How to pump your basketball without a needle

🏀 How To Pump A Basketball Without A Needle? [2022]

In today’s guide, I am going to show you how to pump a basketball without a needle.

Ideally, you would have a pump + needle to inflate your basketball in a more civilized way. But if you don’t have a needle and have to pump your basketball, you’ll have to improvise.

Below, I will introduce you to 4 ways to pump a basketball with no needles. These methods don’t require that you buy anything – that would defeat the guide’s purpose since if you had to buy something, you should buy a needle.

4 Ways To Pump A Basketball Without A Needle

1. Use your tubeless bike’s valve stem

If you have a tubeless bike and a pump, you may use one of its valves to pump your basketball. Essentially, you will be using the valve stem as a replacement for the needle.

Here’s how to use a tubeless valve stem to inflate your basketball.

1. Unscrew the fastener on the stem on one of your bike’s wheels and remove the stem.
2. If there is any rubber coating on the stem, pull it off.
3. Attach the stem to your pump.
4. Insert the free end of the stem into your basketball.
5. Start pumping.

And here’s a video demonstrating how to use a bike tubeless valve stem to inflate a ball:

If you have a tubeless bike, then this actually is the first option that you should try. Since the stem is similar to a regular ball needle, a tubeless valve stem allows you to essentially inflate the basketball traditionally.

But if you don’t have a tubeless bike, then read on for some other methods.

2. Use a can of compressed air

If you have a can of compressed air lying around, then you will be able to inflate your ball fairly easily. After using a tubeless valve stem, this is perhaps the easiest way of inflating balls without a needle.

Here’s how you should use a can of compressed air to inflate a basketball:

1. Insert one end of the tube that comes with the can into the ball’s air hole.
2. Hook the other end of the tube to your can of compressed air.
3. Start pumping air into the ball. Pump the air in short bursts – otherwise, the expanding gas will absorb heat from the can, cooling it down.

Compressed air works well when the ball is just slightly underinflated. If you need to inflate a ball fully, then you’ll probably need to go through several cans of compressed air. If you have no other option, this is fine, but you should avoid doing this often since you’ll literally be wasting your money by chewing through compressed air.

3. Use a balloon to inflate your basketball

Another popular way of inflating balls without a needle is to use a balloon. This method can be a little finicky, but it’s at least worth a shot if you can’t use other methods.

For this method, you will need:

• A balloon, preferably a larger one.
• A thin straw or anything else that can fit into your basketball’s air hole.
• A paper clip or clamp.

And here’s how you would use a balloon to inflate your basketball:

1. Inflate the balloon as much as you can.
2. Seal the balloon with a paper clip or clamp.
3. Insert your thin straw into the balloon’s hole. 
4. Insert the other end of the straw into the basketball’s air hole.
5. Remove the paper clip/clamp to let the air move from the balloon to the ball. I recommend that you hold the balloon to keep it from shooting itself away.
6. Depending on the balloon’s size, you may need to pump it several times to get the ball inflated.

I personally don’t really like this method. It requires plenty of tools – you may not have a balloon or a straw thin enough for the ball’s air hole lying around. Besides, the air may leak into your room rather than go into the basketball. 

You could make this method work, but it requires a lot of effort.

4. Use a pen ink tube to craft a needle

Finally, you may try to craft a temporary needle from a pen ink tube. This method is relatively simple and is a great option if the previous methods don’t work.

You will need four things:

• A metal paper clip coated in plastic.
• A ballpoint pen, ideally with little remaining ink so that you don’t have to drain it. 
• Tape.
• Scissors.

This method has been proposed by Flickr user Wendel Fisher, so all credit goes to them.

And here’s how you make a homemade ball needle:

1. Take your pen apart and remove the ink tube. Keep the writing cap – you’ll need it later to connect the DIY needle to the pump.
2. You need about an inch of tube free of any ink. If necessary, drain the tube by removing the writing point and then clean the tube by running alcohol through it.
3. Use your scissors to cut about an inch of the tube.
4. Insert the ink tube into the writing cap.
5. Straighten your paper clip and insert it into the air hole of the ball.
6. Cut around the edges of the clip’s plastic coating and pull the metal wire out. The plastic coating should remain inside the ball.
7. Insert the plastic coating into your writing cap from the pointy end and tape the area to seal it.
8. Place the writing cap against the end of the pump and seal it with some tape.
9. Firmly holding your improvised “needle”, start slowly pumping the ball. You may need a friend to hold the needle in place while you are pumping.

This is a pretty complicated way of solving a rather simple problem, but if you need a pumped ball and have no other options, it should work just fine.

Other Useful Basketball Articles

Can You Pump Up A Basketball At The Gas Station?

You can inflate your basketball at a gas station, but you probably won’t be able to do so without a needle. So within the context of this guide, pumping your ball at a gas station isn’t an option. But if we were talking about pumping balls without a pump, then it would work.

You could pay a visit to a bike shop if there is one nearby. If you are outdoors and don’t have any tools with you, this would be an ideal option.

If the guys at the shop aren’t too busy, they should be able to help you. You should probably also pay them or purchase something (a needle, for example) just to be polite.

The 4th Quarter

If you need to pump your basketball often, then after you are done inflating it without a needle, do yourself a favor and buy a needle/pump – you won’t have to deal with any balloons or compressed air anymore.

You’d be just wasting your time if you were to stick to the listed methods rather than inflate balls the way they are supposed to be inflated.

How to Pump a Basketball Without a Needle (3 Methods)

When shooting hoops by yourself or playing basketball with your friends, there are few things worse than your ball going flat. While it would be great if everyone had a needle and basketball pump at all times, that isn’t always the case.

I can think of several times where my friends and I had to cut a game short due to no one having a needle to inflate the ball. It’s annoying and also incredibly frustrating. Thankfully, there are a number of different ways you can pump up a basketball (whether indoor or outdoor) without needing to have a needle at all. This guide is going to look at a few of them.

Quick Navigation

Method 1: Use a Can of Compressed Air

Best to use for: If you are without a needle and pump, a can of compressed air is probably the quickest and easiest way to fill up your ball. It offers you something very similar to the needle, so getting the air in the ball will be simple. Of course, you likely need to be at home for this to work as very few people take compressed air out with them. Even then, however, it is easy enough to go to a store near where you are and get a can of compressed air for a very affordable price.

Things to prepare:

• The ball
• Can of compressed air (make sure it isn’t empty)
• Potentially a second can if your ball is incredibly flat

How to do:

1. Put the end of the straw of the can into the basketball. It should fit quite easily.
2. Slowly start to press the trigger to allow the air to go inside the ball. Do it slowly and carefully for the best results. Once the ball is inflated to the desired amount, take out the straw and hit the courts!

Method 2: Utilize a Balloon

Best to use for: This is great for people who are at home, as most of us have some balloons lying around. It is quite easy and quick but does require the use of a few other items like a thin straw, and a paper clip or clamp. It’s not great for those who are out at a public court, as you likely don’t have balloons with you.

Things to prepare:

• The ball itself
• The balloon (likely more than one to be safe)
• A paper clip or clamp
• A thin straw or a coffee stirrer

How to do:

1. The first thing to do is to blow up the balloon with an ample amount of air.
2. Once the balloon is blown up, don’t tie it like you normally would, but use the clamp or paper clip to close it up temporarily.
3. Next, you need to connect the thin straw or stirrer to the balloon, and put the other into or at the air hole of the ball.
4. Once the clip is taken off, the air should begin to flow through the straw into the opening of the ball, inflating it.
5. Do this as many times as it takes to get your ball to an air level that you are comfortable with. It might take a couple of balloons.

Method 3: Go to a Bike Shop or Gas Station

Best to use for: This is a great option for you if you are out and about, and don’t have a pump, needle or anything like that at home. If you don’t have the materials for the other two methods, this could work. Going to a bike shop or gas station is a good idea as they have air pumps and might even have the attachment you need. This method is very easy and simple but could take a while to find a gas station or bike shop nearby. Also, they might not have the needle attachment so it couldn’t hurt to call ahead.

Things to prepare:

• The ball
• Find a safe way to get to the shop or station
• Potentially pick up a basketball needle if they don’t have them

How to do:

1. Get to the bike shop or gas station, after calling ahead to ensure they can help you.
2. Use the correct attachment to inflate the ball to your liking.
3. Be sure to thank them if they don’t charge you. Also, consider buying something small for their kindness.

Final Words

We hope that this guide has been able to help you learn how to pump up a basketball without a needle. When trying any of the aforementioned, be sure to do it safely to protect yourself and your basketball.

Have a method that wasn’t mentioned here? If so, let us know in the comments below.

4 easy ways :: SYL.ru

Slightly modern 2000s varsity looks are the main fall trend

Coffee Nails is a fresh fall micro-trend: new coffee nail art

Fabric headband: hairstyles for curly hair for the New Year's Eve party

Little sparkly dress: how to wear a sparkling mini to look stylish

"Strengthen" shampoo with rosemary: how to prevent hair loss and brittle hair

No-hassle Hollywood Curls: Get Conditioner and Socks

Avoid Waterline Eyeliner: Makeup Tips for Sensitive Eyes

Knit Dresses: Showy Fall Models for Different Body Types

Double Denim Thursday: What to Wear Baggy jeans everyday

Special bag or hand wash. How best to wash a bra

Author Yulia Abdulbarova December 30, 2017

Almost every ball - football, volleyball, children's, basketball, gymnastics - is suitable for use only when it is properly inflated with air. Therefore, a special pump, a needle, and sometimes even silicone grease are often sold with it. But imagine that all this is simply not at hand. How to pump up a ball without a needle? We have selected for you several effective folk methods.

Method 1: Compressor

How to inflate a ball without a needle? Contact any of the car services in your locality - workers will help you for free or for a nominal amount. Do not ignore tire shops: there will definitely be powerful compressors for pumping car tires. One thing: there is a risk of pumping the product with air, which will lead to its damage or even explosion.

Compressor - equipment from which air is released under pressure. Therefore, this is a perfect answer to the question: "How to inflate a ball without a needle and a pump?" If possible, it is recommended to carry out the procedure together: one person will turn the compressor on and off, and the second person will hold the ball and press the cord, controlling the process of air intake. The hose with the nozzle is pressed tightly against the valve, after which the device turns on at full power. It must be deactivated immediately as soon as the surface of the ball becomes hard. That's all!

We also draw your attention to the fact that many models of car compressors have special nozzles for pumping balls with air.

Method No. 2: electrical tape, syringe needle, bicycle pump

The tools here are among the most affordable: a bicycle pump is in almost every home, you can easily buy electrical tape in a manufactured goods store, hypermarket, a syringe in a pharmacy. How to pump up a ball without a needle in this way? Easier than simple:

1. Take a needle from a syringe - first of all, you need to grind its sharp tip on asphalt, brick, stone, curb or with a special knife. Too sharp, it will easily pierce the nipple, which will make the ball unusable. The best would be a needle for blood transfusion systems - it is thick, durable, does not bend.
2. In the second step, you make a kind of adapter from electrical tape - 10-12 layers of it are enough. They need to be wound tightly so that the air does not come out when pumping back.
3. How to inflate a ball without a needle? Attach the invention to a bicycle pump and proceed with the procedure.

Method No. 3: syringe

How to inflate a ball without a needle - volleyball, basketball, football? Use a large medical syringe! This is in the most extreme case, because the method is quite exhausting - you will spend about 2 hours on the procedure.

As with the second method, you will need to blunt the needle, otherwise you will damage the nipple and the ball will deflate all the time. Which syringe to choose? The more, the better:

• It's really possible to inflate the ball with 20-cubic meters in 30-40 minutes.
• 10cc syringe will keep you busy with the ball for one to two hours.

Before starting the procedure, we recommend that you treat the nipple with silicone grease - this will protect it from damage by an imperfect needle from a syringe. It is simple to act: insert the needle into the hole, pressing the lever of the syringe, release the air. Then remove the tool, return the lever to its original position and repeat the procedure.

Method 4: Needle but no pump

We've figured out how to inflate a ball without a needle (basketball, volleyball, football, etc.) But what if you have one (or you made your own needle), and is there no pump? We offer the following instruction:

1. The pump will be replaced by an ordinary plastic bottle from a carbonated drink. As a last resort - a dense plastic bag without holes.
2. Now you need to screw the needle into the cork of the container or solder it. This will be the switch. Check that it does not let air through.
3. Then lubricate the ball nipple with silicone grease.
4. But now you need to pump air with your hands (or, if you prefer, with your feet) into our homemade pump, from where it will flow through the needle into the ball.

Other ways

Here are some more tips:

• If you can't find a medical syringe, you can replace its needle with an empty ballpoint pen.
• If you managed to pump up the ball just a little, then you can restore its hardness and elasticity like this: just hold it for a while in hot water. From this, the air inside the product will heat up, which will expand, which will complement the effect of jumping.
• Silicone nipple grease can be replaced with machine oil.
• The needle can be attached to the cap of a plastic bottle for a homemade pump with a glue gun.
• Instead of a compressor, bicycle pump, bag or bottle, you can also use a regular rubber bulb.
• A compressed air bottle, car spare tire or trash bag can also act as a pump.

So we have sorted out all the available ways to pump any ball with an air valve, if there was no pump and a special needle nearby. Contact a car repair shop, wield a medical syringe, build your own tool - choose what is most suitable for you.

Related articles

• How to make a gel ball at home? How to make glowing balloons?
• Gym wheel: how to train properly
• How to choose a fitness ball?
• How to choose a car pump. Car pump from the cigarette lighter
• What is a fitball? Types, features and a set of exercises
• How to pump up the "Brazilian ass"? Gluteus Maximus Exercises
• Benefits of experimenting at home

Also read

How to lower the ball so as not to spoil it?

0 27   

Azteca balls 12/27/2019

Proper care of sports balls will ensure long and trouble-free use without additional expenses. Manufacturers of sports equipment recommend using exclusively specialized equipment, but in some cases a soccer ball can be lowered with the help of improvised means. After the game, be sure to deflate the ball a little, because excessive pressure can damage it.

The most common consequences are deformation and weakening of the joints, stretching of the panels. This leads to a deterioration in the game characteristics of the projectile, the loss of the correct shape and a decrease in elasticity. In addition, a ball that is too inflated absorbs moisture faster, which can lead to deterioration.

Proven ways to deflate the ball with improvised means

Usually, a special needle is used for this purpose, which is sold with the pump, and also purchased separately. Its cost is low, so such a purchase will be fully justified. If it was not at hand, other improvised devices will help to replace the needle for the ball.

How to deflate a soccer ball:

1. With an empty refill from a ballpoint pen. It should be without a metal tip and ink inside. The process will take almost the same time as using a needle.
2. Narrow end of empty syringe. A little inconvenient, but completely justified way. At the same time, it is highly not recommended to use the needle itself, as it can pierce the camera.
3. Spoke from an old umbrella. The design of the spokes implies a groove in the middle through which air will pass.
4. Q-tip hollow tube. Use the same way as before.
5. Lubricator, dispenser or pipette tip. With the help of these devices, you can carry out the outflow of air.

Laminated or glued products do not have a nipple in their construction, therefore they are transported and sold inflated. Such balls do not deflate, and in case of accidental damage they practically cannot be restored.

Precautions

The nipple acts as a non-return valve, keeping the pumped air inside. If necessary, the pressure can be relieved by slightly pressing on its central part, which will lead to the opening of the hole. At the same time, the nipple is the most vulnerable part of the ball, so extreme care should be taken when using foreign objects when deflated.

Precautions:

• Often players use a toothpick, match, knitting needle, or any other thin object. In this case, an impromptu needle must be slightly deflected to the side for an unhindered exit of air. When doing this, extreme care must be taken not to damage the nipple inside the ball.
• Handy inventory should be slightly lubricated with oil, glycerin, or at least saliva. This is to prevent excessive tool pressure and damage to the nipple (check valve).
• Hold the fixture strictly perpendicular to the surface of the ball to prevent accidental damage to the nipple. When using fixtures without a cavity inside, the deviation to the side should be minimal. The deflation time will be somewhat longer, but the risk of accidental damage will be reduced.

YOU MAY BE INTERESTED IN OUR PRODUCTS

Add to cart

Add to cart

Add to cart

Add to cart

If there is no special needle, it is not recommended to use sharp objects, apply excessive force, loosen the nipple from side to side.

Learn more

• 
  Michael jordan teaches how to shoot a basketball
• 
  How to tryout for overseas basketball
• 
  How far is the 3 point line in youth basketball
• 
  How to be a better basketball player mentally
• 
  How to watch louisville basketball game tonight
• 
  How many players are in the basketball team
• 
  How much does a half court basketball cost
• 
  How many countries play basketball in the olympics
• 
  How many fouls are in basketball
• 
  How many teams in the big east basketball tournament
• 
  How play basketball better