How to make a basketball court with cardboard

diy cardboard basketball hoop at home

Upload

For You

Following

motivatedbymylan

Mylan

DIY Cardboard Hoop 🏀📦🔥 Reply to @chris_columbus 🤷🏽‍♂️ #MotivatedByMylan #diy #basketball

27.3K Likes, 203 Comments. TikTok video from Mylan (@motivatedbymylan): "DIY Cardboard Hoop 🏀📦🔥 Reply to @chris_columbus 🤷🏽‍♂️ #MotivatedByMylan #diy #basketball". DIY CARDBOARD HOOP. Bank Roll.

268.1K views|

Bank Roll - Lil Tati

motivatedbymylan

Mylan

DIY Cardboard Basketball 🏀🔥 #MotivatedByMylan #diy #basketball

51.5K Likes, 212 Comments. TikTok video from Mylan (@motivatedbymylan): "DIY Cardboard Basketball 🏀🔥 #MotivatedByMylan #diy #basketball". CARDBOARD BASKETBALL | DIY. Coming In Hot.

636.2K views|

Coming In Hot - Andy Mineo & Lecrae

motivatedbymylan

Mylan

On a mission to create, motivate and inspire! 🧠💡🏀 #MotivatedByMylan #blackcreatives

12.7K Likes, 63 Comments. TikTok video from Mylan (@motivatedbymylan): "On a mission to create, motivate and inspire! 🧠💡🏀 #MotivatedByMylan #blackcreatives". GO GET IT FT. POPPY CORLEONE (GAMEDAY VERSION).

136.8K views|

GO GET IT FT. POPPY CORLEONE (GAMEDAY VERSION) - Twan B

kian_yad

wayboiboiboi

It’s luminous too... i don’t think i can top this #fyp #quarantinelife #quarantine #boredathome #diy #foryou #foryoupage

TikTok video from wayboiboiboi (@kian_yad): "It’s luminous too. .. i don’t think i can top this #fyp #quarantinelife #quarantine #boredathome #diy #foryou #foryoupage". So i tried making a wooden basketball hoop | Gave up... | Then I made a better one out of cardboard and its the best thing ive ever made . Promises (Skrillex & Nero Remix).

2455 views|

Promises (Skrillex & Nero Remix) - Skrillex / Nero

sunshine_george8

sunshine ☀️

Following back everyone who follows and comments done!❤️#holidaycrafts #birds #diys #crafts #fyp

TikTok video from sunshine ☀️ (@sunshine_george8): "Following back everyone who follows and comments done!❤️#holidaycrafts #birds #diys #crafts #fyp". How to make your bird a basketball hoop to play with! | You will need: Piece of cardboard One toilet roll Hot glue A small ball with a bell Scissors Rope | Cut a piece of cardboard to any size that you would like! | . ... Jingle Bell Rock.

1309 views|

Jingle Bell Rock - Bobby Helms

secretweaponurai

Urai

made a basketball hoop for my room it was super wasy! Watch #diy #basketballhoop #basketball #easy #fun #fyp #fypage #viral #explore #share #howto

379 Likes, 17 Comments. TikTok video from Urai (@secretweaponurai): "made a basketball hoop for my room it was super wasy! Watch #diy #basketballhoop #basketball #easy #fun #fyp #fypage #viral #explore #share #howto". original sound.

14.9K views|

original sound - Urai

spladey

spladey

DIY mini basketball hoop 🏀 made out of paper!! 📝 Like And Comment If You Want A Tutorial!#minibasketballhoop #fyp #foryoupage #for_you_page #foruyoupage

1. 1K Likes, 24 Comments. TikTok video from spladey (@spladey): "DIY mini basketball hoop 🏀 made out of paper!! 📝 Like And Comment If You Want A Tutorial!#minibasketballhoop#fyp#foryoupage#for_you_page#foruyoupage". DIY Paper Mini Basketball Hoop. original sound.

49.5K views|

original sound - spladey

cardboard.studio

Crafts 🤍

Mini basketball!🏀🤩 #UnsealTheMeal #OscarsAtHome #healthadepopit #cool #fyp #basketball #cardboardcrafts #fypp

2K Likes, 18 Comments. TikTok video from Crafts 🤍 (@cardboard.studio): "Mini basketball!🏀🤩 #UnsealTheMeal #OscarsAtHome #healthadepopit #cool #fyp #basketball #cardboardcrafts #fypp". Mini coardboard basketball! 🏀⛹️‍♀️. sonido original.

36.1K views|

sonido original - Esteve

jakethejuice

JakeTheJuice

Reply to @geneoray I finally built a new hoop! #diy #basketball #hoop #homemade #build

20. 1K Likes, 107 Comments. TikTok video from JakeTheJuice (@jakethejuice): "Reply to @geneoray I finally built a new hoop! #diy #basketball #hoop #homemade #build". Hits 2021 (Mashup).

232.1K views|

Hits 2021 (Mashup) - Trinix

motivatedbymylan

Mylan

CEO of DIY’s? Thanks for 100k followers!! 🙏🏽🧠💡🏀 #MotivatedByMylan #basketball #fyp #diy

263K Likes, 581 Comments. TikTok video from Mylan (@motivatedbymylan): "CEO of DIY’s? Thanks for 100k followers!! 🙏🏽🧠💡🏀 #MotivatedByMylan #basketball #fyp #diy". That Way (Bonus Track).

2.1M views|

That Way (Bonus Track) - Lil Uzi Vert

How to make NBA Basketball Board Game using Cardboard

Introduction

“We don’t stop playing because we grow old; we grow old because we stop playing.”

And we couldn’t agree more! The key to staying young is to never stop playing, and to never EVER stop DIYing! 😉 So, we thought why not combine the two!  And voila – here we have for you the DIY Arcade Basketball Game! This super fun game will be the best DIY game you’d have ever played so far. With lucid step-by-step instructions and easy programming in PictoBlox, this game is going to be as amusing to make as it will be to play.

So, what are you waiting for? Download PictoBlox from HERE and begin right away!

Components Required

Building Guide

Step 1: The cutouts

Making such a precious piece of art ain’t gonna be easy, and we’ll require a lot of parts for the same. Go grab a piece (a big big piece) of cardboard and draw outlines for the following according to the dimensions provided in the image above. If you wish your arcade to stay with you for years, use MDF sheets instead of cardboard.

You need to take the following cutouts. The names are given with the corresponding to the numbers given in the image above.

1. The Roof of the Ball-street
2. The Hawaiian Wall and the Cuban Wall
3. The Base of the Garage
4. The Peek-a-boo
5. The walls to keep the scoreboard
   1. The Neckpiece
   2. The Legpiece
6. The Mexican Border
7. The Ball-street
   1. The Red Carpet
   2. Bodyguard – 1
   3. Bodyguard – 2
8. Dunk-in Trudeau
9. The Gateway of Ball-street
10. The side walls of the Garage
    1. Watchman – 1
    2. Watchman – 2

Step 2: Making the Ground

1. Once you have all the cardboard pieces ready, let’s begin with the assembly. Firstly, we are going to make the Ground of the Basketball Arena.
2. Attach the two bodyguards to the Red Carpet as shown in the image. They direct the wrecking ball right to the garage!
3. Draw a horizontal center line across the Hawaiian and Cuban walls.  Now, bring the red carpet and attach it to the lines drawn on the walls. Wonder why? This will elevate the red carpet which helps the balls to roll down easily and prevent them to stay on the ground.
4. Take the Gateway of Ball-street and attach it to the red carpet using Hot Glue.

   Note: Make sure that you align the window on the Gateway of Ball-street to the gap between the bodyguards.

5. Now, glue Dunk-in Trudeau to the ground, i.e. to the red carpet and edges of Hawaiian and Cuban walls.
6. Thus, we have successfully made the ground of our basketball arena.

Step 3: Attaching the Servo

1. Take a micro servo and calibrate it using evive’s firmware. Switch ON the evive, go to Controls, then select Servos, choose Servo 1, and there you go!
2. Now attach it to the small hole given in the Gateway of Ball-street. Why servo? Will discuss in the later steps.
3. We will make sure that no wires are seen on the ground. Thus, make a small hole besides servo in the red carpet and pass the wires of the servo through it.

Step 4: Attaching the Roof and the Window

1. Time to cover the servo. Take the two walls of the scoreboard i.e the neck piece and the leg piece and glue them on the Roof of the Ball-street.
2. Now, fix the Roof of the Ball-street to the red carpet.
3. Once done, take the Peek-a-boo and fix a servo horn to it. Once the game starts, the servo head turns 90 degrees, which in turn opens the window to set the balls free. The Peek-a-boo remains closed through the game giving you a fixed number of chances.

Step 5: Making the Basketball Nets

1. Take three glasses of Polystyrene (the number depends on the difficulty level that you want to have for your game).  Cut the base of the glasses so that the balls can easily pass through them. 
   
2. Wait, we want basketball nets, not glasses. Let’s turn glasses into nets by perforating them to death. We have the nets now (the dumb nets).
3. Let’s make them smarter so that they can count the number of time the balls pass through them and multiply it by the score assigned to the net, thus giving you the total score.
4. Sounds like a lot of work? No, all we need is an IR Sensor. Roll a piece of paper using ice cream sticks and attach the IR sensor to it. We already have holes in our nets, so simply glue the IRs in one of the holes.
5. Now attach the (now smart) nets to the red carpet at the places of your choice.

Step 6: Making the Catapult

1. Take 6 small pieces (nearly 2 cm x 2 cm) of cardboard and make two stacks each of 3 pieces using glue. Now cut another cardboard of size (5 cm x 5 cm) and place these two stacks on the opposite side. Take a small and thin yet pointy stick (go pick a toothpick) and pass it through both the stacks.
2. Buy an ice cream and eat it, coz we will need the ice cream stick. Take the ice cream stick and place it on the center of the small stick using glue.
3. Now, take the similar small, thin, pointy sticks and fix them in the two stacks such that they face forward.
4. Now attach a rubber band across these sticks. Attach a cap on the ice cream stick to hold the ball.
5. You catapult is now ready, decorate it the way you want. 
6. Once done, attach it to the Roof of the Ball-Street.

Step 7: Making the Garage

Once the balls walk out of the red carpet we need something to hold them. We’ll make a small box or garage for the same. Take the Base of the Garage and attach it to the Gateway of the Ball-street. Place the watchmen on both the sides of the garage. Finally, close the garage using the Mexican Border.

Step 8: Beautification of the Arena

The basketball arena seems so cardboardish, let’s add some colors to it. We’ve done it a certain way, you can color it the way you want to.

Step 9: Adding the Scoreboard

Now, both the arena and the players are ready all you need to do is to add the scoreboard.

We are going to use the TFT Display of evive to show the score, timings, and instructions.

Connect all the IR sensors and servo to evive and play.

Connect all the three IR Sensors and the micro servo in parallel and connect their GND to evive’s GND pin and VCC to evive’s 5V pin.

Now, time to connect the Signal Pins:

1. IR Sensor 1 – Digital Pin 2 of evive
2. IR Sensor 2 – Digital Pin 3 of evive
3. IR Sensor 3 – Digital Pin 4 of evive
4. Servo Motor – Digital Pin 5 of evive

Step 10: Code the Rules

You know the rules, your opposite player knows the rules – the last net gives you 50, the middle net gives you 20 and the net closest to you give 10. But, how will our scoreboard/ umpire know it? Just upload the PictoBlox code given below and its all set now.

Step 11: Conclusion

With this, your DIY Arcade Basketball Game is ready! Challenge your friends and make the most baskets to win the game!

Circuit Diagram

Code

Do-it-yourself basketball hoop for children

Basketball is a great game, and the yard version is the most democratic kind of sport. It can be played by a team of 6-8 people or by yourself practice throwing.

A basketball hoop installed in the backyard or in the yard is sure to gather fans of this sport around. Moreover, often homemade product is better than purchased options , since the age, height, and preferences of the players are taken into account.

It can be much stronger and more durable than store-bought . And a person receives much more moral satisfaction from a hand-made ring.

How to make a basketball backboard with your own hands

First, you need to decide which ring you want to get in the end. Just a basket with a wall or tree mount, or a complete shield complete with everything you need. Then - choose a place to install the shield and prepare the site. Next - break down the work into steps.

Photo 1. Scheme of a standard basketball backboard with the necessary measurements. To play in the yard, it is not necessary to consider all of them.

Tools and materials

• jigsaw for metal;
• hacksaw for wood;
• drill or hammer drill;
• adjustable wrenches;
• paint and brush.

To make the ring, you can use thick steel wire , with a diameter of at least 5 mm , iron strip or old hula hoop . It will have to be shortened a little in the future. For the manufacture of the shield, plywood will be used, at least 5 mm thick . If the shield will be installed in the yard, then a strong pole is provided for support.

On the ring there must be a net : after the ball hits the target, it will direct it straight down, and not to any corner of the court. It takes 9 to craft.0005 long cord.

Pieces of cord approx.

Then with another segment in a circle, tie all the ropes, and so several times with an interval of 5-6 cm. Net is ready.

The shield is sawn with a jigsaw or hacksaw after marking with a pencil. After that, the product can be painted.

Important! The black stripes and the square above the basket on the shield must be 5 cm wide otherwise they will simply not be visible.

After the paint has dried, you can attach a ring to the shield, and fix the shield itself to a pole or wall. The rate and type of fasteners depends on what the ring was made of and how the shield will be attached. The main thing is to calculate so that the design can withstand at least 40-50 kg of load.

Home Mount

If the ring is made from round wire , and its ends are bent down, then they can be pulled to the shield with 2 bolts connected by a metal plate in the area of ​​​​the caps.

If the ring is made from a wide iron strip , then you must first bend the ends so that the strip fits snugly against the shield.

Such a product is also fastened with bolts threaded through pre-drilled holes in the strip and plywood.

If shield is not available and the ring is to be attached directly to the wall, anchors can be used instead of bolts . In this case, you will need a hammer drill to make holes in the wall.

To a tree or wooden post , the ring can be nailed with 100 mm nails or screwed with long screws.

Attention! Whatever type of fastening is used, one thing unites them - it is necessary to put the ring on a horizontal level. If it hangs crooked, then the ball will slide off the edges past the basket.

After the shield and ring are fixed, the site is prepared. It should not have stones, puddles, and protruding stumps. Basketball is a very traumatic sport and players do not need any extra risk at all, they will stumble over a bush, stump or stone sticking out on the court. If the ring is installed indoors, then before playing , you need to make sure that everything that breaks easily is hidden, and the glass on the windows is securely protected.

Helpful Video

Check out this video showing how to make a basketball hoop from a metal rod.

Results

Which ring is better, homemade or purchased. There is no definite answer here. Homemade product performs sporting functions and is more aesthetically pleasing than for family members and friends of the manufacturer.

Even if outwardly it is a little more unsightly than the store ones. In addition, homemade is calculated for certain loads . Whereas a store product, it is not known how much it will sag in conditions of harsh operation.

On the other hand, high-quality, expensive , a ring with a shield, produced at the factory in compliance with all sizes and GOST , handmade, unique. So it's up to the players to choose.

Anna Gavrilova
Master class on making a basketball hoop and net at home

To begin with, I took a piece of metal-plastic pipe left after the repair.

By drilling holes on both sides. Wired it all up!

She asked her husband for a corner what he found from that and made .

The tied ends were insulated with electrical tape.

Putting the whole structure together.

We take nylon threads and make blanks, approximately 2 meters each (taking into account that we will fold in half there will be 1 metor)

We fasten the ring so , so that it is convenient to weave, the fan helped me. And now the hardest part. We connect the threads so that we get a network.

And happy ending! Ring and mesh ready . My kids appreciated it. Now we can't wait for spring. We will attach it to the group site. And we will please all the children in the garden.

Master class "Sports equipment" for kindergarten from wood-slab Take a wood-slab. Break it down into four parts. On each, draw a picture: a blade of grass, a flower, a house. The remaining fourth.

Graduation veil ceiling Graduation ball in kindergarten has passed! Farewell songs, excellent dances, words of gratitude, tears of parting - everything was there! Flew.

Did you have to restrain yourself when you passed the basketball court in order not to throw the ball into the basket? Why hold back? Team sports reliably unite people of any age, religion and social status. And in order to look decent at any moment and on any site, it is enough just not to start training.

Small places for playing streetball can be equipped on sports grounds near the house, and rings can be built at summer cottages for children to play from improvised means. So, how to make a basketball hoop yourself?

Dimensions and materials required

1. The inner diameter of the basketball hoop is 45 cm;
2. the height of its upper edge above the playground is 3.05 m;
3. ring material - metal bar, plastic pipe, improvised materials;
4. diameter of a bar or a pipe for a ring — 16-20 mm;
5. distance from the ring to the shield - 15 cm;
6. mesh length - 40-45 cm;
7. mesh material - metal chain, synthetic cord, rope, braid.

Types of basketball hoops

Hoops can be different:

• metal with anti-vandal nets made of metal chain;
• metal with rope mesh;
• plastic with nets of various types of materials;
• creative (from the remains of construction, from old furniture, from large plastic containers).

The construction of a metal bar ring begins with marking. Since the basket must have an internal diameter of 45 cm, a rod or pipe is selected based on this.

Material length is calculated using the formula:

Bar length = Circle diameter x 3.14 (pi value). We have 45 × 3.14 = 141.3 cm. diameter and straighten with a mallet. The rest of the rod or pipe should be prepared for fastening to the shield using drilled holes and screws.