Home »
Misc »
How to make an outdoor basketball court floor
How to make an outdoor basketball court floor
How to DIY Build a Basketball Court (8 Step Guide)
Inspired to build your own backyard basketball court?
If you're interested in DIY'ing a basketball court or having a local contractor install a court for you then you've come to the right place.
Last Updated 2nd of April, 2020.
1. Choose the Size and Location of Your Court
Ideally you’ll choose a location that is reasonably flat, to keep excavation needs to a minimum.
Recommended subsurface base: Concrete (100mm thick, 25MPA, Reinforced, Helictoper/smooth finish, Standard slope to allow water to drain off the slab)
We strongly recommend a concrete base for any new base being built for a MSF PRO sports court. Concrete provides by far the best longevity, performance and value over the long run and requires virtually no ongoing maintenance or repairs for many years. Other suitable bases include Pavers, Asphalt or Decking.![]()
- Option 1: Have an elevated concrete slab & then fit your landscaping requirements around it.
- Option 2: Level the slab with the rest of your backyard. This option involves more excavation work/costs.
The size of a full size NBL court is identical to the FIBA regulation sized basketball court of 28m x 15m (420sqm), which is usually too large to fit into the average backyard. We recommend considering a half court, which can be customised to suit your space. Sizing can range from very small approx 4m x 6m (24sqm), 9m x 5m (45sqm), 10m x 7m (70sqm) to a 3X3 regulation half court of 15m x 11m (165sqm).
Precise measurements and planning are crucial in order to end up with the best result.
2. Purchase the Hoop & Sports Court Surface Tiles
The in-ground Hoop anchor kit should be installed during the concrete pour, so ensure you’ve ordered your Hoop in time to arrive before you schedule the concrete. Take note of the hoop's overhang in centimetres so you can plan accurate placement of the hoop anchor, free throw and three point lines.
Surfacing your court with a specially designed synthetic sports surface such as Australia's #1 selling, top rated MSF Pro™ will not only produce an amazing looking result, but will also provide more accurate ball bounce, sound reduction and minimises joints strain/injuries.
3. Level the Ground
Prior to concreting, the space must be dug up and levelled. If you require the concrete to be flush with the surrounding ground then you must excavate 115mm below surface level to allow for the concrete slab (100mm) and sports surface tile (15mm). If you are opting for the elevated slab then you may not need to excavate but you do need to remove any grass and level the ground.
IMPORTANT SAFETY PRECAUTION: Before you dig, call 1100 (Australia) or your local utilities to rule out the presence of buried cables including power, water, gas and phone lines. Failure to do so could result in serious or fatal injury. Dial Before You Dig is a FREE national referral service designed to assist in preventing damage and disruption to Australia’s vast infrastructure networks which provide essential services we use every day.
4. Pour a 100mm Concrete Slab
Prepare and pour a 100mm thick slab of concrete (25MPA, reinforced, standard slope, helicopter/smooth finish) matching your exact MSF PRO™ Court Design measurements. Ensure you have someone experienced with concrete slabs on hand for this step. Plan the concreting for when the weather is dry and allow for 72 hours to let the concrete set.
It's recommended to install the hoop anchor at the same time as pouring the slab to save on expenses. The recommended hole size for a hoop anchor system is approx 500mm x 500 mm and 1.2m deep. Please note: Always remember to closely follow the installation & safety instructions that come with your in-ground hoop.
Always be sure to follow the official basketball hoop installation instructions. Goalrilla in-ground hoops generally require 3-5 strong labourers with multiple ladders and power tools. Hoop installation can take up to a few hours for those inexperienced with installing.
The below videos provide an example of the procedure involved for installing a popular Goalrilla in-ground basketball hoop system yourself...
Indoor and Outdoor Basketball Court Tiles & Flooring
Feeling ready to fully embrace your inner LeBron James and Stephen Curry with a new basketball court? Despite your best efforts to play like them, chances are you're not making their salaries quite yet. Luckily, you don't have to have the money of a pro NBA player to feel like one. Greatmats offers a variety of sport court tiles that look and feel as serious as you play - without installation stress or financial strain.
Creating a basketball court out of Greatmats' sport court tiles is an easy DIY project, which lets you save on steep installation prices. Further, you don't have to fret about putting money into a project you might eventually have to leave behind by moving. You can simply take your basketball court with you wherever you go.
Once you've decided on sport court tiles, you'll have to figure out which one will work best for your budget, environment and location. Here, you'll learn about the top indoor basketball flooring and outdoor basketball court tiles available.
Indoor Basketball Flooring
Whether it's for a community center, church, athletic facility or your own home, Greatmats has the way to create your ideal indoor basketball court. Greatmats offers a few different low-maintenance, high-quality indoor basketball flooring options.
Modular Sport Court Tiles - Do-It-Yourself
The first is modular sport court tiles. One of the best all-around options is Greatmats' Max Tile Raised Floor Tile. The base of the tile is made of polypropylene, while the top surface is 3 mm of commercial grade laminate vinyl available in multiple different woodgrain options. The vinyl is wear-resistant (with a wear layer .03 mm thick) and features UV protective coating, so the tile will never need refinishing.
You can also easily paint basketball court lines on vinyl.
The polypropylene base features a unique, computer-designed connector system. All you have to do for installation is place the tiles on a hard surface, align the tiles' nubs with other tiles' loops and step on the top tile with your foot. With a few more steps, you'll have an entire basketball court in no time. The durability of polypropylene ensures the connectors will not degrade, even after repeated removals and installations.
Because the tiles are raised, air can flow underneath it, which prevents moisture build-up, mold and mildew. The vinyl is also non-absorbent. Thus, raised basketball flooring is an excellent option for courts in moist environments or subterranean spaces.
Similar to the Max Tile court flooring is the Basketball Court Tile Gym Floor Pro. These court tiles offer an even thicker wear layer and are designed to last for more than a decade under commercial gym flooring use.
If the vinyl surface is not for you, Greatmats also offers court tiles made of 20 mm-thick pure polypropylene.
These snap-together tiles are a fun alternative to the classic wood style with a nice selection of brightly-colored tiles. They are designed to hold 20,000 lbs./square foot, which demonstrates their durability.
Modular sport court tiles come in a variety of colors and wood-grain designs. You can choose from options including red, blue, white, black, walnut, cherry, oak, and maple. We recommend underlying the sport court tiles with 3 to 6 mm of low-density rubber underlayment for added cushion, quiet and comfort.
Athletic Vinyl Padded Indoor Basketball Flooring
Another excellent indoor basketball flooring option is Greatmats' athletic vinyl padded flooring roll. The wood-grain design roll features a 2mm vinyl top layer fusion bonded to a 5 mm rubber base. There is also a high-performance urethane wear layer. The result is an attractive, high-quality wood-alternative flooring. Vinyl padded basketball flooring yields the classic wood style, but is a more economical option.
Don't mistake the practical cost for lesser quality. Rubber basketball flooring is still an extremely durable and long-lasting option. Greatmats' vinyl basketball court provides sound and shock absorption, which lessens the risks of floor impact and sound escape. Other benefits include fade resistance, low-maintenance and simple clean-ability: no polish or wax is required. Rolls are available in 4 different colors, and come in a standard 6x30 ft size.
Outdoor Basketball Court Tiles
When choosing basketball flooring for an outside court, it's important that your investment is long-lasting. That means it's necessary to use materials that will maintain their quality even when exposed to extreme weather conditions. Greatmats outdoor basketball court tiles are guaranteed to withstand the negative effects of weather while maintaining player-friendliness.
Greatmats' outdoor basketball court tiles are made from a special high-impact polypropylene copolymer.
These tiles are constructed as outdoor basketball flooring that will withstand a static load of at least 16,000 pounds per square foot. In other words, these courts are extremely durable.
Further, the outdoor basketball court tiles prevent standing water with an innovative flow-through design. Water will quickly dissipate, so you don't have to worry about the negative effects of moisture build-up. Tiles are also mildew and mold resistant. You won't have to worry about temperature either, since Greatmats' sport court tiles are created with thermal expansion control.
Whatever the weather, Greatmats' sport courts remain stable and comfortable for players. The tile incorporates a leaf spring-type flex joint system, which controls give and reduces leg stress. This system also allows the tiles to conform to minor underlying surface irregularities.
Greatmats guarantees both quality and appearance. Greatmats' outdoor basketball court tiles are fully color saturated, so they will not fade over time.
Plus, there are 16+ colors to choose from, so you can design your court in any way you wish.
Just like the indoor basketball flooring tiles, installing outdoor basketball court tiles is a money-saving do-it-yourself project. Installation is easy and does not have to be permanent.
Regardless of location, going with Greatmats for a basketball court will feel like a slam dunk. If you still feel unsure about what kind of flooring is best for you, Greatmats offers unbeatable warranties and customer service to help you navigate your options and ensure you get the best DIY Basketball Flooring.
For more on this topic please review our Sport Court Tiles & Flooring product page.
Basketball surface | actionflooring.ru
Basketball was invented by Dr. Jace Naismith in 1891 in the USA. According to modern official rules, basketball competitions can only be held in the halls, mainly on the parquet floor. Sports parquet is the ideal flooring for basketball, volleyball, squash, dance, fitness and more.
This is the highest quality, environmentally friendly, prestigious, natural and durable type of sports flooring for halls, including those intended for basketball. Reliable production and installation technologies for this basketball surface allow it to be used for at least thirty years. There are examples of parquet flooring in basketball halls that are 60-70 years old and are still played and competed on.
Parquet is considered to be the reference surface for basketball, first of all, because it provides a sufficiently high degree of ball rebound, but at the same time remains elastic (due to the lag design), comfortable and safe from injury. The natural properties of wood allow the coating to perfectly absorb sounds and impact energy, parquet systems are easy to install and repair, and they are also characterized by a low height. And, finally, sports parquet in the basketball hall, despite its stylish appearance, requires minimal maintenance and cleaning.
Wood is a rather rigid material, therefore, to provide the basketball surface with the required degree of elasticity and non-traumatic risk, it is laid on a special structure of a one- or two-lag system.
The elasticity of the whole structure is regulated by means of rubber gaskets, which are installed at the intersections of the lag. Also, sports parquet can be laid on a prepared special subfloor - an elastic substrate of the desired thickness, laid on top of the waterproofing layer. Increased wear resistance of sports parquet is provided by special multi-layer coatings with various varnishes and oils. For the production of sports parquet, only hard hardwoods, such as oak, maple, ash, etc., are used.
In summer, basketball is often played on outdoor playgrounds with modular sports surfaces. This is a wear-resistant material made of polypropylene, which perfectly withstands temperature extremes, extreme loads and at the same time is quite elastic. The trendsetter in the production of this coating is the company SnapSports . With which we maintain partnerships.
Action Floor Systems LLC primarily manufactures Hard Maple Sports Flooring.
All coatings are produced using a unique environmentally friendly technology. In this way, a top-quality sports surface becomes a sustainable result.
When choosing a basketball surface, you can visit the iconic place for athletes - the Naismith Memorial Basketball Hall of Fame, home to the Action Exhibition Gallery. It was in this hall that Dr. James Naismith organized the first basketball games. Action manufactures flooring for basketball players of all skill levels, from NBA courts to high school gyms.
Choose from over four dozen samples. These samples of basketball flooring can be tested in action, to conduct a "test drive" of the sports floor.
Rubber in the structure of the cover to rob it with supra-spinal and mіtsnim. Under the cover of the gum's cryhti, you can see the grandeur of the vanity and strike at the very diverse minds, not falling under any deformation.
Guaranteed cover is not broken, not torn, volody by elastic authorities. Polyurethane, creaking to the warehouse, ensures high adhesion, so the coating from the gum coating is practically laid on a hard surface - concrete, asphalt, metal, wood.
When tsimu vodokremiti pokrittya vіd osnovi vkrai folded.
The material does not avenge organic retailers.
Available:
-
- Big lanes
- Tennis courts
- Vidkritі igroі dityachі maidanchiki
- Pokrittya near the pool
- Pishohidni zones, paths
- Paving for the cottage or house
- Cover for shelter, in which the creatures settle down
Progress:
- High quality and superior longevity of the coating from the humous crackle of the special technology and components do not tear, do not break.
- Width of sticks and seams, like pododiyuyut unhandedness (you can stumble about them, they clog mud and drank).
- Highly aesthetic - looks nice and original.
- Easy watcher - cover, which is easy to sweep with a jet of splendid water, with which all the dirt vibrates under the pressure of the porous surface.
- The cover does not affect the application of any special protections.
- Doesn't shrink - after the installation is filled with the same size and volume.
- Do not use cigarettes - the surface is covered with neushkodzhenoy.
- High springiness, which ensures comfort when walking and running, and when falling, it helps to hit.
- Cleaning noise.
- Good resistance to splashing with chemical preparations (machine oil, miyuchi sobi, gasoline), does not fail with short-hour splashing of retailers, diluted acids and meadows.
- The anti-static authorities of the cover allow you not to be afraid of the smart people's discharges.
- Non-slippery, short surface - yakіst, domineering coatings on the basis of humic coating.
- Ease of repair - if it is necessary, you can easily see and replace the car with a new one, without changing all the covers and not being afraid of causing problems with the stick.
- Environmental friendliness - longevity and high endurance allow less consumption of natural resources and significantly reduce the number of inputs.
