, low-maintenance and simple clean-ability: no polish or wax is required. Rolls are available in 4 different colors, and come in a standard 6x30 ft size.
Outdoor Basketball Court Tiles
When choosing basketball flooring for an outside court, it's important that your investment is long-lasting. That means it's necessary to use materials that will maintain their quality even when exposed to extreme weather conditions. Greatmats outdoor basketball court tiles are guaranteed to withstand the negative effects of weather while maintaining player-friendliness.
Greatmats' outdoor basketball court tiles are made from a special high-impact polypropylene copolymer. These tiles are constructed as outdoor basketball flooring that will withstand a static load of at least 16,000 pounds per square foot. In other words, these courts are extremely durable.
Further, the outdoor basketball court tiles prevent standing water with an innovative flow-through design. Water will quickly dissipate, so you don't have to worry about the negative effects of moisture build-up. Tiles are also mildew and mold resistant. You won't have to worry about temperature either, since Greatmats' sport court tiles are created with thermal expansion control.
Whatever the weather, Greatmats' sport courts remain stable and comfortable for players. The tile incorporates a leaf spring-type flex joint system, which controls give and reduces leg stress. This system also allows the tiles to conform to minor underlying surface irregularities.
Greatmats guarantees both quality and appearance. Greatmats' outdoor basketball court tiles are fully color saturated, so they will not fade over time. Plus, there are 16+ colors to choose from, so you can design your court in any way you wish.
Just like the indoor basketball flooring tiles, installing outdoor basketball court tiles is a money-saving do-it-yourself project. Installation is easy and does not have to be permanent.
Regardless of location, going with Greatmats for a basketball court will feel like a slam dunk. If you still feel unsure about what kind of flooring is best for you, Greatmats offers unbeatable warranties and customer service to help you navigate your options and ensure you get the best DIY Basketball Flooring.
For more on this topic please review our Sport Court Tiles & Flooring product page.
Construction of a turnkey basketball court|SportObject
The SportObject company offers its services in the construction of turnkey basketball courts. Trusting the construction of our company, you get a whole range of turnkey services, including design, ground work, laying the base and coating, marking and other construction work. We strictly adhere to the agreed deadlines and provide our clients with a work schedule that indicates the start and completion dates for construction.
Find out why it is safe to cooperate with us
Details
Calculation of the cost of the object
To find out the estimated cost of your object, select the parameters below or use the detailed calculator available by clicking the "Make a detailed calculation" button.
1. Coating:
Choose the type of coating for your object.
Not selectedAcrylicRubber crumbModular plasticPolyurethane
2. Destination:
Specify where your object will be used.
Not selectedFor suburban developmentsFor educational institutionsFor competitionsFor sports organizationsFor private business
3. Your object:
Specify whether your object is located: indoors, outdoors or it needs a hangar.
Not selectedOutdoor (outdoor)Indoor (indoor)To be built (prefabricated hangar)
4. Field sizes:
Select the appropriate field size from the list provided.
Not selectedCustomStandard30x18 - (playing dimensions 28x15) 34x19 - for competitions (playing dimensions 28x15)
Specify the parameters of your object in a detailed calculator and get an approximate cost of the service.
Budget savings
We help reduce your costs by up to 40% and avoid unnecessary overpayments.
3 day project
We will design and calculate the exact cost of your object in just 3 days.
5 year warranty
We give great guarantees for imported goods and materials from our warehouse.
421 590* 421590 RUB
* The price is indicated for the basic package with a coating without a base. You can also use the detailed calculator.
Implementation example
Private sector basketball court
Difficulty:
Rubber slabs for outdoor sports grounds are perhaps the most reliable and rational option of all. The coating is made of high-strength crumb rubber and a binding polymer (polyurethane adhesive).
More
Get a consultation
Order a call back and one of our managers will advise you on all your questions
You can also call
8 (495) 240-82-24
By submitting your personal data through the forms on the site, you give your consent to the processing of personal data in accordance with Federal Law No. 152-FZ "On Personal Data" dated July 27, 2006, as amended on July 1, 2017.
Stages of construction on the example of a football stadium
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed). Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc. We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base. When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds. That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed). Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc. We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base. When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds. That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
Options
How do we work?0003
We carry out construction and installation works
We hand over the finished object and provide a guarantee
Private
I am a private client
We work in all regions of the Russian Federation
We cooperate with contractors who are ready to travel to any city in Russia. We take measurements, bring materials or buy them in your city, install coatings and equipment.
We offer standard solutions
We are engaged in the construction of both standard and unique projects. We work individually with each client: we take into account your wishes, fit into the budget and comply with the agreed deadlines.
We take care of your budget
We help clients in the selection of materials, places for construction, provide detailed advice and suggest how to get a fully functional sports facility at a lower cost.
We create 3D visualization
We offer the development of a 3D model that will convey a complete vision of the concept of the future object. Also, this service will help both us and the client to eliminate the possibility of error at the design stage.
We make reconstruction and repair
We carry out all types of reconstruction works: we repair the foundation, lay the foundation, replace the coatings, install fences, roof structures, make glazing and ennoble the areas.
I am a frequent customer
Corporate
I am a corporate client
We offer additional services
We are engaged in maintenance of the facility after commissioning: we take care of the condition of sports surfaces, ennoble areas, do glazing and other general construction works.
We take on complex projects
We have enough experience and capabilities to solve the most non-standard and complex tasks. Many of our specialists took part in the preparation of sports grounds for the Olympic Games in Athens and the 2018 World Cup.
We cooperate with global companies
We maintain strong partnerships with well-known manufacturers from Europe and Asia. At the request of the customer, we supply the goods you like from abroad in the shortest possible time.
We provide detailed advice
We answer in detail all the client's questions about the project and our services. Also, we are ready to provide professional legal advice on construction issues.
We build turnkey facilities
We provide a whole range of services: designing an object, drawing up design estimates, building a foundation and base, selecting and laying coatings, erecting roofed structures, installing appropriate equipment and necessary communications.
Our clients
I am a corporate client
Acknowledgments and certificates of conformity
Company "SportObject" offers its services in the field of sports construction. We are engaged in the construction of turnkey basketball courts: we design, draw up design estimates, coordinate the construction, mount the foundation and roof structures, lay bases and coverings, perform finishing work, provide communications and deliver sports equipment. Each of the stages of work is implemented strictly according to the schedule agreed with the client, which allows us to deliver a fully finished project on time.
We value the trust of each customer and guarantee comfortable cooperation
- We travel to any place in Russia;
- We provide detailed advice on construction issues;
- We select high-quality solutions for the client's budget;
- We help with the choice of an advantageous place for construction;
- We work with complex and non-standard ideas;
- We offer creative solutions within a reasonable budget;
- We provide additional facility maintenance in other regions of Russia.
We supply basketball surfaces from world manufacturers
The dynamics of basketball matches means high speed, sudden movements and heavy loads on the joints. It is very important that the flooring of the basketball court is both wear-resistant and injury-proof at the same time. For basketball courts we offer: tennis, hard or soft-hard, modular plastic, polyurethane coating and crumb rubber coating.
Our company only works with proven materials that have passed the strictest quality control, so we offer a wide selection of outdoor basketball surfaces from domestic and foreign manufacturers, such as: ERFOLG , BERGO , Plastfacto , Conica , Novol , Aropa , CRUMB , GUMBIT 90 MASTER FIBER and many more.
In addition to the construction of basketball courts, we take care of the complete set of the object and provide it with all the necessary equipment until it is ready for operation. In accordance with the requirements of the customer, any sports equipment can be installed: backboards, rings, stands of a certain capacity, running tracks, a sector for standing long jumps and, of course, various types of fences.
We offer metal fences or safety nets at the customer's choice
- Metal 2D and 3D railings are sectional structures of increased strength with rod diameters from 4 to 6 mm, protected by a polymer and zinc coating. Unlike other fences, mesh panel fencing is maintenance-free - it does not collect dust, does not fade in the sun and does not deform under wind loads, and also does not need periodic painting
- Protective mesh made of kapron or nylon threads can have different mesh sizes: 100x100, 40x40 or 20x20. Such a fence is ideal for zoning the playing space and protecting spectators from sports equipment. The mesh does not need maintenance and is easily restored
While building new basketball courts, we also work on existing facilities that need major repairs or minor restoration. We are happy to undertake the design of a sports facility, without including construction work, and for the implementation of the facility according to an already finished project.
You can ask us a question, leaving your contact details. We will call you back shortly.
You can also call
8 (495) 240-82-24
Basketball surface | actionflooring.ru
Basketball was invented by Dr. Jace Naismith in 1891 in the USA. According to modern official rules, basketball competitions can only be held in the halls, mainly on the parquet floor. Sports parquet is the ideal flooring for basketball, volleyball, squash, dance, fitness and more. This is the highest quality, environmentally friendly, prestigious, natural and durable type of sports flooring for halls, including those intended for basketball. Reliable production and installation technologies for this basketball surface allow it to be used for at least thirty years. There are examples of parquet flooring in basketball halls that are 60-70 years old and are still played and competed on.
Parquet is considered to be the reference surface for basketball, first of all, because it provides a sufficiently high degree of ball rebound, but at the same time remains elastic (due to the lag design), comfortable and safe from injury. The natural properties of wood allow the coating to perfectly absorb sounds and impact energy, parquet systems are easy to install and repair, and they are also characterized by a low height. And, finally, sports parquet in the basketball hall, despite its stylish appearance, requires minimal maintenance and cleaning.
Wood is a rather rigid material, therefore, to provide the basketball surface with the required degree of elasticity and non-traumatic risk, it is laid on a special structure of a one- or two-lag system. The elasticity of the whole structure is regulated by means of rubber gaskets, which are installed at the intersections of the lag. Also, sports parquet can be laid on a prepared special subfloor - an elastic substrate of the desired thickness, laid on top of the waterproofing layer. Increased wear resistance of sports parquet is provided by special multi-layer coatings with various varnishes and oils. For the production of sports parquet, only hard hardwoods, such as oak, maple, ash, etc. , are used.
In the summer, basketball is often played on outdoor playgrounds with a modular sports surface. This is a wear-resistant material made of polypropylene, which perfectly withstands temperature extremes, extreme loads and at the same time is quite elastic. The trendsetter in the production of this coating is the company SnapSports . With which we maintain partnerships.
Action Floor Systems LLC primarily manufactures Hard Maple Sports Flooring. All coatings are produced using a unique environmentally friendly technology. In this way, a top-quality sports surface becomes a sustainable result.
When choosing a basketball surface, you can visit the iconic place for athletes - the Naismith Memorial Basketball Hall of Fame, where the Action Exhibition Gallery is located. It was in this hall that Dr. James Naismith organized the first basketball games. Action manufactures flooring for basketball players of all skill levels, from NBA courts to high school gyms.