Home » Misc » How to build a concrete basketball court
How to build a concrete basketball court
How to DIY Build a Basketball Court (8 Step Guide)
Inspired to build your own backyard basketball court?
If you're interested in DIY'ing a basketball court or having a local contractor install a court for you then you've come to the right place.
Last Updated 2nd of April, 2020.
1. Choose the Size and Location of Your Court
Ideally you’ll choose a location that is reasonably flat, to keep excavation needs to a minimum.
Recommended subsurface base: Concrete (100mm thick, 25MPA, Reinforced, Helictoper/smooth finish, Standard slope to allow water to drain off the slab)
We strongly recommend a concrete base for any new base being built for a MSF PRO sports court. Concrete provides by far the best longevity, performance and value over the long run and requires virtually no ongoing maintenance or repairs for many years. Other suitable bases include Pavers, Asphalt or Decking.
Option 1: Have an elevated concrete slab & then fit your landscaping requirements around it.
Option 2: Level the slab with the rest of your backyard. This option involves more excavation work/costs.
The size of a full size NBL court is identical to the FIBA regulation sized basketball court of 28m x 15m (420sqm), which is usually too large to fit into the average backyard. We recommend considering a half court, which can be customised to suit your space. Sizing can range from very small approx 4m x 6m (24sqm), 9m x 5m (45sqm), 10m x 7m (70sqm) to a 3X3 regulation half court of 15m x 11m (165sqm).
Precise measurements and planning are crucial in order to end up with the best result.
2. Purchase the Hoop & Sports Court Surface Tiles
The in-ground Hoop anchor kit should be installed during the concrete pour, so ensure you’ve ordered your Hoop in time to arrive before you schedule the concrete. Take note of the hoop's overhang in centimetres so you can plan accurate placement of the hoop anchor, free throw and three point lines.
Surfacing your court with a specially designed synthetic sports surface such as Australia's #1 selling, top rated MSF Pro™ will not only produce an amazing looking result, but will also provide more accurate ball bounce, sound reduction and minimises joints strain/injuries.
3. Level the Ground
Prior to concreting, the space must be dug up and levelled. If you require the concrete to be flush with the surrounding ground then you must excavate 115mm below surface level to allow for the concrete slab (100mm) and sports surface tile (15mm). If you are opting for the elevated slab then you may not need to excavate but you do need to remove any grass and level the ground.
IMPORTANT SAFETY PRECAUTION:Before you dig, call 1100 (Australia) or your local utilities to rule out the presence of buried cables including power, water, gas and phone lines. Failure to do so could result in serious or fatal injury. Dial Before You Dig is a FREE national referral service designed to assist in preventing damage and disruption to Australia’s vast infrastructure networks which provide essential services we use every day.
4. Pour a 100mm Concrete Slab
Prepare and pour a 100mm thick slab of concrete (25MPA, reinforced, standard slope, helicopter/smooth finish) matching your exact MSF PRO™ Court Design measurements. Ensure you have someone experienced with concrete slabs on hand for this step. Plan the concreting for when the weather is dry and allow for 72 hours to let the concrete set.
It's recommended to install the hoop anchor at the same time as pouring the slab to save on expenses. The recommended hole size for a hoop anchor system is approx 500mm x 500 mm and 1.2m deep. Please note: Always remember to closely follow the installation & safety instructions that come with your in-ground hoop.
Always be sure to follow the official basketball hoop installation instructions. Goalrilla in-ground hoops generally require 3-5 strong labourers with multiple ladders and power tools. Hoop installation can take up to a few hours for those inexperienced with installing. The below videos provide an example of the procedure involved for installing a popular Goalrilla in-ground basketball hoop system yourself...
How To Build A Concrete Basketball Court? [5 Steps] – FitSeer.com
How far is the nearest basketball court to your home? It could be as close as your backyard! If you are tired of driving to the nearest court, we've researched how to build a concrete basketball court to provide you with step-by-step instructions.
To build a concrete basketball court, follow these steps:
Evaluate the size of your backyard.
Determine if the backyard will need inspection before laying the base.
Hire laborers to pour the concrete.
Wait for the curing process to be completed.
Play ball!
The idea of playing basketball in the comfort of your backyard is exciting, but you first have to understand how to build a concrete basketball court. Please keep reading because we have outlined how to do each step for this project from start to finish.
When you buy through links on Fitseer.com, we may earn an affiliate commission.
How To Build A Concrete Basketball Court
Evaluate the Size of Your Backyard
Based on the space available in your yard, you can determine what size court you can build. To evaluate the size, consider using a measuring wheel that makes measuring distance easy. Measuring wheels make outdoor projects more convenient by measuring the boundary lines of your property.
Click here to see on Amazon.
Determine if the Backyard Needs Inspection Before Building
Depending on local building codes for your area and the make-up of your backyard, it might need an inspection before building. You'll want to obtain any necessary permits before you start digging up that lush lawn. Also, inspect the area to be sure you do not have below-ground plumbing, tree roots, or any hazards that potentially can be damaged or cause damage to a concrete court.
Select the Builders
Considering that you are not a construction expert, the next step would be to find builders that have experience laying concrete. There are plenty of local professional builders and contractors willing to give great prices to lay concrete with a 4-inch pad and incorporate steel reinforced rebar and saws to cut expansion joints. It is always a great idea to gather estimates from each company to compare prices.
What Is A Good Size for A Backyard Basketball Court?
Basketball courts require a large area for distant running up and down the court away from an opponent. The length from the hoop can result in players having to shoot more challenging shots. Having too short of a court can eliminate the competitiveness of the game if the players are consistently worrying about stepping out of bounds.
Approximating the size of a basketball court can be tricky. The size of a professional basketball court measures 94 feet long by 50 feet wide. This significant length may not be necessary for friendly games in the backyard. You and your friends may feel overwhelmed by the size and tire quickly.
We will also assume that your backyard is not the same size as a college stadium, so there are other court sizes to consider. For instance, a highschool court measures around 84 feet long by 50 feet wide. Considering a high school basketball court size is reasonable because it does not take away from the game itself. It allows for a proper game without calling in professional players or skills.
What Is A Half-Size Basketball Court?
If your backyard is not quite large enough to host a high school-sized basketball court, there is no need to panic. A full-sized court is great for full team games. However, if using a backyard court for one on one or three on three games, then a half-court may be ideal. Half-courts are legitimately half of a full basketball court in length but not in width. The dimensions for a half-basketball court are 42 feet long by 50 feet wide. Half-court is a great option for those focused on shooting hoops rather than running the full court.
Is Concrete Or Asphalt Better For A Basketball Court?
Is it generally hot or cold where you live? Temperature matters due to the materials filling in the base of the court. The court will need to be filled in by concrete or asphalt, and both will play a role in the game's feeling of temperature.
Concrete is considered ideal for basketball courts because it acts as a permanent structure with minimal maintenance once installed properly. Additionally, light-colored concrete absorbs less heat than black asphalt, which means that the light-colored concrete would be less hot to play on. Asphalt is a reasonable option for the base of the court. However, consider the heat absorbed by asphalt during the summer months before starting your project.
What Kind Of Concrete Is Best For Basketball Courts?
If you are looking for longevity and very little maintenance of the basketball court, concrete is the best option. There is a standard pour of concrete used for basketball courts, a 100mm (or 4" thick) concrete slab using 3500 PSI concrete, and 1/2″ rebar for reinforcements. This pour-thickness and type of concrete are essential to the plan because both are typically done professionally. The concrete is meant to set and dry for about 72 hours.
How Much Does It Cost To Pour A Concrete Basketball Court?
Now that you know the details of how to install a basketball court, and what size court you'd prefer, let's take a look at the approximate cost. It is always best to consider local state and building codes before starting the build.
Concrete Pouring Cost
For the standard choice of poured concrete, the prices range from $1.25 to $1.75 per square foot for materials and $2.50 to $8 per square foot for installation. This ends up totaling anywhere between $15,000 to $45,000 for a full-size court and $3,500 to $9,000 for a half-court. For an alternative poured concrete, the prices range from $8 to $20 per square foot for materials and labor.
Asphalt Pouring Cost
For the standard choice of poured asphalt, the prices range from $3 to $4 per square foot for materials. This ends up totaling between $14,000 to $18,000 for a full-size court and $7,000 to $9,000 for a half-court. The prices could increase if there are drainage issues that need to address before installation can begin.
How Long Does It Take To Build A Backyard Basketball Court?
Building a standard court can take anywhere between two and four weeks. Timing ultimately depends on the base material chosen. For a concrete base, the project takes closer to four weeks at a minimum. For an asphalt base, potentially double the time due to the two weeks are set aside for the curing process before surfacing the court. Even so, a month or two is not a long wait to have the convenience of a basketball court in your backyard!
Conclusion
So there you have it! You now understand the steps necessary to take to build a basketball court in your backyard. Take the time to consider which size would be best for your home by evaluating your skills as a player and measuring the area dedicated to the court. Then begin to budget the cost of materials and plan ahead for the time necessary to set aside for the project. All in all, it is doable with this information in mind. And the payoff will be worthwhile to have some games played in the comfort of your own backyard.
Construction of a turnkey basketball court|SportObject
The SportObject company offers its services in the construction of turnkey basketball courts. Trusting the construction of our company, you get a whole range of turnkey services, including design, ground work, laying the base and coating, marking and other construction work. We strictly adhere to the agreed deadlines and provide our clients with a work schedule that indicates the start and completion dates for construction.
Find out why it is safe to cooperate with us
Details
Calculation of the cost of the object
To find out the estimated cost of your object, select the options below or use the detailed calculator available by clicking the "Make a detailed calculation" button.
1. Coating:
Choose the type of coating for your object.
Not selectedAcrylicRubber crumbModular plasticPolyurethane
2. Destination:
Specify where your object will be used.
Not selectedFor suburban developmentsFor educational institutionsFor competitionsFor sports organizationsFor private business
3. Your object:
Specify whether your object is located: indoors, outdoors or it needs a hangar.
Not selectedOutdoor (outdoor)Indoor (indoor)To be built (prefabricated hangar)
4. Field sizes:
Select the appropriate field size from the list provided.
Not selectedCustomStandard30x18 - (playing dimensions 28x15) 34x19 - for competitions (playing dimensions 28x15)
Specify the parameters of your object in a detailed calculator and get an approximate cost of the service.
Budget savings
We help reduce your costs by up to 40% and avoid unnecessary overpayments.
3 day project
We will design and calculate the exact cost of your object in just 3 days.
5 year warranty
We give great guarantees for imported goods and materials from our warehouse.
421 590* 421590 RUB
* The price is indicated for the basic package with a coating without a base. You can also use the detailed calculator.
Implementation example
Private sector basketball court
Difficulty:
Rubber slabs for outdoor sports grounds are perhaps the most reliable and rational option of all. The coating is made of high-strength crumb rubber and a binding polymer (polyurethane adhesive).
More
Get a consultation
Order a call back and one of our managers will advise you on all your questions
You can also call 8 (495) 240-82-24
By submitting your personal data through the forms on the site, you give your consent to the processing of personal data in accordance with Federal Law No. 152-FZ "On Personal Data" dated July 27, 2006, as amended on July 1, 2017.
Stages of construction on the example of a football stadium
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed). Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc. We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base. When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds. That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
The thickness of the foundation pit and the amount of materials that are needed for your foundation, we select depending on the size of the field. We select drainage and other systems based on the regional location (how much precipitation is in your region, what kind of drainage is needed). Additionally, we equip drainage wells, or divert them to the drainage system. Field slopes of several different types depending on site operating conditions.
Preparing the excavation, sand bed, drainage system
The quality of a football field is more than half dependent on the quality of the base! Our base is a monolithic solid single layer, which over the years does not form any fractures, the soil does not go anywhere and remains flat throughout the entire period of operation. Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense!
Sequential compaction of base layers
We carry out all types of additional improvement works: we can install a fence for you, pave an asphalt path to something, level the territory, paint walls, curbs, etc. We will perform all the required related work!
Installation of the curbstone
The laying of artificial grass itself is as important as the preparation of the base. When laying the field, an important aspect is gluing the rolls and cutting the markings. Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly.
Laying the grass on the prepared base, gluing it and cutting the markings
Be sure to remember: the gate is installed with a safety requirement so that it does not turn over. Therefore, this aspect is given special importance. In this regard, the gate is either concreted or attached to an accompanying fence.
Installation of the goal
The backfilling of a football field determines a large part of the playing characteristics. Backfilling is a responsible job, because the presence or absence of drops and bumps, which will eventually be felt during the game, depends on the uniform distribution of sand and crumb rubber on sports grounds. That is, there should be both a flat base and a high-quality pile with an even distribution of backfill under it.
Raising grass, distributing sand and crumb rubber across the field
We cooperate with the largest manufacturers of stands, fences and other sports equipment in the Russian Federation. Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot.
Installation of additional equipment (treadmills, jumping pits, safety fences, grandstands)
You can also be sure that we will carry out all the necessary arrangements for their improvement on the site and the adjacent territory.
Landscaping
Options
How do we work?0003
We carry out construction and installation works
We hand over the finished object and provide a guarantee
Private
I am a private client
We work in all regions of the Russian Federation
We cooperate with contractors who are ready to travel to any city in Russia. We take measurements, bring materials or buy them in your city, install coatings and equipment.
We offer standard solutions
We are engaged in the construction of both standard and unique projects. We work individually with each client: we take into account your wishes, fit into the budget and comply with the agreed deadlines.
We take care of your budget
We help clients in the selection of materials, places for construction, provide detailed advice and suggest how to get a fully functional sports facility at a lower cost.
We create 3D visualization
We offer the development of a 3D model that will convey a complete vision of the concept of the future object. Also, this service will help both us and the client to eliminate the possibility of error at the design stage.
We make reconstruction and repair
We carry out all types of reconstruction works: we repair the foundation, lay the foundation, replace the coatings, install fences, roof structures, make glazing and ennoble the areas.
I am a frequent customer
Corporate
I am a corporate client
We offer additional services
We are engaged in maintenance of the facility after commissioning: we take care of the condition of sports surfaces, ennoble areas, do glazing and other general construction works.
We take on complex projects
We have enough experience and capabilities to solve the most non-standard and complex tasks. Many of our specialists took part in the preparation of sports grounds for the Olympic Games in Athens and the 2018 World Cup.
We cooperate with global companies
We maintain strong partnerships with well-known manufacturers from Europe and Asia. At the request of the customer, we supply the goods you like from abroad in the shortest possible time.
We provide detailed advice
We answer in detail all the client's questions about the project and our services. Also, we are ready to provide professional legal advice on construction issues.
We build turnkey facilities
We provide a whole range of services: designing an object, drawing up design estimates, building a foundation and base, selecting and laying coatings, erecting roofed structures, installing appropriate equipment and necessary communications.
Our clients
I am a corporate client
Acknowledgments and certificates of conformity
Company "SportObject" offers its services in the field of sports construction. We are engaged in the construction of turnkey basketball courts: we design, draw up design estimates, coordinate the construction, mount the foundation and roof structures, lay bases and coverings, perform finishing work, provide communications and deliver sports equipment. Each of the stages of work is implemented strictly according to the schedule agreed with the client, which allows us to deliver a fully finished project on time.
We value the trust of each customer and guarantee comfortable cooperation
We travel to any place in Russia;
We provide detailed advice on construction issues;
We select high-quality solutions for the client's budget;
We help with the choice of an advantageous place for construction;
We work with complex and non-standard ideas;
We offer creative solutions within a reasonable budget;
We provide additional facility maintenance in other regions of Russia.
We supply basketball surfaces from world manufacturers
The dynamics of basketball matches means high speed, sudden movements and heavy loads on the joints. It is very important that the flooring of the basketball court is both wear-resistant and injury-proof at the same time. For basketball courts we offer: tennis, hard or soft-hard, modular plastic, polyurethane coating and crumb rubber coating.
Our company only works with proven materials that have passed the strictest quality control, so we offer a wide selection of outdoor basketball surfaces from domestic and foreign manufacturers, such as: ERFOLG , BERGO , Plastfacto , Conica , Novol , Aropa , CRUMB , GUMBIT 90 MASTER FIBER and many more.
In addition to the construction of basketball courts, we take care of the complete set of the object and provide it with all the necessary equipment until it is ready for operation. In accordance with the requirements of the customer, any sports equipment can be installed: backboards, rings, stands of a certain capacity, running tracks, a sector for standing long jumps and, of course, various types of fences.
We offer metal fences or safety nets at the customer's choice
Metal 2D and 3D railings are sectional structures of increased strength with rod diameters from 4 to 6 mm, protected by a polymer and zinc coating. Unlike other fences, mesh panel fencing is maintenance-free - it does not collect dust, does not fade in the sun and does not deform under wind loads, and also does not need periodic painting
Protective mesh made of kapron or nylon threads can have different mesh sizes: 100x100, 40x40 or 20x20. Such a fence is ideal for zoning the playing space and protecting spectators from sports equipment. The mesh does not need maintenance and is easily restored
While building new basketball courts, we also work on existing facilities that need major repairs or minor restoration. We are happy to undertake the design of a sports facility, without including construction work, and for the implementation of the facility according to an already finished project.
You can ask us a question, leaving your contact details. We will call you back shortly.
You can also call 8 (495) 240-82-24
Concrete preparation for playgrounds, football or basketball mini field - Profifloor
Arrangement of industrial floors
updated
Recently, more and more children's playgrounds, mini football fields, basketball courts are being built and reconstructed in Kyiv. One of them was an old abandoned site on 3 Alekseevskaya Street in Kyiv.
One of the sponsors decided to do a good deed and financed the construction of a mini football field on it.
This mini field measures 12 x 22 meters.
The first step was to level the surface and install the boards.
Then followed: backfilling of the site with a crushed stone-sand mixture of two fractions 40-70 with an average thickness of 100 mm and 0-40 with an average thickness of 50 mm A plastic film is needed so that the moisture from the concrete does not go too quickly into the soil. All materials were provided by the customer.
Laying polyethylene film, reinforcing with mesh and laying the route of the concrete pump
Then we started pouring concrete.
The thickness of the concrete was about 120 mm. But it was necessary to fill in below the side by 12 mm. since further coating of rubber crumb will be made, the thickness of which should be from 9 to 15 mm. The peculiarity of the work was that the site should have a slope of 1.5% in the longitudinal and 1% in the transverse direction, so that the water does not stand on it, but leaves along the slope.
The next step was grouting the surface. In such cases, it is imperative to grind concrete, because. if you do not rub it, then the rubber crumb of the future coating will stick to the concrete milk, which will eventually shoot off and fall off along with the crumb.
Grouting was done with discs and once with paddles. Thus, the adhesion of the rubber coating to the concrete on the site will be the best.
The below videos provide an example of the procedure involved for installing a popular Goalrilla in-ground basketball hoop system yourself...
Please keep reading because we have outlined how to do each step for this project from start to finish.
This significant length may not be necessary for friendly games in the backyard. You and your friends may feel overwhelmed by the size and tire quickly. 
Half-court is a great option for those focused on shooting hoops rather than running the full court. 
There is a standard pour of concrete used for basketball courts, a 100mm (or 4" thick) concrete slab using 3500 PSI concrete, and 1/2″ rebar for reinforcements. This pour-thickness and type of concrete are essential to the plan because both are typically done professionally. The concrete is meant to set and dry for about 72 hours. 
Take the time to consider which size would be best for your home by evaluating your skills as a player and measuring the area dedicated to the court. Then begin to budget the cost of materials and plan ahead for the time necessary to set aside for the project. All in all, it is doable with this information in mind. And the payoff will be worthwhile to have some games played in the comfort of your own backyard. 
The coating is made of high-strength crumb rubber and a binding polymer (polyurethane adhesive). 
Field slopes of several different types depending on site operating conditions. 
Gluing must be done securely. The material in the work requires getting used to, because the two-component glue rolls down after a while and they need to work quickly. 
Therefore, if necessary, we can supply everything you need to the object at a wholesale price. We install all this equipment, advise in which cases which is better, etc. We can supply many things both in a finished version and make them ourselves on the spot. 
Relatively speaking, even if a tractor passes over the base, there will be no tire marks, because everything is solid and dense! 
In this regard, the gate is either concreted or attached to an accompanying fence. 
We work individually with each client: we take into account your wishes, fit into the budget and comply with the agreed deadlines. 
Each of the stages of work is implemented strictly according to the schedule agreed with the client, which allows us to deliver a fully finished project on time. 
For basketball courts we offer: tennis, hard or soft-hard, modular plastic, polyurethane coating and crumb rubber coating. 
All materials were provided by the customer. 
