Home » Misc » How to make your basketball shoes have more traction
How to make your basketball shoes have more traction
4 Quick Ways to Get Grip on Your Basketball Shoes
Grip is an incredibly important part of any basketball shoes. No matter what surface you play on, being able to stick to the floor allows you to run, move, and cut to the best of your ability.
Soles wear down quickly. They also collect quite a bit of dirt. Both of those setbacks cause you to slip and slide while on the court. That then greatly hinders your ability to stop and go, which then makes it much harder to drive to the lane or play defense.
Even shoes with only slightly worn down grip can cause you to be one second too early or one second too late. In basketball, that makes all the difference.
Quick Navigation
1. The Cleaning Method
Though grip wears down over time, there are quite a few ways to keep your shoes in good shape. The first, and perhaps most effective, is by cleaning them.
Many basketball shoes start to lose their traction as a result of the dirt and dust they pick up from the floor. That layer, even if barely noticeable, causes shoes to easily slide across the hardwood.
There are two different cleaning methods that will help eliminate that layer and reliably give you more grip no matter how much you play.
First, you can wet a washcloth and use it to wipe down the bottom of your shoe. Just make sure to get into the grooves. You don’t need to do a deep scrub, but you need to do enough to lift off the dirt particles.
If you want to go bigger, you can also clean your soles with a stiff bristle brush and soapy water. Scrubbing down your shoe in this manner gives a deeper clean. However, I find that it is quite comparable to using a rag. It comes down to personal preference and the amount of dirt on your shoes.
2. Utilizing Enhancers
If cleaning isn’t working, or if you want to take an extra measure on the top of cleaning, you can always turn to special grip enhancers.
Grip lotions are easily available sprays that coat your shoe to add more tackiness to the sole. A quick spritz will be more than enough to give you the extra grip you need.
There are also special sticky pads, also called sticky mats, that improve grip. These are primarily used in a gym setting, where they sit off to the side of the court. You then step on them before the game or during breaks to get a bit of extra adhesion.
Both of the above methods improve your shoe’s grip. Though they both work on their own, I often use them in combination with the washing method to get the best of both worlds.
Just remember to never use your basketball shoes outside. The traction is specifically made for hardwood. Using it on any other surface can quickly break down the rubber grooves and cause you to slip.
3. Fixing Grip in Game
Sometimes you’ll find your traction steadily breaking down in the middle of the game. If that occurs, you want to moisten your soles right away to ensure you don’t lose your edge.
That can be done through either quickly wiping them down with a damp rag (which some teams or gyms may have on the sideline) or by wetting your shoe with saliva.
Rinsing your hand in a drinking fountain and then wiping it across the bottom of your shoe can help your footwear stick. However, if there’s no time for that maneuver, licking your hand and wiping it on the bottom of your shoe works just as well.
I know the idea of licking your hand mid-game is not the most appealing idea, but it does work. I’ve done it more times than I care to admit, and it always leads to better traction.
4. A More Permanent Fix
No matter how much you use the above methods, there will be times where your shoe grip wears down past the point of no return. If that happens, you can have your soles fixed by a shoe repair service.
Getting your old sole replaced can make your pair feel brand new. It may not be as easy as cleaning the sole or buying spray, but it’s typically much cheaper than going out and buying a new pair.
Of course, if the tread is worn through and shoe repair isn’t an option, the only way to fix the grip is going to be purchasing new shoes.
Final Words
Many people give up on their basketball shoes too quickly. The traction doesn’t feel right, or they find themselves slipping on the court, and they try a new pair. However, there are many easy methods you can utilize to keep your grip strong.
Make sure to try different methods and figure out which one works best for you. Some shoes respond better to cleaning, while others do well with general moisture of sticky pads.
What’s your favorite method for improving your grip? Do you have your own tricks? Let us know in the comments below!
9 Ways to Restore Traction and Make Basketball Shoes Grippy
Today I’m going to show you how to make basketball shoes grippy again.
So if you have a match around the corner, or your shoes are just less grippy and you can’t afford to get a new pair of sneakers at the moment, you’ll love the tips shared in this guide.
To be clear:
None of the tips I’ve shared below is better than the other is.
So if you prefer to clean the outsoles, you find using a sandpaper easier, or you prefer to work with a sticky get, what really matters is ending up with a pair of sports shoes with better traction.
Below are 9 ways to make your basketball shoes grippy and ready for an upcoming training or championship match.
1. Clean the Soles of the Shoes
Dirt and dust stuck on the outsole can make your basketball shoes slide like a car on a wet road.
Why?
Because the accumulation of foreign particles prevents the optimal sole to floor contact, leading to shoes being slippery and hard to use during training or an actual game.
The solution is simple.
You have to remove all the dirt and debris stick on the outsole to restore the grip of the shoes ready for the next big game.
Use a hard bristle brush to remove debris on the bottom of the shoes. You can also use toothpicks if you don’t have the brush.
Dip a towel in a mixture of clean water and a liquid detergent and wipe the outsole of the shoes.
Then, use a toothbrush or a soft brush to scrub the remaining dirt off the outsole.
If you’ve cleaned only the outsole of the basketball shoes, you can use a towel to dry the pair. If you’ve deep cleaned the sneakers, air-dry them.
You could clean the shoes in a washing machine, but you’re more than likely to compromise the quality of the fabric.
So hand washing is the only way to go.
2. Use a Sticky Mat
Often placed at the corners of a court, sticky mats can easily pull out dirt from the soles of your basketball shoes.
SATECH Sticky/Tacky/Adhesive Mat 18" x 36" White...
And they’re very easy to use.
Simply get off the court, step on the mat, and that’s it. The process should help to restore the grip of your basketball shoes.
3. Clean the Court Thoroughly
Assuming your basketball shoes are clean from the inside out, but you still get the slippery effect as you run and practice or play, there’s a high chance the court needs thorough cleaning.
By cleaning the court, you’ll do away with dirt and dust that would have otherwise stick on your shoes and make them slippery.
And cleaning the court shouldn’t be difficult, as there’s no unique procedure to follow.
Just use the same mop and water that you use to clean your house.
4. Use a Sandpaper to Increase the Grip of Your Basketball Shoes
If you can’t afford expensive traction products, use a sandpaper. You’ll love this technique because it’s very easy to use.
Remove your shoes and rub the heavy grit sandpaper against your sole until they feel rough enough. This should increase the gripping of the shoes and give you more stability as you run in the court.
If your shoes smoothen after a while, just re-use the sandpaper to restore the grip.
A nail file is a good option to use in the place of a sandpaper. It works pretty much the same way and therefore the results should be the same.
5. Use of a Sticky Gel
Sticky gels are great for increasing the gripping power of basketball shoes.
Easy to apply and quite effective, the gel is easy to apply and takes effect almost immediately.
Take off your basketball shoes and apply the gel on the sole. Let the content stick on the sole unit and then wear the shoes for your next practice or match.
Although sticky gels are good at increasing the grip of your basketball shoes, its effect is only temporary.
Even then, a single application should give you a good grip for a full match.
6. Use of Sweat and Saliva
When desperate moments call for desperate measures, even your sweat and saliva can go a long way to give your basketball shoes some grip.
Now, I know what you’re thinking:
Spitting saliva and smearing sweat on the sole of the shoes is unhygienic and disgusting.
And you’re right.
But if your sneakers become slippery in the middle of a game and you can’t make your best moves, what options do you have?
Probably none!
So wipe your hand over your face, collect some sweat, and apply it on the sole of your sneakers. You can also spit some saliva on the sole to make the shoes wet.
And what’s the benefit?
Sweat and saliva will moisten the soles, reduce the thin layer of dust, and add some grip so you can keep playing your game.
What to look for before buying jump rope shoes
7. Use Hair Spray to Add Traction to Your Basketball Shoes
Hair spray is a quick and temporary solution to improve the grip of your basketball sneakers.
And it’s very easy to use.
Simply clean and spray the soles for about 20 seconds. Then, let the spray settle.
While it’s only a temporary solution, hair spray will go a long way to improve the stickiness of the sneakers.
After applying the hair spray, you won’t have to worry about shoes being slippery maybe until after the first quarter of the game.
That’s because hair spray helps to improve the stickiness of the sole, therefore giving you a little grip that can keep you from slipping.
8. Use Vaseline to Improve Your Shoes’ Traction
Vaseline enhances the grip of the shoes by keeping it moist for a long period.
To use this solution, first clean the sole of your basketball shoes thoroughly and dry them completely.
Then, smear Vaseline coating over the sole. Use a toothbrush to spread the oil well.
9. Replace the Sole for Better Grip in the Court
Sometimes your basketball shoes are less grippy because the sole unit gave up its function.
If you think about it, worn out soles don’t have the kind of grip that your body deserves.
Instead of replacing the whole pair, simply replace the sole and you’ll be good to go.
Final Thoughts
What do you do when your basketball shoes become less grippy? Do you put them aside for a new pair? Or do you have a little secret of your own to improve their grip and traction?
If you had no idea how to make your pair less slippery, the tips we’ve shared in this guide should be handy.
Remember, basketball shoes with good grip will give your leg the support you need for every game. Not to mention protect you from getting injuries.
From gripping the curt to enhancing swift movements as you dribble and dunk, shoes with solid grip and traction lets you get the most out of the four quarter of every game.
how to wear shoes that are too big for you
What to do so that sneakers do not slip on the floor?
Home / Out of place / Consumer corner / What to do to prevent sneakers from slipping on the floor?
January 16, 2019
With an active lifestyle, it is necessary to prevent harm to health, which can happen, for example, with the wrong selection of sports shoes. Particular emphasis is placed on sneakers, since when training in the gym, a significant load is placed on the joints and feet. It is optimal to purchase shoes specially designed for this purpose from popular brands with their own line of shoes. Sometimes the product can slip heavily on the floor in enclosed spaces. The problem of slippery sneakers is of concern to a large number of sports fans, therefore certain recommendations must be taken into account.
The right choice of shoes
The best way to fix the problem is to buy a new product. In particular, this will be relevant for those who have purchased almost the first item they come across for classes, and have not given proper emphasis to the selection of shoes. Before you buy an Air Jordan, you need to consider a large number of factors so that the product does not slip, choose shoes in which the front is slightly wider than the heel. This ensures proper adhesion to the coating. In addition, you need to purchase a pair that is specialized for a particular type of sport.
When running shoes have recently begun to slip and have been correctly fitted, the cause of the problem must be determined. The sole of the shoe wears out over time, in particular when the loads are intense and actually everyday. To eliminate this difficulty, it is recommended to buy Nike Jordan shoes, which provide reliable grip on the surface.
Help in the workshop
The most expensive and reliable method of fixing the problem of slipping shoes on the floor is to bring sneakers to the workshop. The master attaches special anti-slip pads that improve grip with the coating. It should be clarified that the classes will be held in the hall on the parquet. This is due to the fact that the service is extremely popular in the winter period: people bring shoes to the workshop so that they do not slip on the ice.
A significant advantage of this technique will be the aesthetic appearance of the product after the workshop. Other techniques can somewhat spoil the aesthetic appearance of shoes. The master will put the overlay in such a way that it becomes virtually invisible on the product.
Plaster
To prevent the product from slipping on the parquet, it is necessary to stick a regular plaster to the sole. The method is completely opposite to the first: inexpensive, not durable, and the patch itself will be noticeable on the sole. When shoes slide in the hall, they need to be properly washed, degreased and dried. A roll patch is glued on the sole in some areas. It needs to be cotton, not a smooth, slippery material. This method of solving the problem will be cheap. However, it must be taken into account that the manipulation is repeated almost every time before going to the gym: the patch may peel off over time. So that it does not attract attention, it can be painted with a black marker.
Shoe care
It happens that shoes slip on the parquet due to insufficient cleanliness in the room. The dust will settle on the soles of the sneakers, adding slip to it. It helps to temporarily wipe the product from dust. Others wipe the soles with their hands, which is against the rules of hygiene. The second method: from time to time to stand on a damp cloth. Wet sole does not slip on the floor in the gym.
Glue and sand
There is also a fairly economical and fairly effective method:
Requires adhesive to be applied to soleplate.
Shoes are pre-washed and the sole is degreased.
Glue is smeared all over the sole and sneakers are placed on the sand.
Leave the product for a day until completely dry.
The sand will adhere firmly to the sole, resulting in proper traction of the sneakers to the parquet. Unlike a patch, glue and sand stay on the product for quite a long time, which makes it possible to do the procedure less often. However, once a month (taking into account the frequency of training) the sole of the shoe is covered with glue and sand.
Sandpaper
Sandpaper can be used in the following ways to prevent slipping in the gym. First: the sole is rubbed with it. Do not be overly zealous so as not to spoil the product. Second: glue pieces of paper to the sole of sports shoes. The method is also quite economical.
Homemade tread
When the sole of the sneakers is smooth, and slip on the floor in the hall is provoked by such, it is possible to make a pattern at home. It will give the necessary grip to the surface in the gym. Please note: the method is carried out only for sneakers with thick soles, otherwise there is a risk of damage to the product. The pattern on the tread is made by means of a nail, other sharp metal objects.
Coca-Cola
This method is quite unusual, but it is considered common and effective in order to eliminate slippage on parquet. Some professional athletes actually moisten the soles with this drink before training, performances. It is necessary to wash the sole of the shoe with Coca-Cola, let it dry and start exercising. The procedure itself is carried out right before class.
Other methods
In addition, there are other ways to prevent shoes from slipping on the floor:
The sole is wiped with wax, castor oil, raw potatoes, pine rosin.
Some just offer to spit on the sole: the method is unhygienic and unaesthetic, but it will help for a certain period of time.
It is permissible to stick chewing gum, which must be chewed in advance. The method also does not have a long-term effect.
Finding the right sports shoes is often an impossible task. The right choice of running shoes will be the key to comfort and safety. To purchase Jordan Kyiv sneakers in the right sizes in the krossovki.kiev.ua online store, you need to ask the seller for advice. He will give recommendations regarding the choice of the optimal product, the size of sneakers and help place an order.
He said how he cut him off:
What to do if sneakers slip in the gym
When leading an active lifestyle, you need to control your own health and, above all, do not harm it. Properly selected footwear helps to keep fit and not harm the body. Therefore, you need to buy comfortable, high-quality sneakers that are designed specifically for sports activities. Often, during training in the gym, the surface is slippery, which leads to injuries. In addition, some of the products have a sliding sole, which does not allow the foot to be firmly fixed on the floor surface.
In some cases, the product slips heavily on the floor in an enclosed area. The problem of slippery soles of sneakers worries many people involved in sports, so it is necessary to take into account the recommendations of experts. To get rid of the problem, you should use several effective methods that have been tested by time.
Choice of shoes for the gym
To reduce the chance of slipping in the gym, you need to choose the right shoes. When choosing shoes, you should focus on the following nuances:
Shoes with a wide toe and a narrower heel should be preferred. Such a product will provide proper adhesion to the coating.
Buy shoes that are specifically designed for training. The developers of such models of sneakers specifically produce a silhouette with characteristic features for comfortable use.
Each shoe manufacturer has its own line for indoor and outdoor training.
For each type of sport, different designers produce separate types of sports shoes. It is advisable to buy products that are designed for such purposes from trusted manufacturers who have proven themselves well.
Go to a workshop
The surest way to eliminate the slip of a sole is to take it to a shoe shop. But, this option is more expensive. The specialist attaches silicone pads to the sole to provide proper grip and prevent slipping.
If the product is given for repair, you need to clarify to the master that it is planned to be worn in the gym.
The main advantage of this method will be the preservation of a bright appearance. The specialist does everything carefully and reliably, because the appearance of the product remains the same. Various homemade methods can ruin the look of sneakers. Therefore, when it is important to maintain quality and presentability, it is advisable to go to the workshop.
Apply glue with sand
This method is considered the most budgetary and extremely effective. The meaning is as follows: Moment glue is purchased in the store and applied evenly to the sole. Before the procedure, it is required to clean the product from contamination and dry it. When the surface is smeared with glue, it is required to become sneakers on the sand. Wait for the final drying of the glue. The sand on the sole can last longer than the patch, so the technique will be more effective.
Sandpaper
When at home there is no glue, but there is emery, you can use it. The following is done:
The product is degreased properly.
Sandpaper is taken and the sole is rubbed properly.
To get more effect, several pieces of paper are glued to the bottom of the product with superglue.
The sole is rubbed carefully so that holes do not appear.
Homemade protector
When sneakers have a flat, smooth sole, small screws help to add relief to it and eliminate slipping. They are screwed into several places. To prevent the pointed end from causing damage to the shoe before the procedure, it is necessary to bite off the pointed part with pliers.
This technique is available only in a situation where the product has a dense, wide sole, thin screws are able to deform.
Sweet water
This sweet drink is considered one of the most common ways for people who play sports to eliminate slipping. The algorithm of actions is simple:
Before training, the platform of the shoe is poured with a drink.
Left for a quarter of an hour until completely dry.
Then you can head to the hall without any hesitation. Slip will be completely eliminated.
Other methods
There are situations where the lower limbs slip due to dirty or wet surfaces. In such a situation, it is necessary to constantly wipe the bottom of the shoe so that it remains clean, monitor the coverage in the gym.
In addition to the main ways to help prevent slipping, there are other proven ways:
It is possible to rub the bottom of the sneaker with wax, raw potatoes or fatty oil.
Chewing gum or 2-sided adhesive tape is glued to the sole.
Similar options are also common, but they are one-time, because the tape or gum can come off.
For indoor sports to be comfortable and safe, you need to choose the right running shoes. When sports shoes are comfortable, but slippery, this problem needs to be fixed as soon as possible, as this becomes a provoking factor in injuries. Following the above recommendations, it is possible to eliminate this complexity completely.
A quick spritz will be more than enough to give you the extra grip you need. 
You can also spit some saliva on the sole to make the shoes wet.
The problem of slippery sneakers is of concern to a large number of sports fans, therefore certain recommendations must be taken into account. 
To eliminate this difficulty, it is recommended to buy Nike Jordan shoes, which provide reliable grip on the surface. 
The method is completely opposite to the first: inexpensive, not durable, and the patch itself will be noticeable on the sole. When shoes slide in the hall, they need to be properly washed, degreased and dried. A roll patch is glued on the sole in some areas. It needs to be cotton, not a smooth, slippery material. This method of solving the problem will be cheap. However, it must be taken into account that the manipulation is repeated almost every time before going to the gym: the patch may peel off over time. So that it does not attract attention, it can be painted with a black marker. 
First: the sole is rubbed with it. Do not be overly zealous so as not to spoil the product. Second: glue pieces of paper to the sole of sports shoes. The method is also quite economical. 
The procedure itself is carried out right before class. 
When choosing shoes, you should focus on the following nuances: 
