Home » Misc » How to make a basketball hoop out of cardboard
How to make a basketball hoop out of cardboard
STEAM@Home: Make Your Own Basketball Hoop!
No application or registration needed.
Location
Only virtual (online or over the phone).
Find an area where you can lay out materials and do some hands-on construction.
Additional information
Materials:
A wire hanger. It cannot be a partially metal hanger made substantially of wood or plastic.
A large, flat piece of cardboard.
The tape of your choosing. Masking tape may be the easiest to work with; duct tape would certainly make the hoop durable.
Markers or paint.
Scissors.
String (optional).
Instructions:
Bend the wire hanger into a circle. You do not even have to dismantle the hanger, but just reshape it into a hoop.
Bend the hook of the hanger so that it is at a 90 degree angle with the hoop. Do not cut away the hook, as it still can be of some use.
Cut the cardboard to the size and shape of your liking. Standard high school, college, and NBA backboards are rectangular, if you are looking to replicate that appearance. Try to make sure the relative scale of the hoop and backboard seem reasonable. For comparative purposes, an NBA backboard is 6 feet wide, while the basket opening is 18 inches (1.5 feet). That means the basket width is 1/4 (or 25%) as wide.
Decorate the hoop and backboard to your liking. Traditional hoops are painted red, but you can certainly customize it to fit whatever you desire. The backboard of most high schools, colleges, and all NBA franchises are now made of transparent glass; as there is no transparent cardboard, you can really be as creative as you want.
Tape the hoop to the backboard. You can attach the hook (which you bent up earlier) to lower back side of the backboard. Make sure the rim is as close to the backboard as possible.
Attach a net to the basketball rim (optional). You can make make a net out of string, or even out of twisted tape.
Hang the completed basket to a wall or door. Masking tape will work well for this purpose, as it will not leave a sticky mess behind like duct tape would. There are two different taping methods you can employ.
This activity supports the practice of these STEAM Habits of Mind: Develop craft, engage & persist, observe, reflect, stretch & explore.
Tips for Supporting Your Children's Learning
Get your child actively involved in their own learning and having their questions drive the learning. Let them observe and figure out, and try to hold back from answering questions for them. Instead, try to ask: What do we know? What else can we find out? How might we figure that out? Don't be afraid to ask your child questions. Also, don't be afraid to say "I don't know--let's find out together!" as a way to respond to their questions. Here's an article to help you support this kind of learning: Of the Value of Saying I Don’t Know
Want to learn more about making your own sports equipment?
Science Club for Girls at Home - Make you own sports equipment challenge
Instructables - MYO Basketball hoops
More hands on activities and learning opportunities:
Homecourt - basketball skill building app
Cambridge Public Schools Virtual Enrichment Recommendations
Exploratorium - Sports Science
Design Squad - Sports design challenges
Parkour Generations - Classes
Department of Human Services Sports Leagues
More STEAM@Home suggestions!
MIT Full STEAM Ahead
STEAM Habits of Mind - observe, reflect, engage & persist, stretch & explore, imagine, develop craft
How To Make A Basketball Court Out Of Cardboard?
How to make a basketball court out of cardboard?
Step 1: Take a 60cm * 30cm Piece of Cardboard and Make the Markings As Shown.
Step 2: Take Cardboard Pieces As Shown and Follow the Instructions in the Following Image.
Step 3: Make Basketballs Using Ping Pong Balls and the Black Marker.
Step 4: Take a 50 Cm High Cardboard Piece With a Round Top and Width 30 Cm.
Likewise, how do you make a mini basketball court out of cardboard?
Similarly, how do you make a basketball court at home?
Considering this, how do you make a basketball game out of paper?
Moreover, how do you make a 2 player board game for basketball?
Contents
How do you make a basketball ball?
How do you make a homemade hoop?
How do you make a basketball backboard?
How do you make a basketball pole?
How do you build a backyard basketball court?
How do you build a basketball court without concrete?
Can I play basketball on grass?
How do you make a mini basketball hoop out of paper?
How do you make an inflatable ball out of paper?
How do you make a origami ball?
How do you make a basketball ball?
How do you make a homemade hoop?
Bend the wire hanger into a circle.
Bend the hook of the hanger so that it is at a 90 degree angle with the hoop.
Cut the cardboard to the size and shape of your liking.
Decorate the hoop and backboard to your liking.
Tape the hoop to the backboard.
Attach a net to the basketball rim (optional).
How do you make a basketball backboard?
Cut plywood panels identically to size for the backboard.
Cut (1) 2 x 8 piece so the length is the same as the width of the backboard.
Glue, clamp, and screw the plywood panels together using the 1 and 1/4” screws.
Sand the edges of the backboard so both panels are smooth and continuous.
How do you make a basketball pole?
How do you build a backyard basketball court?
How do you build a basketball court without concrete?
Can I play basketball on grass?
In my opinion, this isn’t a feasible idea since grass (or dirt for that matter) isn’t dense enough for dribbling the basketball (which is essential to the game). Your kids just won’t get the same bounce as a court made with concrete or another foundation as mentioned earlier.
How do you make a mini basketball hoop out of paper?
How do you make an inflatable ball out of paper?
Fold the paper in half downwards to make a rectangle.
Fold in half again.
Open the front half of the paper, swinging the flap out and folding it down to create a triangle.
Flip over and repeat step.
Fold the corners up to meet at the tip.
Fold the corners in to meet at the center.
How do you make a origami ball?
Basketball hoop - how to make a stand with a backboard with your own hands
Love basketball and want to make a hoop? I wanted to make it myself, not buy it, and I ended up making it. It's pretty cheap, especially if you have some of the stuff you need to assemble.
Let's start assembling the basketball hoop with our own hands.
Step 1: Shape the Ring
The first thing you will need is a ring, I made it with 12mm rod, but it doesn't have to be that size. The standard diameter of a basketball hoop is 450 mm.
To make it flat you need something to wrap it around, this thing should be about 400mm in diameter.
I found an old car rim of the right size, you will need to clamp it to the table with a clamp using a piece of wood.
As shown in photo 2, place another clamp a little further from the first with a rod between them.
As shown in photo 3, slowly wrap the rod around the disk, once you wrap the rod and its edges overlap, cut off the straight ends.
Use a clamp to press the ends together, then weld them together.
To complete this part, place the ring on the ground and straighten out all the curves.
Step 2: Frame
Bend a piece of flat metal, mine was 4mm thick.
Weld it to a flat point in the ring.
Cut two rods 320 mm long.
Weld them as shown in the photo.
Drill four holes to match your existing bolts.
If you need a netball ring, you can simply attach it to the pole and skip the rest of the steps.
Step 3: Mesh Staples (Optional)
Show 7 More Images
Do this step if you need mesh. If you need a network, you will have to buy it. This step is not as difficult as it seems.
cut 12 pieces of wire 90 mm long (I would recommend making a few spare parts, as they are easy to ruin. )
bend them in the middle (it doesn't matter if the tips are the same length)
clamp the wire in a vise with a steel rod at one end
bend wire over rod
repeat this with all parts of
retighten the wire wrapped around the rod (see photo)
bend it
repeat with all parts
retighten the wire wrapped around the rod
bend it (at this point you can't just remove the wire from the rod - you will need to slide it to one of its edges and remove it from the edge)
repeat with all parts of
divide into 12 pieces and weld on the brackets
Step 4: Backboard
Cut the board to size. My board does not fit the full size of basketball boards. (the second picture shows the dimensions of a standard shield).
My measurements are 1100mm wide, 700mm high and 25mm thick. (You don't have to be that size.)
Step 5: Paint the Shield
Once you've drawn all the lines on the shield, lay masking tape over them. If you try, everything will look neat.
If you are using MDF, you will need to take care to protect the edges from moisture (as shown in photo 2).
Carefully paint over the areas around the masking tape.
Remove masking tape after enough coats of paint have been applied and the board looks complete.
Step 6: Paint the ring
First you need to sand the metal. I used a grinding disc on a grinder.
The ring must not be black or white, it must stand out from the shield. Usually the ring is painted orange or red.
The easiest way to paint inventory is from a can.
Step 7: Assemble
Put it all together. Screw the ring to the shield, hang a net on the ring.
Step 8: Installation
DIY Basketball Post is great to mount on a garage or house wall, but if you want to mount it on a pole, you can create one too.
I installed my ring in the yard using heavy duty wood screws.
A standard basketball hoop must be placed 3 meters from the ground.
I am not responsible for any damage you cause to yourself or your property - you make your own ring.
Successful throws!
DIY basketball hoop
DIY
Reading 2 min Views 5.6k.
Basketball is a sport that is popular not only in America but also in Russia. Many fathers seek to build a playground for their children in the yard. What are the requirements to follow when arranging a basketball hoop.
Shield and ring standards:
Height 105 cm;
Width 180 cm;
Square in the center of the shield - height 45 cm, width 59 cm;
Indent from the edge of the shield to the red square - 15 cm;
Ring diameter -45 cm;
Mesh for a ring 45 cm long;
The ring is attached at a distance of 15 cm from the shield;
The shield itself is raised to a height of 3. 05 meters.
Contents
Required materials for ring and shield
Making the backboard
Making the hoop
Fixing the structure
Required materials for the hoop and backboard
A basketball circle can be made from plastic pipe, metal rod or other suitable materials. Also, the ring needs a mesh, which is made of lace, rope, braid or chain.
The shield is made of fiberboard, MDF, multilayer plywood, high-quality and thick organic glass, plastic. You also need fasteners and red or black paint for marking, white for the base.
Weather conditions must be taken into account when choosing the material for the shield. The location for the basketball court should be comfortable and allow the hoop to be hung at the desired height.
Making the shield
Steps:
With a pencil, draw the lines along which the blank will be cut.
Cut out the shield with a jigsaw.
Paint white.
In the center, draw with black or red lines a rectangle for aiming before throwing. The base of the target must be at the top edge of the ring.
The stripes of the rectangle must be 5 cm wide.
You also need to circle the outer edge of the shield.
Making a ring
Steps:
Choose a pipe or twig 45 centimeters long with a little margin. Using the formula, calculate the exact length:
D(ex.). \u003d D (o) * Pi;
L(pr.) = 45*3.14=141.3 cm.
Take a length of approx.
Bend the ring on the round template, bolt the remainder to the shield.
Net can be made from a metal chain or rope.
On the twig you need to make ears for the net.
Take 20 m of rope, cut it to the number of eyes, tie it to the ring. Perpendicular to the sea knot, tie all the pieces. Should be 4-5 rows.
To prevent the ends of the mesh from fluffing, you need to tar them with fire.
Here's an article to help you support this kind of learning: Of the Value of Saying I Don’t Know
) 
If you try, everything will look neat. 
05 meters. 
:no_upscale()/cdn.vox-cdn.com/uploads/chorus_asset/file/13128999/KELDON_JOHNSON_MBB2018_01_CW_600x900.jpg)
