GDYBL Home

Team
- Choose a Team
  - BOYS 5/6
  - BOYS 6
  - BOYS 7/8
  - BOYS 8
  - GIRLS 5/6
  - GIRLS 7
  - GIRLS 8
- Schedule
- Multi-Schedule

For full functionality of this site it is necessary to enable JavaScript. Here are the instructions how to enable JavaScript in your web browser.

How to make basketball hoop net

DIY Chain Basketball Net – The Sports Installer

Search for:

Sports Equipment

by Michael WestheadAugust 31, 2021November 15, 2021

Anyone that has played basketball has enjoyed the sound of the basketball making the swoosh sound. In fact, the expression “nothing but net” is one of the most popular expressions in all of sports.

This popular sound is almost always associated with a nylon net. If you’ve played long enough, however, you’ve had a chance to play on a playground court with chain nets. It’s a different sound and experience but can be even more enjoyable than the sound of the swoosh. It’s something you should experience.

What’s cool about chain nets is they’re easy to make happen. So much of the equipment used in the sports-equipment industry is made from raw materials like steel and glass. Most items, like basketball hoops, require bending, molds and other such items that make fabricating them way too expensive and troublesome for a DIY project. However, there are other products such as pull-up bars and chain basketball nets where you can get the raw materials from a hardware or lumber store and build it yourself.

Below are some instructions on how to build your own chain basketball net.

First off, this is something you should do just for the fun of it. It may be worth it if you have a bank of basketball hoops and you can buy a larger supply of chain with volume pricing or if time is an issue and you need something right away. Otherwise, you’re kind of better off just buying one. I say this because there is not a great deal of cost savings mainly because chain nets themselves aren’t that expensive.

Yes, they’re $50 but building them is going to take a couple hours and sourcing material for one net and doing it yourself is going to save you $10.

$36 to $40 dollars (Not including taxes or shipping)

You can see by the pricing above that you’re looking at roughly $36 to $40 for a new net. I’m not sure what shipping to you will cost but shipping from Kansas to New Jersey is roughly $16. Add it up and you’re looking at $51-$55. (If you want to avoid all this and buy it brand new, I can provide it to you.)

$42.80 total cost of DIY materials to include taxes and, obviously, shipping.

As you can see from my receipt, you’re saving a little money by doing it yourself. What I’m describing below is more for fun than anything.

Materials needed:

2″ Zinc plated chain

Chain link– I purchased 2″ zinc-plated welded steel loops. You can save a little more money if you were to buy larger lengths of chain. For the vertical lengths, I went with 13 links which equals roughly 18″. For the horizontal links, I went with a 48″ length chain for the upper ring and 36″ for the lower ring. I had a little chain leftover but I wanted to play it safe and not run out of chain and have to go back to Home Depot.

Bolt Cutters

There is a cutting station at Home Depot right next to the chain but, funny enough, there are usually bolt cutters sitting right next to it to use too.

S-Clips

S-Clips- I went with a small S-Clips because it’s not like this net is load bearing. I also wanted something that was a little pliable so I could crimp it easier. I went with four packs of four.

S-Clips

Hang each individual 13-link chain from the rim with open S-Clips.

Up-close look at net

From here feed the top horizontal chain through each of the 5th links from the top all the way around and use one S-clip to attach the chain together. When attaching the chain together, I also attached the S-Clip to one the vertical chain in the rear of the net. One item of note, the top horizontal chain had exactly 39 links.

S-Clip on bottom chain

I then fed the bottom horizontal chain through the 4th link from the bottom. With this phase, I actually cut the chain into three equal lengths of seven links and attached them with S-Clips. I did this because the chain needed to be secured on the bottom to not get tangled and unravelled.

Your last step is to crimp all the S-Clips to the rim.

VOILA!

A couple items of note. I put roughly 100 balls through the net. (Mikan drill baby!) There were times when the chain wasn’t perfectly aligned but it corrected itself as time went on. I will keep an eye on my net to see if I have to adjust the chains or add S-Clips.

I hope you enjoyed this and, if you ever need sports equipment for your playground, school or home, feel free to reach out to me at www.oncallsports.com.

Like this:

Like Loading...

indoor basketball hoop. – Reading My Tea Leaves – Slow, simple, sustainable living.

I made an indoor basketball hoop. File that under Things I didn’t Think I’d Be Doing This Spring.

I wasn’t sure I’d write about it because it’s cobbled together from things we had at home, which is the most satisfying kind of project to make but a more frustrating kind of project to be presented with by someone else. Apologies in advance because I can’t offer the exact size of the screw or magnet that I used and my net tying instructions are probably wanting in both detail and technique, but I’ll try my best to show what I did.

I’m hoping you all might take this in the spirit it’s intended, which is an opportunity to dig around in your toolbox for washers and screws and to flex your creativity and make something you’ve never considered before. Mostly I’m hoping this might provide a momentary diversion on days desperate for them.

In terms of a basketball hoop specifically, my goal was to make it movable (and removable) because there are players of varying heights in our apartment and more importantly, because there’s no telling how long the interest might last. I also needed it to be not too much of an eyesore and to actually work. (This replaces another iteration involving rolled up paper and blue painters tape. Believe me when I say it was more than aesthetics alone that were improved in this version.)

For a ball, we’re using an oversized pom-pom. While it’s quite sturdy when fitted with a heavy-duty magnet, the hoop isn’t strong enough to support an actual basketball. More importantly, neither are our fragile nerves. We needed something that’s virtually noiseless, for ourselves and for our neighbors. We tried a small blow-up beach ball and a woolen knit ball and both worked but the pom-pom has been perfect.

For the net, I modified the macrame technique that Rose taught me last fall and I’ve done my best to offer simple instructions below.

Materials:

+ The interior ring of a 10-inch wooden embroidery hoop

+ hand drill or electric drill

+ 1 heavy duty magnet hook (the key is having one with a detachable screw hook)

+ screw

+ washers

+ screwdriver

+ cotton butcher’s twine

+ scissors

Directions:

To make the hoop:

+ Begin by drilling a small hole into the side of your embroidery hoop.

+ Unscrew the hook from the magnet. Fit a screw that matches the width and thread of the hook through the hole in the wooden hoop from the interior of the hoop, so you can screw it into the magnet post on the other side. Depending on the size of your magnet and hoop, you might need to use a series of washers, as I did, to help secure a tight fit.

To make the net:

+ Begin by attaching the hoop to a magnetic surface, like a steel apartment door, refrigerator, or radiator.

+ Cut 8 ~4′ lengths of cotton butcher’s twine.

+ Fold each piece of string in half. Place the folded loop over the top of the hoop. Loop the ends of the string through the hole you formed and pull, forming the cast on stitch. Repeat for the remaining strings, placing them at even intervals around the circumference of the hoop.

+ Take the left-hand string hanging from one loop and the right-hand string hanging from the adjacent loop and pull them together to form the point of a triangle, roughly 3 inches down from the hoop. Tie a simple knot by looping both strings through each other.

+ Repeat around the circumference of the hoop until all of the strings are tied.

+ To make a second row, follow the same technique as above. This time, your knots will be forming the bottom point of a diamond. Tie your knots roughly 2 inches down from the previous knot. This will allow your net to begin to taper a bit. Repeat until all of the strings are tied. You’ll now have two rows of knots, forming large diamonds around the hoop.

+ To make a third row, follow the same technique as above. This time, form the bottom point of the diamond about 1.5 inches down from the last row of knots.

+ To finish, tie an additional final knot in the bottom of each set of strings, about an inch directly down from the last knot you tied. (You’re not pairing strings from different sides this time.) Trim any excess length.

Notes!

+ Wooden embroidery hoops are quite thin and I didn’t have any trouble using a small hand drill to make my hole, but because of the relatively fragile wood, take care not to split the hoop with too large a hole.

+ I attached my hoop to our steel apartment door with a magnet, but you could also place on your refrigerator or another magnetic surface. If your home is fitted with metal corner beads (the metal piece used to form sharp corners with drywall) and your magnet is very heavy duty, you might even be able to attach the hoop to a door frame.

And that’s that. If you make one of your own, I’d love to see photos. If you have more ideas for quiet gross motor play for small apartments, I’m ALL ears.

Do you like basketball and want to make a hoop? I wanted to make it myself, not buy it, and I ended up making it. It's pretty cheap, especially if you have some of the stuff you need to assemble.

Let's start assembling a basketball hoop with our own hands.

Step 1: Shape the Ring

The first thing you need is a ring, I made it with 12mm rod, but it doesn't have to be that size. The standard diameter of a basketball hoop is 450 mm.

To make it flat you need something to wrap it around, this thing should be about 400mm in diameter.

I found an old car rim of the right size, you will need to clamp it to the table with a clamp using a piece of wood.

As shown in photo 2, place another clamp a little further from the first with a rod between them.

As shown in photo 3, slowly wrap the rod around the disk, once you wrap the rod and its edges overlap, cut off the straight ends.

Use a clamp to press the ends together, then weld them together.

To finish this part, place the ring on the ground and straighten out all the curves.

Step 2: Frame

Bend a piece of flat metal, mine was 4mm thick.
Weld it to a flat spot in the ring.
Cut two rods 320 mm long.
Weld them as shown in the photo.
Drill four holes to match your existing bolts.
If you need a netball ring, you can simply attach it to the pole and skip the rest of the steps.

Step 3: Mesh Staples (Optional)

Show 7 more images

Do this step if you need mesh. If you need a network, you will have to buy it.
This step is not as difficult as it seems.

cut 12 pieces of wire 90 mm long (I would recommend making a few spare parts as they are easy to ruin.)
bend them in the middle (it doesn't matter if the ends are the same length)
clamp the wire in a vise with a steel rod at one end
bend wire over rod
repeat this with all parts of
retighten the wire wrapped around the rod (see photo)
bend it
repeat with all parts of
retighten wire wrapped around stem
bend it (at this point you can't just remove the wire from the rod - you will need to slide it to one of its edges and remove it from the edge)
repeat with all parts of
divide into 12 pieces and weld on the brackets

Step 4: Backboard

Cut the board to size. My board does not fit the full size of basketball boards. (the second picture shows the dimensions of a standard shield).

My measurements are 1100mm wide, 700mm high and 25mm thick. (You don't have to be that size.)

Step 5: Paint the shield

Once you've drawn all the lines on the shield, lay masking tape over them. If you try, everything will look neat.

If you are using MDF, you will need to take care to protect the edges from moisture (as shown in photo 2).

Carefully paint over the areas around the masking tape.

Remove masking tape after enough coats of paint have been applied and the board looks complete.

Step 6: Paint the ring

First you need to sand the metal. I used a grinding disc on a grinder.

The ring must not be black or white, it must stand out from the shield. Usually the ring is painted orange or red.

The easiest way to paint inventory is from a can.

Step 7: Assembly

Put it all together.

How to make basketball hoop net

DIY Chain Basketball Net – The Sports Installer

Like this:

indoor basketball hoop. – Reading My Tea Leaves – Slow, simple, sustainable living.

Materials:

Directions:

Notes!

how to weave a basketball net

HOW TO QUICKLY WEAVED A BASKETBALL NET Homemade Basketball Hoop Nets

How to weave a basketball net with your own hands The easy way How I made a basketball hoop

Do not buy a basketball net, but quickly weave it from a clothesline

How to knit a basketball net

DIY basketball hoop

Outdoor Basketball Hoop Net Fast Just Sami

Netting for billiards or basketball hoop

metal chain basketball net

Basketball hoop How to tie the net yourself

Basketball hoop basketball net

WHY THE NBA SCORE SO MANY POINTS

Paracord net 2

Basketball net with Banggood Com

How to make a basketball net out of an ordinary thing

How to make a net for a basketball hoop The easiest weave

Plain shop basketball net

DIY BASKETBALL HINGE

Macramé mesh dress

Basketball net for hoop shop BASKET FAMILY

How to make a basketball hoop DIY basketball hoop

مقالات ذات صلة

Basketball hoop - how to make a stand with a backboard with your own hands